Qilive Q.6729 Table Fan Instruction Manual

: June 9, 2024
: Qilive

Table of Contents

Qilive Q.6729 Table Fan
SAFETY INSTRUCTIONS
DESCRIPTION
INSTALLATION
USE
CLEANING & MAINTENANCE
GUARANTEES
Commercial guarantee exclusions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Qilive Q.6729 Table Fan

SAFETY INSTRUCTIONS

Before using this electrical appliance, carefully read these instructions and keep the user manual for future reference:

Before connecting the appliance to a wall socket, ensure that the local electrical current matches the one specified on the appliance’s nameplate. This appliance should only be connected to a grounded socket.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
This appliance is for indoor use only. Any other use (professional) is excluded.
This appliance can be used by children aged from 8 years and above and persons with reduced physical,sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
This marking indicates that this product should not be disposed with other household wastes throughout the EU.To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
Unplug the mains cable from the mains as soon as you stop using it and before any cleaning or maintenance operation.
Never remove the fan guards for cleaning or maintenance.
Do not submerge the appliance, mains cable or plug in water or any other liquid.
Warning: Do not use this appliance in or around bathtubs, showers, sinks, or other sources of water.
Caution: Do not use this appliance near water.
This appliance is not intended to be used through a remote control system or external timer.
Do not cover the product.
This appliance must be positioned on a flat surface for use. Do not turn it over while in use.
CAUTION: Keep all ventilation outlets around the appliance clear.
WARNING: Improper use of this appliance could result in injury.
WARNING: Avoid contact with moving parts. Never insert your fingers, any other part of your body or any object through the fan grille.
This appliance is intended for home use and for use in similar environments such as:
- kitchen areas for staff in shops, offices or other work environments;
- farms;
- by customers in hotels, motels and other residential environments;
- guest room type environments.
This appliance is not suitable for outdoor use.
The mains cable should be regularly examined for damage or deterioration. Do not use the appliance if the mains cable is found to be damaged.
Do not leave the appliance unattended while it is running

DESCRIPTION

Stand screw A
Base
Stand
Mains cable with plug
Engine unit
Oscillation knob
Rotary switch
Engine shaft
Rear guard
Four screws
Blade assmebly
Blade screw
Front guard
Engine screw A
Engine screw B
Stand screw B
Stand nut
Safety screw with nut

Fan power input(P): 42.2 W
Maximum fan flow rate (F): 39.56 m³/min
Service value (SV): 0.94 (m³/min)/W
Standby power consumption (PSB): 0.00 W
Fan sound power level (LWA): 60.5 dB(A)
Maximum air velocity (c): 2.66 meters/sec
Measurement standards for service value: EN IEC 60879

INSTALLATION

1.Fix the stand (3) to the base (2) Align and insert the stand (3) into the base (2), then tighten with the stand screw A (1). 2.Fix the engine unit (5) to the stand (3) Position the engine unit (5) on the top of the stand (3), then tighten the engine unit with the stand screw B (16), stand nut (17), engine screw A (14) , and engine screw B (15) while ensuring that the screws and the nut are correctly located. 3.Fix the rear guard (9) to the engine unit (5) Position the rear guard (9) onto the engine unit (5) while ensuring that the four lugs on the rear guard are aligned with the four holes on the engine unit, and the rear guard handle must be turned upward. Then tighten the rear guard with the four screws (10) and four washers. 4.Fix the blade assembly (11) to the engine shaft (8) Unscrew the blade screw (12) from the blade assembly (11). Slide the blade assembly exactly onto the notch of the engine shaft (8), and tighten the blade assembly with the blade screw while ensuring that the blade screw is positioned onto the flat part of the engine shaft. 5.Fix the front guard (13) to the rear guard (9) Position the front guard (13) over the rear guard (9) while ensuring that the small hole on the front guard edge is aligned with the small hole at the bottom of the rear guard. Tighten the front guard fastenings, then further fasten using the safety screw with nut (18) at the bottom of the guard.

USE

1.Connect the appliance’s mains cable (4) to the mains (220- 240V/AC, 50Hz). 2.Turn the rotary switch (7) to select a desired fanning speed. “I” stands for low speed, “II” for medium speed, “III” for high speed, and “0” for stop. 3.Press down on the oscillation knob (6) to activate oscillation, and pull up on it to deactivate. 4.To change air direction upward or downward, loosen the stand nut (17) to change the direction of the engine unit, then retighten the stand nut.

CLEANING & MAINTENANCE

Always unplug the appliance before cleaning. Clean the appliance with a soft, dust-proof cloth. You can use a vacuum cleaner to remove dust and lint trapped in the ventilation grilles. Never use harsh cleaning products. Prevent the appliance from coming into contact with acidic substances. Store away from dust and freezing temperatures.

GUARANTEES

Guarantees and limitations of liability
Products are guaranteed for a period of 36 months from the date of purchase, or from the date of delivery to the customer’s home. Depending on the country, this guarantee consists of 24 to 36 months of validity for the legal compliance guarantee. For countries that only implement a 24-month legal compliance guarantee, a 12-month commercial guarantee is applied at the end of the first guarantee, and supplements it. \

Guarantee application procedure
For the legal compliance guarantee Please consult your retailer for information and/or to refer to their GTCs (General Terms and Conditions of Sale). For the commercial guarantee Please go to the reception desk at your place of purchase with your proof of purchase (e.g. sales receipt), the product and the accessories it came with, and its original packaging, for all countries other than France. It is important to have the date of purchase, the model and the serial number or IMEI number to hand (this information is usually indicated on the product, packaging, or on your proof of purchase). You’ll need to bring back the product with the accessories needed for its correct functioning (power supply, adapter, etc.). If your claim is covered covered by the guarantee, the after-sales service may, within the limits of local law, either:

Repair or replace faulty parts.
Exchange the returned product with a product that has, at the least, the same features and that offers equivalent performances.
Refund the product at the price stated on the proof of purchase.
Repaired or replaced products may include new and/or re conditioned hardware and components.

Commercial guarantee exclusions

Damages or problems caused by improper use, accident, tampering/modification or an unsuitable current or voltage connection.
Use or storage conditions which are detrimental to the good conservation of the appliance (oxidation,corrosion), use of energy, use or installation non-compliant with the manufacturer’s instructions, or negligence or use of peripherals, software or consumables which are unsuitable.
Professional or collective, industrial or commercial use of the product.
Products that have been modified, or which have damaged, altered, erased or oxidised guarantee seals or serial numbers.
Replaceable batteries and accessories are guaranteed for 6 months.
Battery failure, caused by overcharging or by failure to follow the safety instructions set out in the manual.
Cosmetic damage, including scratches, bumps or vandalism.
Damage caused by any servicing operations carried out by non-authorised persons.
Faults caused by normal wear and tear or the normal ageing of the product: seals, filters, accessories,
vacuum cleaner brush and hose, lamps, overhead projector lamps, washing machine paddles, etc.
Software updates as a consequence of changes to net-work settings.
Damage caused by elements external to the appliance (foreign bodies, insects, etc.).
The contents of the devices – freezer, washing machine, – les fermes; etc. (food, clothing, etc.) –
Product failure caused by the use of third-party software to modify, change, adapt or alter the product as is.
Product failure resulting from its use without the ac-cessories supplied with the product or approved by the Manufacturer.
Parts for normal wear and tear or damage from use: tyre, inner tube, brake, etc.

The customer is responsible for regularly backing up the data contained on their hard disk or in the internal memory of their device, and this before any claim is submitted.
Auchan cannot be held liable for the loss or destruction of stored data, nor may it be held liable for damage caused to software resulting from, in particular, a restoration or a breakdown.
Similarly, Auchan is not required to check that SIM/SD cards have been removed from returned products.
Under no circumstances shall the provisions set out above reduce or eliminate: the legal guarantee referred to above, and the manufacturer’s commercial guarantee, if ap-plicable (see guarantee form).