DP AUDIO VIDEO CTP100LG Professional Wireless Thermal Printer User Guide

DP AUDIO VIDEO CTP100LG Professional Wireless Thermal Printer

Download the free app and start printing instantly! Scan this QR Code or visit www.coreinnovationsinc.com/printer

Getting Started

Please read the instruction card for proper setup before use.

PLEASE FOLLOW THE INSTRUCTIONS BELOW TO CORRECTLY LOAD PAPER ROLLS.

1. Look for the instruction tab on the paper roll.
2. Place the paper roll as indicated on the label.
3. Carefully close the lid.

In the Box

Device Overview

Load Printer Paper

• Press the release tabs to open the printer
• Locate the instruction tab on the paper roll and place it as shown
• Pull 1″ inch of the paper roll and place it outside of the printer for optimal printing. Close the lid
• Pull the paper away from you and tear at a 45° angle

Bluetooth® Setup

Fully charge before initial use and make sure to disconnect from other nearby paired devices.

1. Press and hold the power button for 3 seconds to power on
2. Download the free app by searching for InstaPrint on the App Store® or Google Play™
3. Connect to Bluetooth® via the app. In the app, click on the profile tab. Then click on the “My Printer” icon
4. Once on the “My Printer” page, search for “CoreLargePrint” on the available device list and tap to connect

Product Specifications

• Battery Capacity: 2600mAh
• Printing Type: Inkless Thermal
• Print Color: Black
• Bluetooth® Version: 5.2
• Image Quality: 203 DPI
• Charging Input : USB-C®

Windows™/MacOS® Setup

1. Download the Windows™ or MacOS® printer driver at: www.coreinnovationsinc.com/printer
2. Install the downloaded driver and follow the on-screen instructions
3. Connect your printer using the included USB-C® cable (use the USB-C® adapter if needed)
4. Start printing by selecting “CTP100LG” from the printer list when prompted

Important Safety Warning

Avoid using or storing in the following locations. Damage to the printer may be caused. Do not leave in an exposed area with direct sunlight or near heat- generating equipment. Do not leave in an area where temperature or humidity is excessively high or low or changes radically. Do not leave in an area exposed to water or liquid. Avoid dropping or harsh impact on the printer, as damage may be caused. Avoid entry of foreign objects or materials, as damage may be caused. When cleaning do not use volatile liquid (thinner, benzine, etc.) or wet cloth. Deterioration or discolouration may occur. Use a dry, soft cloth. Do not move the printer or place a harsh impact on the printer while in printing or standby operation. Printer power may disconnect and print data may be lost. When charging your device, gently connect or disconnect the charging cable to avoid damage. Improper charging can result in damaged printing. Please mind the paper-cutting teeth. This area is sharp and can cause harm if not careful. This device contains small parts and is not recommended for kids under 3 years old. Adult supervision is recommended for kids under 13 years old. This equipment is not suitable for use in locations where children are likely to be present. Disassembly of the printer will cause damage and void the warranty. If severe bulging occurs to the battery, please discontinue use.

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Need Help?
Email us at support@dpaudiovideo.zendesk.com or call us at 1-833-909-CORE (1-833-909-2673). We are available Monday – Friday, 9 am-5 pm PST, except for major holidays. For information on recycling, please visit
https://www.coreinnovationsinc.com/support 2024 Core Innovations. All rights reserved. Core Innovations is a trademark of DP Audio Video. © 2024 Bluetooth SIG, Inc. All rights reserved. The Bluetooth® trademarks including the BLUETOOTH word mark, the figure mark (the runic “B” and oval design), and the combination mark (Bluetooth word mark and design) are owned by the Bluetooth SIG. These and all third party trademarks are the property of their respective owners. Used with permission. © 2024 Google Inc. All rights reserved. Google, Android and Google Play are trademarks of Google LLC. © 2024 Apple Inc. All rights reserved. Apple and App Store are trademarks of Apple LLC.

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>