EAITEMAY P20 Helmet Wireless Earphone Instruction Manual

EAITEMAY P20 Helmet Wireless Earphone

Product Specifications

• Next Song/Volume Up Previous Song/Volume Down control
• RGB Light Effect with multiple color indicators
• Voice assistant integration
• Single channel Intercom and Music Sharing modes
• Speakerphone marker connector for hands-free calling
• Charging indicator and port for easy charging

Product Usage Instructions

Switching On/Off and Wireless Connection
To switch the device on/off, press and hold the On/Off button for 3 seconds. The device announces “Disconnect Wireless” at startup. For a wireless connection, ensure the LED light blinks fast and the wireless mode tone is heard upon successful connection.

Voice Assistant and Lighting
Press the Voice Assistant key for a short press to activate voice assistants. Long press the Mode key to control the RGB light effect modes. Press and hold the Mode key to switch between Single channel Intercom mode and Music Sharing mode.

Single Channel Intercom and Music Sharing
In Single channel Intercom mode, short press the Mode key to switch to this mode and press and hold to speak. For Music Sharing mode, short press the Music Sharing Mode key to switch between transmit and receive modes.

Telephone and Music Functions
To answer a call, perform a short press or press and hold for 2 seconds. End a call by double-clicking the button. For music functions, short press to play or pause music.

Product Overview

Important Reminder:
Before installing the headset, please connect your mobile phone according to the quick manual guide to test the sound effect and volume. If there is a big difference in sound effect and volume after installing into the helmet, please adjust the position of the speaker inside the helmet.

Switch on/off

Default English voice announcement at start-up (Disconnect Wireless)

Wireless connection

Voice assistant/lighting

Pairings

• Connection conditions: the machines need the same model to be paired, an unlimited number of people within the effective distance.
• First connection: after the two machines are switched on, press the mode key to switch to single-channel intercom mode, when one of them needs to speak, press and hold the single-channel intercom key without letting go, it can speak and let go to exit; when the other one needs to speak, the same operation can realize the single channel intercom.

Single channel intercom schematic

Single channel intercom: only one channel can be allowed to enter the speaking state, and the others cannot be in the speaking state

Music Sharing

Telephone function

Double click to switch manual/automatic answer (When Wireless is not connected)

Music function

Matching reset

Introduction to Wireless intercom connection operation (Single channel Intercom and music sharing are turned off by default every time you switch on)

1. Single channel Intercom mode (unlimited number of persons within effective distance)
   After the two machines are switched on, both short press the mode key to switch to the single channel intercom mode, when one of them needs to speak, press and hold the single channel intercom key without letting go, you can speak, let go and exit; when the other one needs to speak, press and hold the single channel intercom key without letting go, you can speak, let go and exit, and so on and so on, and repeat the operation, you can realise the single channel intercom.

2. Restore Factory Settings
   Switch on the computer without connecting Wireless and Single channel Intercom, press and hold the volume down and volume up buttons at the same time for 5S, after the indicator light blinks fast, it restores the factory settings and clears all the pairing information.

3. Music sharing (unlimited number of people within effective distance)
   When both devices are switched on, both short press the mode button to switch into music sharing mode. A mobile phone is connected to the device to play music wirelessly, and the prompt tone “Music Sharing Transmit Mode” or “Music sharing Receive Mode” is played. Start the music sharing pairing: one device needs to be in the music sharing transmitting mode and other devices are in the music sharing receiving mode. After the pairing is successful, the music sharing receiving mode terminal will have a successful connection prompt tone accompanied by the “Music sharing connection success” prompt tone, indicating that the music sharing is successful. Please note that the music sharing transmitting terminal will not have a successful connection prompt tone. If two devices are connected to play music wirelessly, they can only be shared by entering the music sharing transmitter.

4. Telephone priority
   After switching on the machine, the machine is connected to Wireless, no matter which mode the machine is in, when the machine calls or goes to the phone, it will automatically enter the phone mode as a priority, and after hanging up, it will resume the corresponding mode.

Product List

Caveat

1. Please do not put the product into the open fire to avoid explosion;
2. Please do not disassemble the product to avoid damage to the electronic devices;
3. Please do not close to sharp objects to cause damage to the product;
4. Long time no use, please place in a dry place；
5. Before using the Wireless device, please fully charge it;
6. If the red light does not come on when charging, it may be the voltage is too low；
7. To extend the life of the built-in polymer battery, please charge the device at least once a month.

Instruction warning

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference wil not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions.

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

FAQ

1. How do I pair two devices for Single channel Intercom or Music Sharing?
To pair two devices, ensure they are of the same model. Press the Mode key to switch to the desired mode and follow the instructions for Single channel Intercom or Music Sharing as mentioned in the manual.

2. What should I do if there is a difference in sound quality after installation?
If there is a difference in sound quality after installation, adjust the position of the speaker inside the helmet as recommended in the manual.

3. How do I know if the wireless connection is successful?
A successful wireless connection is indicated by a slow flashing LED light on the device. Ensure you hear the wireless mode tone to confirm the connection.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>