ECHOMASTER PCAM-BS2 Blind Spot Dual Side View Camera Kit Installation Guide
- June 9, 2024
- Echomaster
Table of Contents
ECHOMASTER PCAM-BS2 Blind Spot Dual Side View Camera Kit Installation
Guide
Blind Spot Dual Side View Camera Kit
2007-2018 Wrangler JK (BSCKIT JK)
2018-Up Wrangler JL I Gladiator JT (BSCKIT JWn
Installation Notes
Camera brackets are non-directional end can be installed on either side.
If the video source does not have multiple inputs and tum signal triggers, a PAC vs-41 is required.
To connect blind spot cameras to the JK factory display radio, a PAC BCI-CH21 and vs-41 is required.
Box Contents
- Blind Spot Cameras (2)
- Mounting Brackets (2)
- Camera Extension Cables (2)
- Camera PowerNideo Adapters (2)
- U-Shaped Camera Angle Adjustment Tool
- Warranty Card
Mounting The Cameras
Using a 1 Omm socket, loosen the front fender bolt (1) located inside the
door jamb.
Feed the camera cable through the bracket opening (2).
From outside the vehicle, carefully slide the camera mounting bracket between the fender and the door.
Route the camera cable behind the bracket and upward (3).
Slide the mounting bracket under the the 1 Omm bolt and washer. Hand tighten the 1 Omm bolt.
Align the bracket so it is flat against the fender and ensure the camera cable is routed in the space behind the bracket.
Tighten the 1 Omm bolt (1).
Aligning The Cameras
Using the U-Shaped Camera Angle Adjustment Tool, rotate the cameras so that
the White Mark is at the top.
Once the cameras are connected to a video source, they can be further adjusted
to ensure the image is straight and the viewing angle shows the vehicle’s
blind spot.
Wiring Overview
Once the cameras are mounted, route the camera cables into the engine compartment. Connect the Camera Extension Cables and route the cables into the vehicle to the video source. Connect the Camera Power/Video Adapters to the camera cables. Connect the Red wire to a switched 12V+ source and the Black wire to Ground. Connect the Yellow Video RCA cables to the appropriate inputs on the video source.
Camera Specifications
TECHNICAL SUPPORT:
Phone: 727-592-5991
Email: support@aampglobal.com
Chat: EchoMaster.com
CUSTOMER SOLUTIONS:
800-477-2267
0 2021 AAMP Global
Read More About This Manual & Download PDF: