ANTENNAS DIRECT MAX-V ClearStream Indoor Outdoor TV Antenna Instruction Manual
- May 15, 2024
- ANTENNAS DIRECT
Table of Contents
- ANTENNAS DIRECT MAX-V ClearStream Indoor Outdoor TV Antenna
- BOX CONTENT
- WALL BRACKET INSTALLATION
- MAST MOUNTING HARDWARE INSTALLATION
- CONNECTION INSTRUCTION
- TROUBLESHOOTING
- Before You Return, Call to Learn
- Antennas Direct® Inc. Lifetime Warranty
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ANTENNAS DIRECT MAX-V ClearStream Indoor Outdoor TV Antenna
READ BEFORE INSTALLATION:
Before permanently attaching the antenna to any surface, TEST RECEPTION in
that area. Connect the antenna to the 1V or converter box and run a full
channel scan. If reception is not as desired, move the antenna and rescan for
the available channels.
BOX CONTENT
The ClearStream MAX-V comes with:
- Antenna Element
- 2-VHFDipoles
- 2- Dipole Fasteners
- Antenna Base with Short Tube
- 60mm Bolt
- 30mm Bolt
- U-Bolt and Wing Nuts
- Mast Clamp and Back Plate
- Wall Screw and Anchor
- Wall Bracket
IMPORTANT: CHECK THE RECEPTION IN THE LOCATION WHERE YOU INTEND TO INSTALL
THE ANTENNA PRIOR TO ATTACHING THE WALL BRACKET OR A MAST TO ANY SURFACE.
WALL BRACKET INSTALLATION
MAST MOUNTING HARDWARE INSTALLATION
Before installing the antenna on a mast, adjust the mast so it is in a
vertical position.
You will need to adjust the antenna after it is mounted for the best
reception.
CONNECTION INSTRUCTION
TROUBLESHOOTING
- Problem: I’m not getting any signals at all.
1. Analog-only televisions (manufactured before 2007) require a digital converter box. You MUST perform a channel scan on the converter box.
2. SCANNING FOR CHANNELS: A digital 1V must be programmed in order to receive digital channels. Once your antenna is installed, you must complete a channel scan, even if you have done so before installing to find the best location for the antenna.
* YourlVmustbesettothe proper input source. Press the “Input” (or “Source”) button on your remote and make sure the input is set to lV.
* Follow the instructions specific to the make and model of your television or converter box to set the signal type to “ANTENNA”, “AIR’~ or “BROADCAST”, not “table”.
* Goto the main menu ofyourlVorconverterboxand complete a channel scan. This could be listed as “Auto Program”, “Auto Tuning”, or “Auto Channel Scan”. Consult the owner’s manual for your specific device and more precise guidelines. Be ready to experiment with various locations in your home. Remember to rescan for channels in every location.
3. Make sure the front of the antenna is facing the broadcast tower locations serving your area. Visit www.antennapoint.com for more information on broadcasters and tower locations serving your area, or download the free AntennaPointapptoyourAndroid/iOSsmartphoneortablet.
4. Outdoor Use: You do not have a clear line of sight to your local broadcast towers. You might need to elevate and/or move your antenna. Make certain the antenna is not aimed into physical obstacles such as a roof, building, or trees. Remember to rescan for channels in every location.
5. You are outside the range of your antenna’s capabilities. Depending upon the distance between your home and the local broadcast towers, you may need a longer range outdoor/attic antenna. Antennas Direct offers many models forth is purpose.
6. You may have loose coaxial cable connections. Check ALL connections for a tight fit and check all outdoor connections for moisture or corrosion.
7. Indoor Use: Building materials such as brick, metal siding, radiant barrier, or stucco can greatly reduce the incoming signal. If in an attic, move the antenna outdoors. If outdoors, make certain the antenna is not aimed into physical obstacles, such as buildings, trees, or a hill. Remember to rescan every time you move your antenna.
-
Problem: I’m receiving every channel except for one.
You may need to rescan the 1V tuner or converter box. The channel you are not receiving may have its transmitter lower on the broadcast tower or on a different tower than the other transmitters and your line of sight is obstructed. Try elevating the antenna or moving it to another location. Repeat as needed. -
Problem: I’m having signal breakups, but I’m only two miles from the broadcast tower.
YourlV may be receiving interfering signals. A larger/stronger antenna will not necessarily solve this problem. Consider moving the antenna, making sure it is not placed near metal objects or other antennas. If this is not successful, your signal may be too strong and may require the use of an attenuator. Call our helpline or chat with us online at antennasdirect.com for an analysis of your area and installation. We may be able to offer simple solutions.
Before You Return, Call to Learn
- For Tower Locations: antennapoint.com
- Input on Antenna Mode
- Scanning is a Must When in Doubt, Rescan
HELPLINE: 1-877-825-5572
Antennas Direct® Inc. Lifetime Warranty
- Antennas Direct® Inc. warrants this product against any defects in materials or workmanship for as long as you own the product. No warranty claim will be honored unless, at the time the claim is made, you present proof of purchase from an authorized Antennas Direct® Inc. dealer.
- Antennas Direct® Inc. will either repair or replace the defective product at no charge to you. This warranty covers parts but does not cover any costs incurred in the removal or reinstallation of the product. This limited warranty does not apply if the product is damaged or fails due to: misuse, improper installation, abuse, and modification of the product as originally manufactured by Antennas Direct.
- Antennas Direct® Inc. will not assume any liabilities for any other warranties, expressed or implied by any other person. The foregoing shall be the sole and exclusive remedy of any person, whether in contract, tort, or otherwise, and Antennas Direct® Inc. shall not be liable for incidental or consequential damage or commercial loss, or for any other loss or damage, as set forth above.
16388 Westwoods Business Park, Ellisville, MO 63021, USA