ninebot ES Series External Battery Pack for Electric Kick Scooters User Guide

ninebot ES Series External Battery Pack for Electric Kick Scooters

Specifications:

• External Battery
  • Item : External Battery
  • Nominal Voltage : To be specified
  • Max. Charging Voltage : To be specified
  • Charging Temperature: To be specified
  • Nominal Capacity : To be specified
  • Battery Management System : To be specified

Product Usage Instructions

Installing a Second Battery Pack:

1. Remove the three screws on the stem and the cover near the charge port.
2. Install the rail using the provided M4 (10mm) screws (3 pcs) and ensure it is properly fixed.
3. Install the external battery on the rail and secure it with the M4 (20mm) screws (2 pcs).
4. Block the screw holes with the rubber stopper after installation.
5. Verify that your KickScooter powers on and off.

Charging:

Charging Steps

1. Open the charge port cover.
2. Insert the charge plug.
3. Close the charge port cover when finished.

Charging Tips

• Avoid connecting the charger if the charge port or cable is wet.
• Your KickScooter is fully charged when the LED on the charger changes from red to green.
• Close the charge port cover when not charging.

FAQ

• Q: How can I check if the external battery is properly installed?
  • A : You can verify that the external battery is correctly installed by ensuring it is securely fixed on the rail and that the screw holes are blocked with the rubber stopper.
• Q: How do I know when my KickScooter is fully charged?
  • A : Your KickScooter is fully charged when the LED on the charger changes from red (charging) to green (trickle charge).

Installing a Second Battery Pack

Warning : please use the screws provided with this product only

Follow these steps when installing a second battery pack:

1. Remove the three screws on the stem, as shown. Then remove the cover near the charge port.
2. Install the rail with the M4 (10mm) screws (3 pcs), provided with this product. Please make sure it is properly fixed.
3. Install the external battery on the rail and fix it with the M4 (20mm) screws (2 pcs), provided with this product. After they are properly installed, block the screw holes with the rubber stopper.
4. Verify that your KickScooter powers on and off.

Charging

WARNING
Do not connect the charger if the charge port or charge cable is wet

Your KickScooter is fully charged when the LED on the charger changes from red (charging) to green (trickle charge).

Close the charge port cover when not charging.

Specifications

Documents / Resources

| ninebot ES Series External Battery Pack for Electric Kick Scooters [pdf] User Guide
ES1, ES Series External Battery Pack for Electric Kick Scooters, External Battery Pack for Electric Kick Scooters, Battery Pack for Electric Kick Scooters, Electric Kick Scooters, Kick Scooters, Scooters, ES2, ES4
---|---

References

• Home | Segway

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>