dynamic BIOSENSORS 10X BUFFER PE140 PH 7.4 Running Buffer User Manual
- August 27, 2024
- dynamic BIOSENSORS
Table of Contents
dynamic BIOSENSORS 10X BUFFER PE140 PH 7.4 Running Buffer
Specifications
- Product Name: heliX+
- Buffer Type: 10X BUFFER PE140
- pH Level: 7.4
- Manufacturer: Dynamic Biosensors GmbH & Inc.
- Order Number: BU-PE-140-10
Product Description
The heliX+ is a running buffer designed for research use only. It has a limited shelf life, so please check the expiry date on the label before use.
Usage Instructions
Storage
Store the heliX+ buffer in a cool, dry place away from direct sunlight.
Preparation
Before use, ensure that the buffer is at the recommended pH level of 7.4.
If needed, adjust the pH using appropriate methods.
Application
Use the heliX+ buffer as a running buffer in your research experiments
according to your protocol.
Contact Information
If you have any questions or need assistance, you can contact
Dynamic Biosensors GmbH or Inc. at the following addresses:
- Dynamic Biosensors GmbH: Perchtinger Str. 8/10, 81379 Munich, Germany
- Dynamic Biosensors Inc.: 300 Trade Center, Suite 1400, Woburn, MA 01801, USA
You can also reach out via email:
- Order Information: order@dynamic-biosensors.com
- Technical Support: support@dynamic-biosensors.com
Product Description
Order Number: BU-PE-140-10
- For research use only.
- This product has a limited shelf life, please see expiry date on label
Preparation
- Dilute the complete solution 10x Buffer PE140 pH 7.4 (50 mL) by mixing with 450 mL ultrapure water.
- After dilution PE140 Buffer is ready for use (10 mM Na2HPO4/NaH2PO4, 140 mM NaCl, 50 µM EDTA, 50 µM EGTA and 0.05 % Tween20).
- The diluted buffer should be stored at 2-8°C.
Contact
Dynamic Biosensors GmbH
- Perchtinger Str. 8/10
- 81379 Munich
- Germany
Dynamic Biosensors, Inc.
- 300 Trade Center, Suite 1400
- Woburn, MA 01801
USA
- Order Information order@dynamic-biosensors.com
- Technical Support support@dynamic-biosensors.com
- www.dynamic-biosensors.com
Instruments and chips are engineered and manufactured in Germany.
©2024 Dynamic Biosensors GmbH | Dynamic Biosensors, Inc. All rights reserved.
FAQ
- Q: Can the heliX+ buffer be used for protein electrophoresis?
- A: Yes, the heliX+ buffer can be used as a running buffer for protein electrophoresis experiments.
- Q: What is the shelf life of the heliX+ buffer?
- A: The heliX+ buffer has a limited shelf life. Please check the expiry date on the label before use.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>