EGO LBPX8000 56 Volt Lithium Ion Commercial Backpack Blower User Manual

COMMERCIAL

OPERATOR’S MANUAL
56-VOLT LITHIUM-ION COMMERCIAL BACKPACK
BLOWER
MODEL NUMBER LBPX8000/LBPX8000-FC

READ ALL INSTRUCTIONS!

READ & UNDERSTAND
INSTRUCTION MANUAL

WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of California to cause  cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

SAFETY GUIDELINES

SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
WARNING: Be sure to read and understand all safety instructions in this Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,” and  “CAUTION” before using this tool. Failure to following all instructions listed below may result in electric shock, fire, and/or serious personal injury.

DAMAGE PREVENTION AND INFORMATION MESSAGES
These inform the user of important information and/or instructions that could lead to equipment or other property damage if they are not followed. Each message is preceded by the word “NOTICE”, as in the example below:
NOTICE: Equipment and/or property damage may result if these instructions are not followed.
  WARNING: The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool  operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend a Wide Vision Safety Mask for use over eyeglasses  or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.

IMPORTANT SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may appear on this product.
Read, understand, and follow all instructions on the machine before attempting to assemble and operate.

| Safety Alert| Precautions that involve your safety.
---|---|---
| Read Operator’s Manual| To reduce the risk of injury, user must read and understand the operator’s manual before using this product.
| Long Hair| Failure to keep long hair away from the air inlet could result in personal injury.
| Loose Clothing| Failure to keep loose clothing from being drawn into air intake vents could result in personal injury.
| Eye Protection| Always wear safety goggles or safety glasses with side shields and a full face shield when operating this product.
| Keep Bystanders Away| Keep all bystanders at least 50 ft. (15 m) away.
| Recycle Symbol| This product uses lithium-ion (Li-Ion) batteries. Local, state, or federal laws may prohibit disposal of batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.
IPX5| Ingress Protection Degree| Protection from water jets
V| Volt| Voltage
min.| Minutes| Time
CFM| Cubic Feet per Minute| Air volume
MPH| Miles per Hour| Air velocity
****| Direct Current| Type or a characteristic of current

When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT!
WARNING: To ensure safety and reliability, all repairs should be performed by a qualified service technician.

WARNING: To reduce risk of fire, electric shock, or injury:

• Know your power blower. Read the instruction manual carefully. Learn the blower’s applications and limitations, as well as the specific potential hazards related to this  blower. Following this rule will reduce the risk of electric shock, fire, or serious injury.

• Do not allow the blower to be used as a toy. Close attention is necessary when used by or near children.

• Use only as described in this manual. Use only manufacturer’s recommended attachments.

• If the blower is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.

• Do not handle the charger, including charger plug, or charger terminals with wet hands.

• Do not put any object into any openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.

• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. Loose clothes, jewelry, or long hair can be drawn into air vents.

• Secure long hair above shoulder level to prevent entanglement in moving parts.

• Use extra care when cleaning on stairs.

• Do not charge the battery pack outdoors.

• Do not leave blower unattended when the battery is inserted. Remove the battery when the blower is not in use and before servicing.

• Do not operate blowers in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Blowers create sparks which may ignite the dust or fumes.

• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance.
  Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents.

• Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing appliance. Such preventive safety measures reduce the  risk of starting the appliance accidentally.

• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another  battery pack.

• Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

• When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection  from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek  medical help. Liquid ejected from the battery may cause irritation or burns.

• Do not use a battery pack or appliance that is damaged or modified.
  Damaged or modified batteries may exhibit unpredictable behavior resulting in fire explosion or risk of injury.

• Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 265°F (130°C) may cause explosion

• Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.

• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.

• Do not modify or attempt to repair the appliance or the battery pack (as applicable) except as indicated in the instructions for use and care.

• Use only with battery packs and chargers listed below.
  BATTERY PACK| CHARGER
  ---|---
  BA1400, BA1400-FC, BA2800, BA2800-FC,
  BA4200, BA4200-FC, BA1400T, BA1400T-FC,
  BA2240T, BA2240T-FC, BA2242T, BA2242T-FC,
  BA2800T, BA2800T-FC, BA3360T, BA3360T-FC,
  BA4200T, BA4200T-FC, BA5600T, BA5600T-FC,
  BA6720T, BA6720T-FC| CH2100, CH2100-FC,
  CH3200, CH3200-FC,
  CH5500, CH5500-FC,
  CH2800D, CH2800D-FC,
  CH7000, CH7000-FC

•  Stay alert, watch what you are doing and use common sense when operating a power blower. Do not use the blower while tired, upset, or under the influence of drugs, alcohol, or medication. A moment of inattention while operating blowers may result in serious personal injury.

• Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

• Do not use on a ladder, rooftop, tree, or other unstable support. Stable footing on a solid surface enables better control of the blower in unexpected situations.

• Always take care of your feet, children, or pets around you when removing the battery pack from blower. Serious injury could result if the battery pack falls. NEVER remove the battery pack when in a high position.

• Do not use the blower if switch does not turn it on or off. A blower that cannot be controlled with the switch is dangerous and must be repaired.

• Turn off all controls before removing the battery.

• DO NOT attempt to clear clogs from the unit without first removing the battery.

• Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the blower’s operation. If damaged, have the blower serviced before using. Many accidents are caused by poorly maintained blowers.

• Keep the blower and its handle dry, clean and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any strong solvents to clean your blower. Following this rule will reduce the risk of loss of control and deterioration of the enclosure plastic.

• Always wear safety glasses with side shields. Everyday glasses have only impact resistant lenses. They are NOT safety glasses. Following this rule will reduce the risk of eye injury.

• Always wear eye protection with side shields marked to comply with ANSI Z87.1 along with hearing protect tion when operating this equipment.

• Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury.

• Protect your hearing. Wear hearing protection during extended periods of operation. Following this rule will reduce the risk of serious personal injury.

• Battery powered blowers do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery powered blower or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

• Wear heavy long pants, long sleeves and boots. Avoid loose garments or jewelry that could get caught in moving parts of the machine or its motor.

• Do not operate the equipment while barefoot or when wearing sandals or similar lightweight footwear. Wear protective footwear that will protect your feet and improve your footing on slippery surfaces.

• Do not incinerate the appliance even if it is severely damaged. The batteries can explode in a fire.

• Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.

• Keep firm footing and balance. Do not overreach. Overreaching can result in loss of balance.

• Check the work area before each use. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown by or become entangled in the machine.

• Do not point the blower tube in the direction of people or pets.

• Never run the unit without the proper equipment attached. Always ensure that the blower tube is installed.

• When not in use, the blower should be stored indoors in a dry, secure place out of the reach of children.

• Keep all bystanders, children, and pets at least 50 ft. (15 m) away.

• Blower service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury.

• When servicing a blower, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.

• Never use the blower near fires or hot ashes. Use near fires or ashes can spread fires and result in serious injury and/or property damage.

• Never use blower to spread chemicals, fertilizers, or any other toxic substances. Spreading these substances could result in serious injury to the operator or bystanders.

• Never place the blower on any surface, except a hard, clean surface when the engine is running. Gravel, sand, and other debris can be picked up by the air inlet and thrown at the operator or bystanders, causing possible serious injuries.

• Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan this tool to someone else, also loan these instructions to them to prevent misuse of the product and possible injury.
  SAVE THESE INSTRUCTIONS!

INTRODUCTION

Congratulations on your selection of the new 56V Lithium-ion powered blower. It has been designed, engineered and manufactured to give you the best possible dependability and performance.
Should you experience any problem you cannot easily remedy, please contact EGO customer service center 1-855-EGO-5656.
This manual contains important information on the safe assembly, operation and maintenance of your product. Read it carefully before using the product. Keep this manual handy so you can refer to it at any time.

SERIAL NUMBER ____
DATE OF PURCHASE _____
YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP THEM IN A SAFE PLACE FOR FUTURE REFERENCE

SPECIFICATIONS

32 min. (High speed)
120 min. (Low speed)
With EGO 56V Battery 2 x 7.5 Ah| 30 min. (Turbo)
40 min. (High speed)
150 min. (Low speed)
With EGO 56V Battery 2 x 10 Ah| 40 min. (Turbo)
52 min. (High speed)
200 min. (Low speed)
With EGO 56V Battery 2 x 12 Ah| 48 min. (Turbo)
63 min. (High speed)
240 min. (Low speed)
Recommended Operating Temperature| 5°F – 104°F (-15°C – 40°C)
Recommended Storage Temperature| -4°F – 158°F (-20°C – 70°C)
Blower Weight (Without battery pack, with tube)| 16.3 lbs (7.4 kg)

PACKING LIST

DESCRIPTION

KNOW YOUR BLOWER (Fig. 1)
The safe use of this product requires understanding of the information on the tool and in this operator’s manual, as well as knowledge of the project you are attempting.  Before use of this product, familiarize yourself with all operating features and safety rules.

Air-speed trigger
Starts/stops the blower and adjusts the air speed.
Speed Lock button
Allows the user to operate the blower without continuously pressing the air- speed trigger.
Turbo button
Temporarily increases the air speed to the maximum while at any speed setting.
Battery–release button
Releases the battery pack from the blower.
Latch
Locks the battery pack when installing it on the blower.
Tapered nozzle
Further concentrates the air flow and increases the air speed.
Adjustable support harness
Reduces user fatigue by distributing the weight evenly across the shoulders and back.
Blower-tube storage knob and tube-hanging groove
Provide secure storage of the blower tube when the blower is not in use.
Fuel gauge
Indicates the average charge capacity of the inserted battery packs.
Battery icon
Illuminates when the battery packs are inserted into the corresponding battery ports and the blower is turned on.

Illuminate for as long as the turbo button is depressed during operation.

Illuminates when the blower is on and the speed lock button is pressed briefly.
PEAK POWER™
This technology combines the power of up to two EGO 56V ARC Lithium™ batteries for longer run time and efficient power draw.

ASSEMBLY

WARNING: If any parts are damaged or missing, do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury.
WARNING: Do not attempt to modify this product or create accessories not recommended for use with this blower. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

UNPACKING

• Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.

WARNING: Do not use this product if any parts on the packing list are already assembled to your product when you unpack it. Parts on this list are not assembled to the  product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury.

• Inspect the tool carefully to make sure that no breakage or damage occurred during shipping.
• Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool.
• If any parts are damaged or missing, please return the product to the place of purchase.

ASSEMBLING THE BLOWER TUBES
WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack(s) from the blower when assembling parts.
Connecting the Control-Handle Tube to the Bellows (Fig. 2)

1. Insert the upper end of the control-handle tube into the bellows as far as it will go.
2. Using a flat screwdriver (not included), tighten securely the screw in the clamping collar fixed on the bellows.

Connecting the Blower Tube to the Control-Handle Tube

1. Loosen and remove the quick-release lever and wing nut from the tube clamp assembly fixed on the blower tube (Fig. 3a).
2. Align the groove in the blower tube with the rib on the control-handle tube, slide the blower tube over the control-handle tube as far as it will go (Fig. 3b).
3. Insert the pin of the quick-release lever and close the lever onto the tube clamp (Fig. 3c).
4. Tighten the wing nut to secure the tube clamp (Fig. 3d).

Connecting the Tapered Nozzle to the Blower Tube (Fig. 4a, 4b)

1. Align the groove in the nozzle with the latch on the tube. Push the nozzle over the tube until it securely snaps into place.
2. To remove the nozzle, press and hold the nozzle-release button to disengage the latch, then pull the nozzle straight from the blower tube.

OPERATION

WARNING: Do not allow familiarity with this product to make you careless.
Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING: Always wear eye protection with side shields that is marked to comply with ANSI Z87.1, along with hearing protection. Failure to do so could result in objects  being thrown into your eyes and other possible serious injuries.
WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.
Before each use, inspect the entire product for damaged, missing, or loose parts, such as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product until all missing or damaged parts are replaced.

APPLICATION
You may use this product for the purposes listed below:

• Clearing leaves and miscellaneous yard debris from lawns and mulch beds
• Clearing hard surfaces, such as driveways and walkways
• Keeping decks and driveways free from leaves and pine needles

TO INSTALL/REMOVE BATTERY PACKS
NOTE: Fully charge the battery pack before first use.
NOTE: For best performance, we recommend use of the EGO 56V Battery BA3360T /BA3360T-FC (6.0 Ah) or any EGO 56V battery with higher capacity.
WARNING: Always remove the battery pack(s) from the product when you are assembling parts, making adjustments, cleaning, or when not in use. Removing the battery  pack(s) will prevent accidental starting that could cause serious personal injury.
The blower has two active battery ports, located on the left and right side of the battery port housing.
NOTE: The blower can operate off of one or two batteries. Using two batteries gives you a longer run time and efficient power draw managed by PEAK POWER™ technology.
When the battery packs are inserted into the corresponding battery ports marked with 1 or 2 on the backpack plate, and the blower is turned on, the corresponding battery  icon will illuminate on the LCD screen (Fig. 5a).

To Install Battery Packs (Fig. 5b)

1. Align the ribs of the battery pack with the mounting slots in the blower’s battery port.
2. Press the battery pack down until it snaps into position.
3. Repeat the process to install the second battery pack.

To Remove Battery Packs
WARNING: Always take care to note the location of your feet, children, or pets when pressing the battery-release button. Serious injury could result if the battery pack falls. NEVER remove the battery pack when in a high location.

1. Press the battery-release buttons; the battery packs will disengage from the latch and the ejection mechanism will assist with removal.
2. Remove the battery packs from the blower.

POSITIONING THE BACKPACK BLOWER
WARNING: Dress properly to reduce the risk of injury when operating this machine. Do not wear loose clothing or jewelry. Wear eye and ear/hearing protection.
Wear heavy, long pants, boots and gloves. Do not wear short pants or sandals or go barefoot.
Before using the backpack blower, make sure that the operator is wearing eye protection and proper clothing and can maintain a secure and balanced footing.

To Adjust the Support Harness

1. Put your arms through the backpack straps to support the blower on your back.

2. Temporarily adjust both shoulder straps to comfortable positions (Fig. 6a), making sure that your elbow is comfortable.

3. Snap the chest buckle and adjust the chest strap length if necessary (Fig. 6b).

4. Snap the waist buckle and adjust the waist strap length so that the backpack is securely supported by your hips (Fig. 6c & 6d). NOTICE: The backpack shouldn’t sit too high on your back; it should be positioned closer to your hips than to your shoulders.
   WARNING: When emergency occurs, release the chest and waist buckles immediately to take off the backpack strap at each side, which is a quick release method.

5. Readjust the shoulder straps for security and comfort. Make sure that the backpack sits securely on your back, with the weight supported by the waist strap, and without  excess movement when you move (Fig. 6e).

6. Insert any extra length of the strap around the waist into the elastic on both sides (Fig. 6f).

7. To detach the backpack from your back, just press the waist and chest buckles to release them and lower the tool (Fig. 6g).

To Adjust the Control Handle

1. Release the quick-release lever to move the control handle forward or backward as needed (Fig. 7a & 7b) and then engage the quick-release lever to secure the control  handle in place.
2. You may also rotate the handle as needed for comfort (Fig. 7c).

To Adjust the Control-Handle Tube Length (Fig. 8a, 8b)

1. Release the quick-release lever.
2. Move the blower tube to a comfortable operating position within the adjustment zone.
3. Engage the quick-release lever to secure the blower tube in place.

STARTING/STOPPING THE BLOWER
Air-Speed Trigger (Fig. 9a, 9b)

• Depress the air-speed trigger to turn on the blower, then the LCD screen will display the fuel gauge, battery icon, air speed indicator.
• The air speed of the blower is controlled with the variable speed trigger. More pressure on the trigger results in higher blowing speeds; less pressure on the trigger  results in lower blowing speeds. Adjust the speed to suit the task at hand. The corresponding air speed icon will display on the LCD screen.
• Release the air-speed trigger to turn off the blower. The LCD screen will turn off 6 seconds after the trigger is released.

Turbo Mode
While the air-speed trigger is depressed and held, press the turbo button to increase the air flow to the maximum velocity (Fig. 9a). Both the turbo indicator and the fan icon will illuminate on the LCD screen (Fig. 9c).
NOTE: The blower will return to the previous speed when the turbo button is released.

Speed Lock Mode
The speed lock can be used to operate the blower without continuously pressing the air-speed trigger.

To engage the speed lock:

1. Depress the air-speed trigger until you reach the desired speed (Fig. 9a).
2. Press the speed lock button. The speed lock icon will illuminate on the LCD screen (Fig. 9d).
3. Then release the air-speed trigger, the blower will keep running.

While cruising control mode working press the turbo button to temporarily increase the air speed to the maximum level. The blower will resume the previous speed when the turbo button is released.

To release the Speed Lock
Press the speed lock button again. The speed lock icon will disappear from the LCD screen and the blower will turn off.

TIPS FOR USING THE BLOWER

• To keep from scattering debris, blow around the outer edges of a debris pile.
  Never blow directly into the center of a pile.

• To reduce sound levels, limit the number of pieces of equipment used at any one time.

• Use rakes and brooms to loosen debris before blowing. In dusty conditions, slightly dampen surfaces if water is available.

• Watch out for children, pets, open windows, or freshly washed cars, and blow debris safely away.

• After using blowers or other equipment, clean up! Dispose of debris properly.

MAINTENANCE

**WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. To ensure safety and reliability, all  repairs should be performed by a qualified service technician.
WARNING:** To avoid serious personal injury, always remove the battery pack from the blower before cleaning or performing any maintenance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
**WARNING:** Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

STORAGE

• Remove the battery pack(s) from the blower.
• Clean all foreign material from the air inlets of the blower.
• Align the blower-tube storage knob with the tube-hanging groove and hook the blower tube onto the battery port housing (Fig. 10a & 10b).
• Store in an enclosed space that is inaccessible to children. Keep away from corrosive agents, such as garden chemicals and de-icing salts.

TROUBLESHOOTING

There is no electrical contact between the blower and battery.
The battery pack charge is depleted.
The battery pack or blower is too hot.| Attach the battery pack to the blower.
Remove battery, check contacts and reinstall the battery pack.
Charge the battery pack.
Cool the battery pack and blower until their temperature drops below 152°F (67°C).
The air speed is noticeably reduced.| Excessive worn of motor fan.
The air inlet is blocked by debris.| Contact EGO service center for repair.
Remove the battery pack, clear the debris.
LCD Screen not functioning properly.| LCD assembly is broken or bad wire connection of the LCD assembly.| Have repairs performed by a qualified service technician.

EGO LIMITED WARRANTY

WARRANTY POLICY TERMS AND DURATION
Chevron North America, Inc. (“Chevron North America”) provides the following Limited Warranty for EGO products to the original purchaser of EGO products.
The detailed warranty period for each EGO product can be found online at http://egopowerplus.com/warranty-policy.
Please contact EGO Customer Service Toll-Free at 1-855-EGO-5656 any time you have questions or warranty claims or would like a hard copy of the warranty.

LIMITED SERVICE WARRANTY
EGO products are warranted against defects in material or workmanship from the date of original retail purchase for the applicable warranty period. For any properly and timely submitted warranty claim, if Chevron North America determines a product to be defective during the warranty period, the product will receive free repair or  replacement as determined by Chevron North America.

HOW TO OBTAIN SERVICE
For warranty service, within the applicable warranty period, please contact EGO customer service toll-free at 1-855-EGO-5656. When requesting warranty service, you must  present the original dated sales receipt. An authorized service center will be selected to evaluate and repair the product if defective according to the stated warranty terms.  When bringing your product to the authorized service center, there may be a small deposit that will be required when dropping off your tool. This deposit is refundable when the repair service is deemed to be covered under warranty.

ADDITIONAL LIMITATIONS & EXCLUSIONS
This limited warranty applies only to the original purchaser from an authorized EGO retailer and is not transferable. EGO products shall not be considered defective, and this warranty will not apply, where the claimed defect is attributable to any cause other than the above-defined defects. This warranty shall be void if the product has been used for rental purposes. This warranty shall not apply to damage caused by accident, abuse, misuse, alteration, modification, unauthorized repair, liquid contact, fire, earthquake or other external cause; operating the product outside EGO’s instructions, specifications or guidelines; or failure to properly service of maintain the product. This warranty also does not apply to cosmetic damage, including but not limited to scratches or dents; defects caused by normal wear and tear or otherwise due to the normal aging of the product.

THIS EXPRESS WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE OR USE, WHICH ARE DISCLAIMED. Any implied warranties, including warranties of merchantability or fitness for a particular purpose, that cannot be disclaimed under state law are limited to the applicable warranty period defined at the beginning of this article. The sole and exclusive remedy in connection with the purchase, installation, use, and/or performance of the EGO products is repair or replacement of the product as determined by Chevon North America. Chevon North America’s maximum liability shall not in any case exceed the purchase price paid for the product. CHERVON NORTH AMERICA SHALL NOT BE LIABLE TO THE USER OR TO ANYONE ELSE FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL, EXEMPLARY, INDIRECT, OR PUNITIVE DAMAGES ARISING FROM USE OF THE PRODUCTS, INCLUDING BUT NOT LIMITED TO PERSONAL INJURY, DEATH, PROPERTY DAMAGE, LOST PROFITS, OR OTHER ECONOMIC INJURY. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow limitations on how long an implied warranty lasts, the exclusion or limitation of incidental or consequential damages, or the limitations on time to bring certain actions, so such limitations contained herein do not apply to individual consumers in those states.

This warranty is subject to and shall be interpreted according to Michigan law without regard to principles of conflicts of laws. No legal action shall be brought against Chevron North America unless filed within one (1) year after the basis for such legal action becomes known, or with the exercise of reasonable diligence should have become known. Any action not timely filed shall be deemed waived.

For customer service contact us toll-free at: 1-855-EGO-5656 or
EGOPOWERPLUS.COM.
EGO Customer Service
769 Seward Ave. NW, Suite 102
Grand Rapids, Michigan 49504.

Documents / Resources

| EGO LBPX8000 56 Volt Lithium Ion Commercial Backpack Blower [pdf] User Manual
LBPX8000 56 Volt Lithium Ion Commercial Backpack Blower, LBPX8000, 56 Volt Lithium Ion Commercial Backpack Blower, Commercial Backpack Blower, Backpack Blower
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>