dp WIFIS9 RC DRONE User Manual
- June 9, 2024
- dp
Table of Contents
dp WIFIS9 RC DRONE
Product Information and Usage Instructions
Disclaimer and Safety Guidelines
The NEHEME product is designed for recreational purposes only and should be
operated with caution. The user is solely responsible for complying with all
flight regulations and ensuring safe and lawful practices while using this
product. NEHEME will not be liable for any damage, injury or legal
responsibility incurred directly or indirectly from the use of this product.
Maintenance and Care
To ensure the longevity of the product, it is recommended to regularly
clean the drone and transmitter after use. Keep the product in a dry and cool
place, away from direct sunlight and extreme temperatures.
Safety Guidelines
Check Before Use
Before each flight, ensure that all parts of the drone are securely
attached and functioning correctly. Check that the propellers are properly
attached and that the battery is fully charged.
Flight Environment
When flying the drone, it is recommended to do so in open areas with a
clear line of sight. Avoid flying near obstacles, crowds, high-voltage power
lines, trees, airports or bodies of water. Do not fly near strong
electromagnetic sources such as power lines and base stations as it may affect
the onboard compass. Do not use this drone in adverse weather conditions such
as rain, snow, fog, and wind.
Product Overview
Transmitter
The transmitter controls the drone’s movements and features one key taking
off/landing, emergency stop, trim and speed control functions.
Propeller
The drone includes four propellers that need to be correctly installed on
the corresponding motor shaft. Each propeller is labeled ‘A’ or ‘B’, and it is
essential to ensure that the correct propeller is installed on the correct
motor shaft for the drone to fly correctly.
Flight Preparation
Install the Remote Battery
The transmitter requires three 1.5V AA batteries, which are not included in
the package.
Change the Battery of the Drone
The drone battery is rechargeable and can be charged using a USB adapter
with a 5V 1-2A rating. When the battery is charging, the LED light on the USB
adapter will be on, and when it is fully charged, the LED light will turn off.
The battery should be installed into the drone only after it is fully charged.
Flight Operation Guide
Pairing
To pair the drone with the transmitter, long press the power button on both
devices until they are successfully paired.
Calibrate the Gyro
To ensure a stable flight, it is recommended to calibrate the gyro after
pairing the drone and after a crash.
Unlocking/Locking the Motors
To lock or unlock the motors, long press the emergency stop button twice in
quick succession.
One Key Take-off/Landing
To initiate take-off or landing, press the corresponding button on the
transmitter.
Emergency Stop
In case of an emergency during flight, long press the emergency stop button
for 3 seconds to immediately stop the motors. Be aware that the drone may
break if it falls from a large distance or hits anything at high speed.
Instructions of the Remote
The left control stick controls the drone’s altitude and rotation, while
the right control stick controls its forward/backward and left/right
movements.
DISCLAIMER AND SAFETY GUIDELINES
- DO NOT look directly into the drone light.
- DO NOT treat the product as household waste.
- DO NOT fly above or near obstacles, crowds, open water, public road, high-voltage power lines, or trees.
- DO NOT use the drone in severe weather conditions. These include wind, snow, rain, smog, hail, lightning, tornadoes, or hurricanes.
- Stay away from the rotating propellers and motors to avoid some tiny objects (e.g. hair) getting into them.
- This drone does not come with a GPS module. Please fly the drone within the control range.
- Be sure to observe all local regulations, obtain appropriate authorizations and understand risks. Please note it is solely your responsibility to comply with all flight regulations.
NEHEME accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. The user shall observe safe and lawful practices including, but not limited to, those set forth in these Safety Guidelines. NEHEME reserves the right to update this user manual.
MAINTENANCE AND CARE
- Thoroughly check the drone after a crash or violent impact.
- Do not charge the battery before it cools down.
- Remove the batteries if the product will not be in use for a long time.
- Do not overcharge the battery. Unplug the charger once it’s fully charged.
- Store the drone and remote in a cool, dry place away from direct sunlight.
- Do not charge the battery next to inflammable, such as carpet, timber floor etc., or on the surface of electro-conductive objects. Please always keep an eye on the battery while charging.
- Please use the original battery provided. Use an incorrect type of battery may lead to fire hazards.
- Do not dispose of the battery in fire or a hot oven, cut or mechanically crush the battery, as this may cause explosions.
- Do not leave the battery in an extremely high-temperature environment that can result in an explosion or the leakage of flammable liquid or gas.
- Do not expose the battery to extremely low air pressure, as this may result in an explosion or the leakage of flammable liquid or gas.
SAFETY GUIDELINES
Check Before Use.
- This product is a high-precision drone that integrates various electronic stability and control mechanisms. Please be sure to configure this drone carefully and correctly to ensure safe, accident-free operation.
- Ensure that the batteries of the drone and transmitter are clean, undamaged and fully charged before every use.
- Ensure that all the propellers are undamaged and are installed in the correct orientation.
- Ensure to do a thorough check of the product before each use. Inspect the integrity of the parts, any signs of cracks and wear of the propeller, battery power and effectiveness of the indicator, etc. If after doing a complete check of the drone any problems are found, please refrain from using it until the problem has been resolved.
Flight Environment
Avoid flying over or near obstacles, crowds, high-voltage power lines, trees,
airports or bodies of water. DO NOT fly near strong electromagnetic sources
such as power lines and base stations as it may affect the onboard compass
.
DO NOT use this drone in adverse weather conditions such as rain, snow, fog and wind.
OVERVIEW
Transmitter
Propeller
Connect each propeller to its corresponding motor shaft, either position ‘A/B’, then lock the propeller to the motor shaft with a screw.
- Pay attention to the ‘A’ or ‘B’ printed on each propeller. The drone will not fly unless the correct propeller is installed on the correct motor shaft.
FLIGHT PREPARATION
Install the remote battery
Change the battery of the drone
Install the battery into the drone after it’s fully charged.
- Insert the battery into the rear of the drone in the right direction (the tab on the battery should be facing up)
- Slide the battery all the way in, until it securely slots into place.
- Press ‘LOCK’ to lock the battery with a drone; press ‘UNLOCK’ before taking out the battery.
Tips:
- For your safety, please use the original battery and USB cable.
- If using a fast charge, the electric current may increase sharply and the rubber part may melt.
- Plug the USB charging cable into a USB charging port on the computer, power bank, or USB adapter(5V/0.5-2A).
- Free the battery of any sharp objects that could puncture the battery to avoid risks of explosions and fire.
- There is a continuous beeping sound from the remote when the battery of the remote is low.
- The LED on the drone will flash quickly when the battery of the drone is low. In about 30 seconds, the drone will land automatically.
- To extend the battery’s lifespan, recharge it at least once every three months if not using it for long periods of time.
FLIGHT OPERATION GUIDE
Pairing
- Long press the power switch to turn on the drone, and the indicator light of the drone will keep flashing.
- Place the drone on a flat and level surface with the head forward and the tail facing towards the pilot.
- Turn on the transmitter, and you will hear the ‘Di’ sound, then the indicator lights keep flashing.
- Push the throttle joystick up then down to pair the drone with the transmitter. The indicator light on the drone will turn solid if the drone is paired successfully.
Calibrate the Gyro
Move the Left Control Stick to the lower left at 45° and the Right Control Stick to the lower right at 45° At the same time, the indicator light on the drone will blink and turn solid which indicates the calibration is completed.
- To ensure a stable flight, we suggest that the pilot calibrates the gyro every time after pairing the drone and after a crash.
Unlocking/Locking the motors
- Unlocking the motors: Push two levers down to 45° as the picture shows, until four rotor blades start rotating.
- Locking the motors: Repeat this operation, the motors will stop immediately.
One key take-off/Landing
- After pairing/calibration, press the One Key Take-Off button, the drone will take off automatically and hover at 5 feet altitude.
- When the drone is flying, press the One Key Landing button again, and the drone will land on the ground automatically.
Emergency Stop
- The Emergency Stop function should only be used in case of emergency during the flight to avoid any damage or injury.
As shown above, long press the Emergency Stop button for 3 seconds, and the motor will stop immediately.
Attention:
Be aware that you risk breakage of the drone if it falls a large distance or
hits anything at a high rate of speed.
Instructions for the Remote
Left Control Stick
Right Control Stick
Flight Trimming
Altitude Hold/Hover
This is one of the default settings in the drone. When you release the Left
Control Stick after the ascending/descending action, the drone will hover at
the current flight height. For a stable flight, press the trim buttons to
adjust accordingly.
Headless Mode
Press the Headless button to activate the function. In this mode, the drone
will fly following the direction of the Right Control Stick regardless of the
position of your drone’s head or tail. The LED on the drone will flash and
there is a beeping sound from the remote. Press the same button again to exit
this mode.
- Please familiarize yourself with the Headless Mode function first before using this mode, otherwise, it is easy to lose the drone and cause unnecessary loss.
360 °Flip
After flying the drone to a height over 2 meters, press the 360 ° flip button
to activate 360 ° flip function. Then move the Right Control Stick
forward/backward/leftward/rightward to flip the drone accordingly.
- This function can’t be activated when the battery of the drone is low.
One key Reverse
Press the button, and then the drone will fly toward its back following a path
parallel to its original take-off path. When the drone is returning, the LEDs
on the drone keep flashing.
Speed Switch
The drone is set to low speed by default. Press the Speed button down once for
medium speed and there are two beeps from the remote. Press it down again for
high speed and there are three beeps from the remote. A third press will get
back to low speed and there is one beep from the remote.
| Speed | mph | km/h | m/s |
|---|---|---|---|
| Low | 1-3 | 1-5 | 0.3-1.5 |
| Mid | 4-7 | 6-11 | 1.6-3.3 |
| High | 8-12 | 12-19 | 3.4-5.4 |
- When you fly in high wind, please use high speed to control your drone.
App Operation Guide
- Download and install Video Drone on your mobile device from App Store/Google Play or scan the QR code below.
- Turn on the drone first, go to the WIFI settings of your mobile device, and connect to the wifi Video Drone Connnect_***
- Open Video Drone App. Tap START for the video viewing surface.
NOTE:
- If you want to fly the drone with the controller, then turn on the drone and controller for pairing together first.
- To fly the drone with the App, pair the drone with the app directly and keep the remote turned off all the time, then you can use the smartphone to control the drone flying.
- Do not take photos during the recording, which will interrupt the recording.
SPECIFICATIONS
Drone
Model Number| S9
Item Weight| 193g/6.8oz
Operating Temperature| 32°F to l04°F (0°C to 40°C)
Flight Time| 10~12 minutes (per battery)
Battery
Capacity| 1300mAh
Voltage| 3.7V
Battery Type| Li-Po battery
Charging Temperature Range| 41°F to l04°F (5°C to 40°C)
Charging Time| 150-180 minutes (Depends on charging power)
Transmitter
Operating Frequency| 2.4GHz
Max Flight Distance| 328 feet/100m (Outdoors and unobstructed)
Operating Temperature Range| 32°F to l04°F (0°C to 40°C)
Battery Type| 31.5V AA battery (Not included)
Camera
Operating Frequency| 2.4GHz
Photo Resolution| HD 19201080
Video Resolution| HD 1280*720
Max Transmission Distance| 164 feet/50m (Outdoors and unobstructed)
Operating Temperature| 32°F to l04°F (0°C to 40°C)
USB Charging Cable
Input| 5V/0.5-2A
Output| 5V/1A
Rated Power| :S \OW
FCC STATEMENT CAUTION
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult Customer Service or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement –Drone
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.