Neomounts FL15-750WH1 Tablet Stand Instruction Manual
- June 1, 2024
- Neomounts
Table of Contents
Neomounts FL15-750WH1 Tablet Stand
Product Information
Product Specifications
- Dimensions: 343mm x 339mm x 226mm
- Weight: 1130mm
- Maximum Load Capacity: 1074mm
- Material: Metal
- Colour: White
- Compatible Tablet Sizes: Various, with corresponding panels
Product Usage Instructions
-
Step 1: Assembling the Parts
Refer to the parts list and assemble components A to R using the specified tools. -
Step 2: Attaching Adapter Plate and Holder
Attach the adapter plate and holder to the column as instructed in multiple languages. -
Step 3: Mounting the Tablet Holder
Remove the cover and securely place the tablet in the holder ensuring proper alignment. -
Step 4: Attaching the Panel
Attach the panel to the holder using screws (H) and adjust the claws for tablet support and visibility. -
Step 5: Choosing the Correct Panel
Select the appropriate panel based on your tablet model as listed in the manual. -
Step 6-9: Power Strip Installation
Insert the power strip into the compartment, route the cable, and follow language-specific instructions. -
Step 10: Mount Installation
Install the mount on a concrete or brick floor following the specific measurements provided in the manual.
Frequently Asked Questions
Q: Can I use this mount for any tablet size?
A: The mount is compatible with various tablet sizes, but you need to choose the correct panel according to your tablet model.
Q: Are all the required tools included in the package?
A: Yes, all necessary tools for assembly are included except for the ones marked as Not Included in the manual.
Q: What is the weight limit for this mount?
A: The maximum load capacity of this mount is 1074mm.
Dimension
PARTS LIST
FL15-750WH1
INSTALLATION INSTRUCTION
-
STEP 1
Attach the column to the base
-
STEP 2
Attach the support elements to the base -
STEP 3
Attach the adapter plate and holder to the column
-
STEP 4
Unlock the holder
-
STEP 5
Remove the cover and place the tablet in the holder
-
Attach the panel to the holder using 4 screws (H). Adjust the two claws, before completely tightening the screws, to hold the tablet and to ensure the screen is aligned and visible through the front panel.
-
The panel number is indicated on the panel itself.
Choose the corresponding panel according to the tablet: -
Panel 1: For 9,7” iPad 5/6, iPad Air 1/2 & iPad Pro (Gen 1)
-
Panel 2: For 10,2” iPad 7/8/9 & 10,5” iPad Air 3, iPad Pro (Gen 2)
-
Panel 3: For 11” iPad Pro (Gen 3/4/5) & 10,9” iPad Air 4
-
Panel 4: For 10,4” Samsung Galaxy Tab A7
-
Panel 5: For 10,1” Samsung Galaxy Tab A
-
Panel 6: For 10,4” Samsung Galaxy Tab S6
-
-
STEP 6
Unlock the power strip compartment -
STEP 7
Insert the power strip into the compartment and route the cable
-
STEP 8
Lock the power strip compartment
-
STEP 9
Install the mount on a wooden floor
-
STEP 10
Install the mount on a concrete brick floor
SAFETY CAUTION
- To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
- The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
- The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquakes or typhoons.
- It is recommended that the mount be installed by qualified personnel only.
- At least two persons are needed to install or remove the product to avoid the hazard of falling objects.
- Please carefully inspect the area where the mount is to be installed:
- Avoid places that are subject to high temperatures, humidity or contact with water.
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted surfaces.
- Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation.
- To ensure safe installation, first check the structure of the wall, ceiling or floor and select a secure mounting location.
- The wall, ceiling or floor should be strong enough to sustain a weight of at least four times the display and mount combined. The mounting location must be able to withstand earthquakes or other strong shocks.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.
- Since the manufacturer has no way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
- Please consult the English language manual for any dispute on conditions.