moa SB02 Sensor Bin Instruction Manual

: June 9, 2024
: moa

Table of Contents

moa SB02 Sensor Bin
Product Information
Usage Instructions
BEFORE USE
IMPORTANT SAFEGUARDS
PARTS AND LOCATION
PRODUCT INSTRUCTIONS
OPERATING MODE
MALFUNCTIONS AND SOLUTIONS
- DISPOSAL
WARRANTY
Documents / Resources

moa SB02 Sensor Bin

moa-SB02-Sensor-Bin-PRODUCT

Product Information

The Sensor Bin SB02 is an automatic, touchless waste bin designed for household use. It operates on 4-6 alkaline AA batteries and features a touch screen, auto-induction mode, delay closing mode, and manual open mode. The lid opens automatically within a range of 10-25cm from the touch screen and closes after a 5-second countdown. The product has a battery life of approximately 4 months when used 30 times a day and features safeguards to prevent injury or damage.

Usage Instructions

Before using the product, read the instruction manual carefully.
Connect the appliance to an earthed wall socket.
Install 4-6 alkaline AA batteries, paying attention to the polarity.
Take off the lid and inner ring of the bin.
Put a garbage bag into the body, making sure the bag’s mouth is around the outer ring.
Place the inner ring on top of the bag and put the bag’s mouth back into the body.
Press the ON switch and place the lid onto the body.
The product will operate in auto induction mode, opening automatically within a range of 10-25cm from the touch screen. The lid will stay open while within the range and will automatically close after a 5-second countdown once you leave the range.
In manual open mode, lightly touch the OPEN button to open the lid. To close manually, lightly touch the CLOSE button. If not touched, the lid will close automatically after 120 seconds in manual open mode.
If the product malfunctions, refer to the instruction manual for solutions or consult a local sales agent.

BEFORE USE

Before use, please read this manual carefully.
Only connect the appliance to an earthed wall socket.
This appliance is for household use only. When using electrical appliances, basic safety precautions should always be followed to avoid fires, electric shocks, burns, or other injuries and damage. Read these operating and safety instructions carefully

IMPORTANT SAFEGUARDS

Please pay attention to the polarity when you install the batteries.
Place the product in a dry indoor environment. Do not use it in hightemperature(over 45°C)or humid environment.
To better protect the motor, please do not close or open the lid directly with other forces. Lid will be closed aotumatically after 5 seconds.
This product adopts 4~6pcs of alkaline AA batteries which can be used for 4 months in proper situation(this is testing data of 30 times to open and close a day in laboratory, it will be different from practical situation due to various condition and environment.
If batteries run out or left unused for a long time please take them out or replace new ones in time to prevent over discharge or leakage.
Please keep the product away from heat, hard light and wind to avoid the mistake to open automatically.
Please do not replace unauthorized components or repair it by yourself.

PARTS AND LOCATION

Lid1. Lid
Touchscreen
Inner ring
Outer ring
Body
Switch ON/OFF
Battery compartments
Battery cover
Battery case

PRODUCT INSTRUCTIONS

Take off the lid and inner ring.
Put garbage bag into the body and make the bag mouth around the outer ring.
Place inner ring on and put back the bag mouth into the body.
Press switch on “-” and place lid onto the body.

OPERATING MODE

Auto induction mode:

The lid will open automatically when you come within 10~25 cm area in front of the touch screen,If under 10cm,it will not sense.
Delay closing mode: When the auto sensor is on, in induction area,the lid will stay open. After the person or object leaves, the lid will automatically close after a 5 seconds countdown.
Manual open mode: Lightly touch the OPEN button,the lid opens at once and stays open. To close manually, lightly touch the CLOSE button,the sensor bin will revert to the autoinduction mode. If not touch the CLOSE button, the lid will close automatically after 120s in manual open mode.

MALFUNCTIONS AND SOLUTIONS

Malfunction: The lid fails to open Solutions:

Check if the batteries are installed properly or if the batteries are in good contact with springs.
Check if the switch is turned on.
Leave the inductive area for 10 seconds and then try again.

Malfunction: The lid fails to close Solutions:

Check if there is interferent in the inductive area.
The circuit may be damp.Turn off the switch and put the lid in a ventilated place until it is dry then try again.

Malfunction: The lid opens very slowly Solutions:

The batteries are running low,pls replace with new ones.
Remarks: If the above solutions don’ t work,please consult local sales agency

DISPOSAL

Do not dispose of the device in normal domestic waste.
Dispose of the device over a registered waste disposal firm or through your communal waste disposal facility.
Observe the currently valid regulations. In case of doubt, consult your waste disposal facility.

WARRANTY

Dear Valued Customer,

Thank you very much for purchasing an MOA product.
We wish to inform you that this product is covered by a warranty which complies with all legal provisions concerning existing warranty and consumer rights in the country where the product was purchased.
Should you find any defect or malfunction of your MOA product, please contact the appropriate Customer Care Center.
Sincerely yours,
The MOA Team
www.moacolors.com