Genius Scorpion M6-400/600 Gaming Mouse User Guide

Scorpion M6-400 / 600

http://www.geniusnet.com

Hardware Installation

1. Your computer should be off. Now connect the gaming mouse to any USB port of your PC (it takes a few seconds for your mouse to be properly installed).
2. Turn on your computer.

Remark: Do not use the optical/laser mouse on a desk which is made of glass or mirror.

Button Assignment

1. Left Button: Provides traditional mouse functions such as click double click or drag.

2. Right Button: You can assign this button to frequently used keyboard and mouse functions.

3. Middle button: Press this button to surf the Internet and Windows documents.
   a. Click middle key on a link to open the link in a new tab.

4. DPI adjustment:
   The LED color on the scroll wheel and DPI setting will be changed according to the order below.

Yellow
(Default DPI)| 1600| 1600| 1600
Green| 2400| 2400| 2400
Cyan| 3200| 3200| 3200
Blue| 5000| 5000| 5000
5. Scroll forward: Scroll up the page. 6. Scroll backward: Scroll down the page. 7. Front Side Key:
a.On IE and Chrome browsers: go to previous web page.
b.On some specific applications: previous page.

8. Rear Side Key:
   a.On IE and Chrome browsers: go to next webpage.
   b.On some specific applications: next page.

• The LED will be off when the mouse is moving and will turn on if idle for three seconds.

User Interface

1. Assignment Button: Assign a preset macro key to each defined button.
2. Manage Macro: Edit your own mouse function into one Macro key with delay time when needed.

Federal Communication Commission interference statement:

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installations. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient / Relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio / TV technician for help.

FCC CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

RF exposure warning: The equipment complies with RF exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Disclaimer

The following does not apply to any country where such provisions are inconsistent with local law: KYE Systems Corp. makes no warranties with respect to this documentation, whether expressed or implied. All material is provided “as is”. This includes, but is not limited to, any implied warranties of merchantability and fitness is for a particular purpose. The information covered in this document is subject to change without notice.

KYE Systems Corp. assumes no responsibility for any errors that may appear in this document.

All brand names mentioned in this manual are trademarks or registered trademarks of their respective companies.

Copyright © 2015 KYE Systems Corp. All rights reserved.

Symbol for Separate Collection in European Countries

This symbol indicates that this product is to be collected separately.

The following apply only to users in European countries:

• This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
• For more information, contact the retailer or the local authorities in charge of waste management.

KYE Systems Corp.

492, Sec. 5, Chongxin Rd., Sanchong Dist.,

New Taipei City 24160, Taiwan
Tel: 886-2-2995-6645
Fax: 886-2-2995-6649
Email: support@geniusnet.com.tw (Tech. Support)
http://www.geniusnet.com

Remark:
Product color and images shown on the package are for reference ONLY.
For actual items, refer to the physical goods contained herein. Limited hardware warranty. Warranty void if unauthorized opening or repair.
Product storage conditions: Temperature: -20°C~ 50°C / Humidity: 5%~ 85% .

12031666100-B

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>