Rasonic RIC-SNG28S Kitchen Use Single Burner Induction Cooker User Manual

**

RIC-SNG28S
Kitchen Use Single-Burner Induction Cooker
For household use only**

OPERATION MANUAL

• Read the operation manual carefully before using and well keep it in a safe place for future reference.
• Some figures in this manual may not match with the real object, just for reference only.

Thank you for purchasing Rasonic Kitchen Use Single-Burner Induction Cooker. Read the operation manual carefully before using and well keep it for your future reference.

Important Safeguards

When using the appliance, please follow the basic safety precautions below:
1.1 To prevent fire, burn or electric shocks
Before using the induction cooker

1. Donot connect with other high wattage appliance under the same socket, and make sure the input voltage match the rated voltage marked on the appliance before operation.
2. Do not use power extension cords to avoid overload and risk of fire.

When install the induction cooker

1. For 2800W induction cooker, make sure to connect the power plug of the appliance to a 13A socket. If fixed wiring connection is needed, connection must be incorporating with an individual switch with 13A or above in accordance to the Electricity Ordinance.
2. The appliance should be Placed on a dry area steadily and at least 100 mm away from the wall for ventilation. For built-in installation, leave at least 80 an’ spacing for air intake/ exhaust vent and at least 150 mm between the appliance to the attachment below, Keep dear of the air intake and exhaust vent.

When stir-frying with induction cooker

1. Do not overheat. (Use lower heat levels for preheating.)

• If small amount of oil is used and being heated excessively, oil temperature will rise rapidly and it may scorch to the cookware or catch fire.

  If the bottom of the cookware is thin or curved, it may become red-hot.

  2. Do not leave the appliance unattended.
     CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously.
     WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in a fire.

  3. Never heat an empty cookware alone. Otherwise the appliance may overheat, malfunction and top plate discoloration.

The top plate and top frame become very hot

1. Do not touch the appliance during or after use for a while. {Especially when the hot caution indicator |°: ] lights up.)
2. Clean the appliance after cooled down.
   (Avoid touching the top plate after use for a while because high temperature remained fram heated cookware.)

For the top plate

1. Do not place portable gas bumers, petroleum gas cylinders or canned food on the top plate. They may explode if they are mistakenly heated.
   *** Danger of flre: Do not store items on the cooking surfaces.

2. Use cookware with a flat and clean bottom as mentioned in the manual only, and ensure it is steadily placed onto the top plate. Otherwise, the sensor of the appliance may be matfunction and causes abnormal heating.

3. Metallic objects or magnetic materials such as knives, forks, spoons, lids, aluminum foil/ tray, retort pouch, magnetic ring, watch or accessories should not be placed on or near the surface of the top plate, or in contact with the cookware when the appliance is operating; otherwise, they may get hot. (They may cause burns or injuries by heat generated.)

4. Do not subject the top plate to a crash. (e.g. Dropping heavy object on the appliance may cause invisible cracks under the top plate. Without checked by Shun Hing Electric Service Centre Limited but kept using the appliance may cause further cracks and danger.)

* WARNING! If the top plate is cracked due to subjection to a crash or fallen heavy object, stop using immediately, switch off the appliance and unplug the appliance. In order to avoid the possibility of electric shock, short circuit or fire, contact Shun Hing Electric Service Centre Limited immediately for checking and repairing.
For the cookware
**

1. Specific cookware should be used on induction cooker only. Do not attempt to use it on gas cookers. Never use it alternatively as it may affect the cooking performance.
2. Before placing cookware on the top plate, make sure that there is no water, oil or other attachment in between. If so, clean it before using the appliance.

Avoid deep-frying cooking

1. When deep-frying, overheated oil may catch fire and damage the electrical components because the appliance does not equip with oil temperature control system. Always heat food slowly, and pay attention to heating condition.
2. If oil of fat catches fire, switch off the appliance immediately. Use suitable fire extinguisher or fire blanket. Do not put out the flames with water.

For the IH heaters

1. To avoid hazard occur, do not place the appliance on top of any metallic plates (or metal surfaces). Prevent the metallic materials from getting hot or the appliance endosure may get hot by the temperature increase of the material surfaces.
2. Keep all combustible materials, spray canisters and aerosols away. It may possibly cause fire or explosion.
3. Donot allow people who is unaccustomed to use the appliance without supervision.
4. The appliance is not intended to use by peoples (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction conceming the use of the appliance by the person responsible for their safety.
5. Do not heat any canned food directly to avoid explosion caused by air expansion.
6. Pay attention to the cooking status and temperature to avoid overheating or empty heating. Otherwise, the overheat protection will be activated and the appliance will be shut off automatically when the temperature is too high. It may affect the cooking performance.
7. Great care is necessary in using the appliance, especially near children. Children should be supervised to ensure that they do not play with the appliance. Also, children without adult supervision should not operate the appliance and keep them away from the appliance and its power cord.
8. Keep it out of reach for infants.
9. Do not insert metallic object (such as pins or wire etc.) into the air intake/exhaust vent.
10. The appliance is not intended to be operated by means of an external timer or separate remote-control system.
11. Heat the bottom of the cookware directly. Never place paper or other objects between the cookware and the top plate. (Objects may possibly get burnt due to high temperature.)
12. Always place the cookware at the center of the cooking zone during operation.
13. Do not disassemble, attempt to repair or modify the appliance to avoid accident. For checking or repairing, contact Shun Hing Electric Service Centre Limited.
14. Hf the power cord is damaged, it must be replaced by Shun Hing Electric Service Centre Limited to avoid hazard.

Switch off the main power after use

1. After use, switch off the appliance by pressing [Power] key. After the operation of the cooling fan prolong function, unplug the appliance from the socket. Do not rely on the pan detector to turn off the appliance.
2. When not in use for a long time, shut down and unplug the appliance to avoid damaging the electrical components or even causing fire due to long-term connect to the electricity,
3. Keep the appliance clean, pay attention to pest control, dust and moisture protection. Protect the appliance against cockroaches and other insects from entering the interior of the appliance to avoid short circuit.

1.2 To prevent ignition or accidents
Beware of the following in order to avoid accidents

1. ATTENTION! Ingredients or hot water may spout infrequently during heating. This phenomenon is called bumping. Check the condition carefully and stir the ingredients occasionally by using low power levels, especially when simmering.
2. tf you wear a cardiac pacemaker, consult with doctor for medical advice. (The operation of the appliance may affect the cardiac pacemaker and defibrillator.)
3. Cookware must be placed on the top plate steadily. (If the cookware fell off, it may cause injuries or burns.)
4. Never empty heating or overheating the cookware. (Ingredient may get fire or damage the oonere. It may also damage to the appliance and the top plate, or lead to other hazards, ete,
5. Keep the appliance away from the place of massive hot gas, steam, damp and heat place or water source so as to prevent water penetrating inside the appliance.
6. Donot rinse the appliance, the power cord or the plug with water directly. Do not let it get in touch with water or allow liquid to penetrate the electrical components of the appliance. Do not immerse part or the whole appliance into water when cleaning. Otherwise it may affect the safety performance and cause a risk of electric shock. Make sure the power cord is dry before use.
7. Handle the power cord with care, do not place heavy objects on or clamp it. Any modification is prohibited to the power cord. Do not stretch or twist the power cord. Always hold the plug tightly when unplugging or plugging into the socket.
8. Do not hang the power cord over the edge of table, counter-top or contact with the hot surfaces. Do not use the appliance when the power cord is tangled, it may let the power cord be frayed and damaged.
9. Do not install the appliance above the dishwasher, washing machine, dryer, electric oven or refrigerator. It is because emission of heat could damage other electrical appliances underneath.
10. Make sure to press one function key at a time only. Do not place hot objects or cookware on the control panel as the appliance may function improperty.
11. Do not touch the appliance, plug or unplug the power cord by wet hand.
12. Do not use the appliance for purposes other than cooking. (Using the appliance other than cooking may cause malfunction.)
13. The appliance is intended to be used in household or similar environments such as: staff kitchen area in shops, offices and other working environments; or clients in hotels, motels and other residential type environments.
14. The appliance is for household or similar environment uses only. Do not use it outdoors and any other uses that are not recommended in the manual. If the appliance is used improperly or for commercial (or semi-commercial) purpose or if it s not used according to the instruction in the manual, the maintenance guarantee will become invalid and we refuse any liability for damage caused.
15. To prevent hazards occur, when the appliance or parts were malfunction, do not replace with any parts or accessories which is produced without authorization. Otherwise, the maintenance guarantee will become invalid.
16. In order to comply with safety regulations and to avoid hazards, if the appliance needs to be checked or repaired, contact Shun Hing Electric Service Centre Limited (hotline at 2406 5666 of refer to the address found at the back page of the manual), and be reminded that the official invoice and warranty registration card must be presented for checking or repairing service. 

1.3 When using the induction cooker
The appliance emits magnetic lines of force. Please keep below items away as if affected by magnetism

1. Radios, TVs, hearing aids, etc. (They will be susceptible to noise.)
2. Magnetic card, automatic turnstile tickets, bank cards, etc. (The records may be erased or damaged.)

Do not place the appliance on top of or next to other induction cooking appliances or metallic plates

1. Induction rice cooker or portable induction cooker, etc. (The magnetic field may damage the appliance.)
2. Do not place the appliance on top of any metallic plate during operation. Otherwise, it may damage the appliance, or cause fire and other hazards by heating the metallic plate mistakenly.

Noise generated by cookware when heating
Hf the following situation happens, it may help to alleviate the sound and vibration if the cookware is slightly moved, rotated or replaced:

1. Resonant sounds may be heard depending on the type of cookware.
2. When holding the handle, user may feel a small vibration.
3. if the cookware is moved when heating, a short metallic sound may be heard.

Do not place seasoning or food in the cabinet (located below the appliance)
The heat emission from the exhaust vent may spoil them.
If acidic food sticks on the top plate or top frame, wipe it off immediately
Do not let the residual vinegar, jam or food containing lemon juice or plum sticks on the top plate or top frame. (Otherwise, the top plate or top frame may be discolored or damaged.) Do not rub the top plate against the bottom of cookware The top plate may be scratched or discolored. Do not dog up the intake/exhaust air vent (When the intake/exhaust air vent is clogged, the appliance may turn off automatically and overheat may cause other hazards.)

1. The intake and exhaust air vents can be found at the bottom and the back of the appliance.
2. Do not place the appliance on top of carpet, tabledioth, paper sheet or mat etc. if the intake/ exhaust air vent is dogged, it may cause malfunction.
3. Donot insert metallic object (such as pins or wire etc.) into the appliance, especially intake and exhaust air vents.

Do not use steam cleaner to dean the appliance
If water penetrates to the electrical components inside the appliance, it may cause malfunction electricity leakage or other hazards.
1.4 When using the power level [8]

1. The appliance is with strong heating power. If high power levet is used with small portion of oil, the cookware may be heated excessively. Oil temperature will rise rapidly and may cause accident.

2. tf the bottom of the cookware is thin, overheat may result in cookware deformation.
   Therefore, preheat the cookware with low power level when using thin bottom cookware or small portion of oil.

3. When boiling water, turn down the power level as soon as the water was boiled. (Water may boil over or splash around.)

4. When cooking in [8] power level, do not put ingredients in the cookware. (The heating power fs very strong as the ingredients may boil over.)

Maintenance and Cleaning Methods

1. Switch off the appliance by pressing [| ] key and remove the power plug from the socket before cleaning.
2. Cleaning of the top plate: When the top plate is dirty, use a wrested damp cloth to wipe. If object can not be wiped off, use some mild decontamination powder or detergent to wipe, then using a damp doth to wipe.
3. Cleaning of the main unit When the main unit is dirty, use a soft damp doth to wipe. If the greasiness is hard to wipe off, use some mild decontamination powder or detergent to wipe, then using a damp doth to wipe.
4. Do not use a steam deaner, rinse the appliance and its power cord with water directly or to dip the appliance into water. If water penetrates the electrical parts built into the unit, it may cause malfunction or other hazards.
5. After using a long time, dust and grease may accumulate on the intake/exhaust air vent which may affect cooker’s operation. Clean the appliance regularly and make use of cotton stick.
6. H acidic food (e.g. vinegar, jam or food containing lemon juice or plum, etc.) sticks to the top plate or top frame, wipe it off immediately. Otherwise, the top plate or top frame may be discolored.
7. Materials induding plastic, aluminum foil, sugar, or any foodstuff contains sugar are already burnt on or meited on the cooking zone unintentionally must be removed or cleaned immediately with soft damp doth when the top plate és still warm. Otherwise, it may damage the top plate when cool down.
8. Do not rinse the appliance with water directly or dip the appliance into water. If water enters the electrical components build into the main unit, it may cause malfunction or other hazards.
9. Do not use hard brush or scouring pad to clean the top plate.
10. Do not use any chemicals such as organic solvent or benzene to wipe the top plate/controt panel, so as to avoid chemical reaction.
11. Top plate may suffer from damages such as color changes to yellow, black or scratched due to improper use (e.g. cook with dirty bottom cookware or do not clean immediately after the overflow of soup etc.). User can avoid or reduce such phenomena if user operate the appliance according to the manual and do daily maintenance.
12. Disconnect the power plug when the appliance is not in use for long time. Store in a dry place, and clean it before packing it in a plastic bag. Never wrap the power cord tightly around the appliance or put any pressure on the power cord when the appliance is stored as it could cause the power cord to fray and damage.
13. Pay attention to pest control, dust and moisture protection. Protect the appliance against cockroaches and other insects from entering the interior of the appliance to avoid short circuit.

Cookware Selection

3.1 Suitable Cookware for Induction Cooker (A magnet can be stuck at the bottom of cookware)

1. Material: Cookware is made of iron or magnetic stainless steel. It is necessary to use the cookware stated “Suitable for induction cooking”.
2. Shape: Flat bottom base cookware with the diameter in between 12-20 cm and can contact evenly with the top plate.
3. Weight The maximum weight (including ingredients) must not exceed 6 kg.

3.2 Unsuitable Cookware for Induction cooker (Non-magnetk Cookware — A magnet cannot be stuck to the bottom of cookware)

1. Material: Cookware base is made of non-ferric metal, stainless steel with non-magnetic base (A magnet will not stick to the bottom of cookware), ceramic glass, aluminum and copper.
2. Shape: Uneven base, curved, has protrusions or legs; the bottom of the cookware is round. And the bottom diameter is less than 120 mm or larger than 200 mm. Too light, too thin bottom or base without dear grooves cookware is unsuitable too because it may get scorched, warped or cause movement during heating.
3. Ceramic cookware such as earthen cookware is not suggested to be used, even they are stated ‘Suitable for indiction cooking”. Since it is hard to distinguish whether the cookware is magnetic or not, which may result in malfunction, unstable operation, improper cooking, activation of the safety protection function or even operation errors may occur.
4. Do not use the magnetic plates.

Product Specifications and Configuration

4.1 Product Specifications

4.2 Product Configuration
Front Side

Remark: The above illustrations are for reference only. Size may differ from real object and subject to the actual appliance.

Control Panels and Operation Instructions

5.1 Control Panel

1. Top plate design

Control Panel

(Remarks: Keep the control panel dean and dry. Otherwise, the electronic sensor of the keys will be program fault or malfunction.)
5.2 Power and Temperature Control
’ Note: The power and temperature shown above is the mean value of the actual power and temperature in a desired operation period.
After connecting the power with the appliance, a “Beep’ will emit for a second and all the indicator will flash once, known as standby mode. Long press the [ **] key, the display shows [ ] and keeps flashing, which means the appliance is ready to use. User can press [ + ] or [ ] key to select power or temperature. If no function key is pressed for approx. 1 minute, the display will turn off automatically and the appliance will return to standby mode.
Power control In standby mode, place a suitable cookware at the cooking zone, then press the RI key, power display will show [4] and power level indicator will show the power level correspondingly meaning that the appliance is now operating under default power level 4. User can press the 1-1-1 or [—I key again to adjust a desired power level. There are totally 8 power levels for selection.
Temperature control In standby mode, place a suitable cookware at the cooking zone, [Temperature] function can be activated by pressing the [ ] key, temp. display will show [60°C] meaning that the appliance is now operating under default temperature control 60°C. User can press the [+] or [ — ] key again to adjust a desired temperature level. There are totally 8 temperature levels for selection.
Remark! User can interhange power control and temperature control by pressing ] key during operation.
Remark! If no suitable cookware is placed at the cooking zone, “Beep” sound will keep emitting even power/temperature levels have been set. The power/temperature level indicator will keep flashing to remind user. The appliance will return to standby mode automatically if no suitable cookware placed within 1 minute.
Timer Setting
When using the timer function, after selecting the power/temperature level, press the [ key, timer display will show the default time setting [0:00] and the numbers will flash on display. User can adjust the time by pressing [-1-] or [—] key, circulating from 1 minute to 8 hours. Press the ( key to confirm, or the timer setting will be automatically confirmed after 10 seconds.
When time setting comes to [0:59], display will change to [1:00] if [+] key is pressed once again, meaning that the setting time changed from 59 minutes to 1 hour. To speed up the adjustment, user can press and hold the [+] or [—] key to advance rapidly; changing from 1 minute to 10 minutes by increment or decrement. When approx. 10 seconds elapsed without any modification, the timer setting will be confirmed automatically, the numbers in the display will stop flashing. Remaining time will be shown on the display and will start counting down. When the count down is finished, the operation is finished after a [Beep] sound is emitted and [End] will be shown on the display.
If new setting time is needed, user can press the [ ] key once, numbers on the display will flash again and press the [+] or [—] key to reset the [Timer]. The appliance will confirm automatically 10 seconds after completion of the setting.
‘Timer function can be cancelled by pressing the [ ] key or long pressing [ ] key for 2 seconds, a [Beep] sound will emit afterwards.
Safety Lock
The lock is deactivated in standby mode. Long press the [ ] key for 2 seconds, 3 [Beep] sounds will emit and safety lock indicator [ ] will light up on the display, meaning all function keys are locked. To deactivate the lock, long press the [ ] key again for 2 seconds and a [Beep] sound will emit. The appliance will resume for operation.
To prevent children from accidentally operating the appliance or changing the function modes, long press the NH key for 2 seconds during operation, safety lock indicator H] will light up in the display, all the function keys are locked (including [+], [], [ t] and ] keys) where the operating power control, temperature control and time can not be adjusted. When the safety lock is activated, the safety lock indicator lEi] will light up on the display.
If both [Timer] and [Lock] are activated, display will show the remaining time setting but all the function keys are locked (except [ ] key). Long press the [-0] key for 2 seconds to deactivate the safety lock and all the function keys will be unlocked.
If stop the operation directly by pressing the [ ] key, the safety lock indicator [ ] will still light up until deactivation of the lock. User must long press the [ ] key to unlock before next operation; otherwise, the lock function will remain active. If cut off the power supply directly, the safety lock will be deactivated and all the function keys will be unlocked when re- connecting the electricity again.
Absent-minded shut down protection
When approx. 120 minutes elapsed without pressing any key for operation or setting timer during operation, a [Beep] sound will emit and the appliance will return to standby mode as safety protection. Make use of the timer function if the operation time longer than 120 minutes.
Cooling Fan Prolong Operation
Press the [ ] key to stop operation, the appliance will go to standby mode and the [Power] indicator above will change from lighting to flashing. ATTENTION! The cooling fan will continue to operate in order to suppress the temperature rise in the main unit. The fan will be automatically turned off when the cooling function finished.
Hot Caution Symbol
After finishing the operation, if the temperature of top plate reaches 50°C or above, the hot caution indicator [2 ] will be statically lighted up, meaning that the top plate is still hot, do not touch it.
Error Code
When the appliance malfunction using the appliance improperly, the respective error code will be shown on the display. The operation will stop and generate discrete [ ] sounds if error code E1-E7 are shown on the display. (Refer to the check points and remedy shown on Chapter  Troubleshooting and Treatment)
User can deal with the problem accordingly. If necessary, contact Shun Hing Electric Service Centre Ltd. for checking and repairing.

Troubleshooting and Treatment

During operations, if any error occurred, check the following table before calling for service. Below are common errors and the check point to perform.

After connected to the electricity, no respond when pressing the [Power] key and no indicator on the control panel.| Is the power suspension?| Use the appliance after electricity resumed.
Is the fuse burnt out?| Check the root cause carefully. If the error cannot be fixed, contact Shun Hing Electric Service Centre Ltd. for checking and repairing.
Is the power plug not firmly connected to the socket?
No operation. Buzzer sounds discontinuously.| Is the cookware used incompatible?| Follow the instructions in “Chapter 3. Cookware for induction cooker” to choose suitable cookware.
Is the cookware not placed at the centre of the cooking zone?| Place the cookware at the center of the cooking zone.
Is the cookware being moved during operation?| Place the cookware on the cooking zone when using.
Error code E1/E2| Is the input voltage match with the rated voltage of the appliance?| Make sure the local voltage matches
the rated voltage of the appliance.
Error code E3| Is it heating empty cookware?| Move the cookware apart. Let it cool down together with the top plate before next operation.
Is the ingredients overheated?| Lower the power/temperature level, or switch on the appliance again when it is cooling down.
Error code E4| Is the ambient temperature too high?| Switch off the appliance and restart when it is cooling down.
Is the intake/exhaust air vent clogged or blocked by dirt accumulated?| To ensure good ventilation, remove the dirt clogged in the intake/ exhaust air vent.
Is the ventilation fan malfunction?| Contact Shun Hing Electric Service Centre Ltd. for checking and repairing.
Is it the appliance installed ignoring the instructions stated in installation manual?| Follow the instructions stated in the installation manual, and install the appliance with good ventilation.
Error code E5| Top plate temperature sensor error| Contact Shun Hing Electric Service Centre Ltd. for checking and repairing.
Error code E6| Temperature sensor error| Contact Shun Hing Electric Service Centre Ltd. for checking and repairing.
Error code E7| Is there any water accumulated on the control panel?| Wipe the control panel by soft dry cloth.
Is there any cloth or conductivity objects covering the control panel?| Take the cloth or conductivity objects away from the control panel.

If the above remedies/solutions cannot fix the problem, unplug the appliance immediately. Contact Shun Hing Electric Service Centre Ltd. (Tel: 2406 5666) for inspection and repairing, and report the error code to service centre technician. To avoid the electric shock hazard and damage to the appliance, do not disassemble or repair it by yourself.

Special Avowal

1. The information above has been checked; our company reserves the hermeneutic power to any print errors or misunderstanding on the content.
2. Please note that any technology improvement will be added to the new versions of operation manual without any prior notices. The product appearance and color are subject to the actual appliance.
3. In case there is any inconsistency or conflict between the English versions and Chinese versions of the terms, the Chinese versions shall prevails.
4. _E-copy of user manual can be sent by e-mail on request, please call Shun Hing Electric Works & Engineering Co., Ltd. at 2861 2767.

After Sales Service

For any defect, in the judgment of technician from Shun Hing Electric Service Centre Limited, caused under normal use, our company is responsible for repairing or replacing any parts of the said electrical appliance free of charge within one year guarantee period commencing from the date of purchase. Any defective part which has been replaced shall become our property. Warranty service does not cover the repair or replacement of parts such as top plate, enclosure, power cord, power plug and cookware supplied etc. If the appliance is used improperly, for commercial or semi-commercial use, or not following the instructions in the operation manual, the warranty becomes invalid and our company will refuse any liability and repairing cost for the damage caused.
User must present the official invoice/redemption voucher and the product warranty card with the chop from sales point/redemption center for maintenance. For enquiries, please call Shun Hing Electric Service Centre Limited hotline at 2406 5666.
SHUN HING ELECTRIC WORKS AND ENGINEERING CO., LTD.
> 2861 2767 * 2865 6706

http://Awww.rasonic.com ‘ shew@shunhinggroup.com
Office: 9/F, Peninsula Centre, 67 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong
Tel: 2861 2767 Fax: 2865 6706
Website: http://Awww.rasonic.com E-mail: shew@shunhinggroup.com

Maintenance and Repair Service:
SHUN HING ELECTRIC SERVICE CENTRE LTD.
2406 5666 2408 0316

http://Awww.shesc.convzh
11/F, Shun Hing Centre, 2 Shing Yiu Street, Kwai Chung, N.T. H.K.
Service Hotline: 2406 5666 Fax No.: 2408 0316
Website: http://Avwww.shesc.conven

Customer Service Centres:
1/F, Shun Hing Centre, 2 Shing Yiu Street, Kwai Chung, N.T.
O/F., Block B, Peninsula Centre, 67 Mody Road, Tsim Sha Tsui East, Kowloon
22/F, Parkview Centre, 7 Lau Li Street, Tin Hau, Hong Kong
Avenida de Venceslau de Morais, No. 193-199, 5 andar-1, Edf. Industrial Nam Leng, Macau

http://Awww.shesc.convzh °
For the latest information of Hong Kong and Macau service center, please visit http://Awww.shesc.corven.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>