Neomounts FPMA-W400 TV Wall Mount Instructions Manual
- October 29, 2023
- Neomounts
Table of Contents
Neomounts FPMA-W400 TV Wall Mount
Dimension
Parts
INSTALLATION INSTRUCTION
STEP 1: Attach the VESA plate to the screen
STEP 2: Install the wall plate on a wall
STEP 3: Run cable through the cable cover
STEP 4: Adjust the torque
CAUTION
- To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
- The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
- The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquakes or typhoons.
- It is recommended that the mount be installed by qualified personnel only.
- At least two persons are needed to install or remove the product to avoid the hazard of falling objects.
- Please carefully inspect the area where the mount is to be installed:
- Avoid places that are subject to high temperatures, humidity or contact with water.
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted surfaces.
- Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation.
- To ensure a safe installation, first check the structure of the wall, ceiling or floor and select a secure mounting location.
- The wall, ceiling or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earthquake or another strong shock.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall, ceiling, or floor once the display and bracket are removed. Stains may occur after extended use.
- Since the manufacturer has no way to control the wall, ceiling, or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
- Please consult the English language manual for any dispute on conditions.
FAQ’s
What to consider when mounting a TV on the wall?
You must screw into studs when mounting a TV on the wall. Do not use hollow- wall anchors, as they cannot support the weight of TV wall mount brackets and the television. Once you’ve picked an ideal location for hanging a TV on the wall, run a stud finder along the top of the paper.
Does size matter with the TV wall mount?
Nope – size does not matter. 3. Know how much your TV weighs. TV Mounts have weight capacities – the mount you buy must be able to hold the weight of your TV or you could have a disaster
How long does a TV wall mount last?
A good quality wall mount that is the right size for your TV and is properly installed by a professional installation expert will last a lifetime.
Can a TV mount go on any wall?
Flatscreen TVs can be attached to any wall with fixed, tilting, or full-motion mounts. It’s always best to have solid studs to attach to, but you can still attach most TVs to walls that are hollow behind the drywall.
How much space do you need to mount a TV?
As a general guideline, the rear of the TV should be 2 to 6 inches away from the wall and the sides of the TV should have about 4 inches of ventilation space. WARNING: There is a risk of hardware damage.
Can you mount a TV anywhere?
TVs can be mounted virtually anywhere, even the ceiling! Superior mobility for best viewing angles — Get a tilting mount to turn your TV downward (especially above a fireplace or for gaming), or get full motion for watching from any spot in the room.
How long does it take to mount a TV?
Most TV mounting systems can be installed within an hour or two, though it may take longer to attach hardware to certain wall surfaces, such as brick, stone, tile, or concrete. If your pro needs to add blocking to the installation site for extra support, the job could take four hours or more.
How far can the TV mount extend from the wall?
These mounts can extend the TV off the wall, usually in the range of 15 to 30 inches, and can pivot the screen to either side.
What is the disadvantage of a wall-mount TV?
Wall mounting may also make it difficult to access ports at the back of the TV, since most wall mounts are low profile and keep very little gap between the TV and the wall. This could also create issues in connecting equipment to the TV or will need special cables to do so.
Where to hang the TV on the wall?
LED TVs are designed to be watched straight in front, so wall-mounting your TV directly in front of your viewing area is ideal. If the TV is mounted in a corner or off-center from your seating area, consider using a full-motion TV bracket so that you can angle the TV to get a better viewing angle.
Is it difficult to mount a TV?
It’s a pretty simple process, but doing it right will be the difference between an attractively mounted TV and one that may not sit right, or even damages the TV. Once you’ve settled on the perfect spot on the wall, you’ll need to find the studs to mount the bracket properly.
Are TV mounts safe?
If TV mounts are not designed properly, they have the potential to harm someone. This includes children and pets, who tend to sit close to televisions, where they are at risk of having the television fall on them if the mount cannot support its weight.
Download the PDF Link:Neomounts FPMA-W400 TV Wall Mount INSTRUCTION MANUAL