Dp Audio Video PKBT300 Wireless Speaker User Guide

June 5, 2024
Dp Audio Video

Dp Audio Video PKBT300 Wireless Speaker

overview

Buttons

  1. Power/Pause &May Button Press and hold to turm the speaker on/off. Press to pause/pkay current song
  2. Volume Down/Previous Button -I44 Press and hold to turn down the vclume. Press to go to previous song
  3. Volume Up/Next Bulton Press and hold to turm up the volume Press to go to next song.
  4. Mode/Answer Buton M/ Press and hold to reject an incoming coll If a coll is coming in. press to answer ond press agan to hang up. Press to switch between Bluetooth /FM Rodio/AUX/Memory Coard modes.

Bluetooth° Setup

  1. Press and hold the Power button )II untl you hear the”Bluetooth Setup” voice prompt.
  2. Enter the Bluetooth settings on your Bluetooth device, and look for “Turn t Up Wireless Speaker. Tap to connect.
  3. A “Bluetooth device is connected’ prompt will play once connection is successful.

Pair Two Packed Party Speakers

Packed Party Wireless Speakers feature TWS (True Wireless Stereo) technology, which allows you to play music on two Packed Party Wireless Speakers simultaneously. creating a suround sound experience.

  1. Make sure both Packed Party Wireess Speakers are tumed on.
  2. Press the Power button Il on both speakers to enter “Bluetooth Setup”.
  3. Connect your Bluetooth device to one of the Packed Party Wireless Speakes.
  4. Press and hold the Mode button MJ on the connected Wireess Speaker. YoU will hear a sound prompt whle the speakers are pairing
  5. The status light wi illuminate on both Wireless Speakers indicating that the two speakers are connected.

FM Radio Mode

  1. Switch to FM radio by pressing the Mode button M/3.
  2. Press the Pause/Play button Dll to scan radio stations automatically.
  3. If you want to search radio stations manually, press the Prev/Next buttons-1 lt

NOTE : You may insert the includoed micro USB cable when in FM mode to improve radio reception.

Hands-Free Calling

  • Previous/Volume- Press once to decrease volume.
  • Mode/Answer Button M/ Press once to answer a call. Press again to hang up. Press and hold to reject a call.
  • Next/Volume+ Press once to increase volume.

Charging the Speaker

Charging Port/ FM Antenna Jack

  1. Plug the included micro USB end of the USB cable into the charging port, and plug the other end of the cable into a wall charger (not included).
  2. Allow approximately four hours to fully charge the battery. Full charge power the speaker for over 10 hours of play time based on a 70% volume level.
    Note: We recommend using a USB wall adapter with a 5v output.

Resetting the Speaker
If your speaker is not operating properly, you may reset it. To do so. press and hold the Power button for approximately 8 seconds until the speaker powers off, and then power it on again as USual.

Need Help?

For customer support regarding your device, please submit a request by emailing at [email protected]. You will be provided a ticket number regarding your inquiry, which you can refer to when contacting us further. You may ako reach a DP AV customer service representative by calling 1-833-909-2673. We are avalable Monday- Friday, 9am- 5pm PST, except major holidays. DP AV strongly urges customers fo email their inquiry prior lo calling, as this will enable us to better assist yoU. Please make sure to note the model number and a description of your inquiry.

Specifications

In The Box

  • Bluetooth Wireless Technology
  • TWS Pairing (pair 2 wireess speakers)
  • SW RMS Power: 10W Peck Power
  • Wireless Speaker
  • Micro USB Coble
  • Quick Start Guide
  • Warranty Card
  • 3.7V/2500rmAh Rechargeable Battery

Designed in Austin. Texas. Mode in China. Al designs 2022 Packed Party. he. 2022 DP Audio Video LIc. All Pights Reserved. UsB is Used lo soey describe the compatibility of our technology and in no ways intended lo infringe on any intellectual property righs of any respective protected marks. 2022Beth SG. Inc. All rights reserved. The ueloothe rodemarksncluding the Bluetooth word maik he figures mark (the runic “B” and aval design), and the combination mark (Bluetooth word mark and design are owned by the Bluetooth SKG. This device complos with port 15 of the FCC Ruos. Operafion is subject to the following two conditions: (1) This device may not cause harmful in interference, and (2) this device must accept any interference recelved, including interference that may couse undesired operation. 1 year warranty from date of purchase, 0 days ony on bbor. Manufactured/imported by D
Audio Video LLC. Distributed by DP Audio Video LlC. Los Angeles, CA 3206 hdustid Terrace, Suite 200, Austin, Texas 78758 Packed Party is a registered trademark of Packed
Party. Ine.
WARNNG: Cancer and Peproductive Harm -wwPiSWemingsuagov ICCD: 2AVRVPKB1300 | EK2202

FCC

This device complies with Part 15 of the FCC Rules. Operation is Subject to the following two conditions: (0) this device may not cause harmful interference, and (2) this device must accept any interference received. including interference that may cause undesired operation.
Caution: Changes or modifications to this product not expressly approved by the party responsible for compliance could void the User’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with Ihe instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or rebate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from fhat to which the receiver is connected.
  • Consul the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction,

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Dp Audio Video User Manuals

Related Manuals