DP AUDIO VIDEO CTP500 Wireless Portable Thermal Printer User Guide

DP AUDIO VIDEO CTP500 Wireless Portable Thermal Printer User Guide

Getting Started

Please read instruction card for proper setup before use.

PLEASE FOLLOW INSTRUCTIONS BELOW TO CORRECTLY LOAD PAPER ROLLS.

1. Look for the instruction tab on the paper roll.
2. Place the paper roll s indicated on label.
3. Carefully close the lid.
   

In the Box

• 1 Thermal Printer

• 3 White Adhesive Rolls 2White Non-Adhesive Rolls

• Quick Start Guide

• USB-C* Charging Cable

• Warranty Card

• Instruction Card
  

Device Overview

Indicator Light

Blinking Green Light:
Device is in pairing mode

Solid Green Light:
Device is connected

Solid Red Light:
Out of paper/Overheated/ Output tray is open

Status Light

Solid Red Light:
Device is charging

Status Light Off:
Fully charged

Load Printer Paper

1. Gently lift up release tabs to open the printer

2. Locate the instruction tab on paper roll and place as shown

3. Pull 1″ inch of the paper roll and place outside of the printer for optimal printing. Close the lid

4. On the “My Printer” page, search for “Core Print” on the available device list and tap to connect

5. Once printing is complete, pull the paper away from you and tear at a 45° angle

Bluetooth®Setup

Fully charge before initial use and make sure to disconnect from other nearby paired devices.

1. Press and hold the button for 3 seconds to power on

2. Download the free app by searching for InstaPrint on the App Store or Google Play

3. Connect to Bluetooth® via the app. In the app, click on the profile tab. Then click on the “My Printer” icon
   My Printer

4. Once on the “My Printer” page, search for “CorePrint” on the available device list and tap to connect

Product Specifications

Battery Capacity: 1200mAh
Printing Type: Inkless Thermal
Print Color: Black
Bluetooth® Version: 5.3
Image Quality: 200 DPI
Charging Input: USB-C®

Important Safety Warning

• Avoid using or storing in the following locations. Damage to the printer may be caused.
  • Do not leave in an exposed area with direct sunlight or near heat-generating equipment.
  • Do not leave in an area where temperature or hurmidity is excessively high or low, or changes radically.
  • Leavened n an area exposed to wateror liquid.
• Avoid dropping or harsh impact to the printer, as damage may be caused.
• Avoid entry of foreign objects or materials, as damage may be caused.
• When cleaning do not use volatile liquid (thinner, benzine, etc.) or wet cloth. Deterioration or discoloration may occur. Use a dry, soft cloth.
• Do not move the printer or place harsh impact on printer while in printing or standby operation. Printer power may disconnect and print data may be lost.
• When charging your device, gently connect or disconnect charging cable to avoid damage.
• Improper charging can result in damaged printing.
• Please mind the paper cutting teeth. This area is sharp and can cause harm if not careful.
• This device contains small parts and is not recommended for kids under 3 years old.
• Adult supervision is recommended for kids under 13 years old. This equipment is not suitable for use in locations where children are likely to be present.
• Disassembly of printer will cause damage and void warranty.
• If severe bulging occurs to battery, please discontinue use.

FCC Caution

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Need Help?

Email us at support@dpaudiovideo.zendesk.com or call us at 1-833-909-CORE (1-833-909-2673). We are available Monday – Friday, 9am-5pm PST, except major holidays.

For information on recycling, please visit
https://www.coreinnovationsinc.com/support

WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov

Download the free app and start printing instantly! Scan this QR Code or visit www.coreinnovationsinc.com/printer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>