Ansell ATORPLED4 Tornado IP65 20W 2300lm 4000K 1265mm Non-Corrosive LED Batten Instructions

June 9, 2024
Ansell

Ansell-logo

Ansell ATORPLED4 Tornado IP65 20W 2300lm 4000K 1265mm Non-Corrosive LED

Batten

Ansell ATORPLED4 Tornado IP65 20W 2300lm 4000K 1265mm Non-Corrosive LED
Batten-product

Product Information – ATORPLED4

The ATORPLED4 is a high-quality LED luminaire suitable for both internal and external use. It has a surface or suspended mounting option with a grey plastic housing and opal plastic cover. The luminaire has a protection class of I, an IP rating of IP65, and an impact strength of IK07.

Features

  • Lamp Type: LED
  • IP Rating: IP65
  • IK Rating: IK07
  • Class Protection: 1
  • Internal / External: Internal/External
  • Surface / Recessed / Suspended: Surface/Suspended
  • Warranty (Years): 7
  • CE Mark: Yes
  • Length (mm): 1265
  • Width (mm): 85
  • Height (mm): 70
  • Exceeds performance of standard T5 fluorescent.
  • Ultra slim IP65 LED NCF linear.
  • The unique base design caters for multiple installation methods.
  • Installer-friendly embedded features aid accurate and fast installation for any application.
  • Quick-release LED array/gear tray assembly provides the installer the means to faster installation/maintenance. Fast latching/permanently located stainless steel side clips ensure a quick and secure connection.
  • Tridonic LED driver as standard.
  • LED lifespan L80 B10 54,000 hours

Technical Information

  • Wattage : 20W
  • Lumens Delivered: 2331lm
  • Lm/W: 117lm
  • CRI: Ra 80
  • CCT: 4000K
  • Input: 230V, 50Hz
  • Operating Temp: Not specified

The ATORPLED4 is suitable for ceiling and surface mounting but not for wall mounting or built-in mounting. It has a maximum system power of 20W and a rated luminous flux of 2331lm with a colour temperature of 4000K and a color rendering index of 80-89. The luminaire comes with control gear and has no dimming function. It is not suitable for emergency lighting, movement sensor or light sensor.

Product Usage Instructions

When installing the ATORPLED4, ensure that the luminaire is mounted on a flat and stable surface. The luminaire can be installed either on the ceiling or surface-mounted. Before installation, ensure that the power supply is switched off.
Connect the ATORPLED4 to the electrical supply with a voltage of 230V and frequency of 50Hz. The luminaire comes with control gear and has no dimming function. The ATORPLED4 is suitable for both internal and external use as it has an IP rating of IP65 and is impact resistant with IK07 rating.
It is important to note that the ATORPLED4 is not suitable for wall mounting or built-in mounting. It is also not suitable for emergency lighting, movement sensors or light sensors.
The ATORPLED4 comes with a 7-year warranty and a CE mark, ensuring it meets all necessary EU safety standards.

General Information

  • Lamp Type
    • LED
  • IP Rating
    • IP65
  • IK Rating
    • IK07
  • Class Protection
    • 1
  • Internal / External
    • Internal/External
  • Surface / Recessed / Suspended
    • Surface/Suspended
  • Warranty (Years)
    • 7
  • CE Mark
    • Yes
  • Length (mm)
    • 1265
  • Width (mm)
    • 85
  • Height (mm)
    • 70

Technical Information

  • Wattage
    • 20W
  • Lumens Delivered
    • 2331lm
  • Lm/W
    • 117lm
  • CRI
    • Ra 80
  • CCT
    • 4000K
  • Input
    • 230V
  • Hertz
    • 50Hz
  • Operating Temp
    • -10°C to 40°C

Technical Data – ETIM – Ceiling-/wall luminaire (EC002892)

  • Suitable for wall mounting No
  • Suitable for suspended mounting Yes
  • Suitable for ceiling mounting Yes
  • Suitable for built-in mounting No
  • Suitable for surface mounting Yes
  • With light source Yes
  • Material housing Plastic
  • Color housing Grey
  • Material cover Plastic , opal
  • Nominal voltage 230-230 V
  • Control gear included Yes
  • No dim function Yes
  • Degree of protection (IP) IP65
  • Impact strength IK07
  • Protection class I
  • Suitable for emergency lighting No
  • With movement sensor No
  • With light sensor No
  • Max. system power 20 W
  • Rated luminous flux acc. IEC 62722-2-1 2331 lm
  • Color of light White
  • Color temperature 4000-4000 K
  • Color rendering index CRI 80-89
  • Luminaire efficacy 117 lm/W
  • Width 85 mm
  • Height/depth 70 mm
  • Length 1265 mm

Ansell ATORPLED4 Tornado IP65 20W 2300lm 4000K 1265mm Non-Corrosive LED
Batten-fig-1

Datasheet generated from https://onetimepim.com last updated Monday, September 6, 2021 2:00:55 PM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Ansell User Manuals

Related Manuals