KOHLER 26365T Round Connection Instruction Manual
- June 3, 2024
- Kohler
Table of Contents
KOHLER 26365T Round Connection
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co. reserves the right to make changes in product characteristics, packaging, or availability at any time without notice. Please leave these instructions for the consumer. They contain important information.
NOTES:
- An in line water filter must be used with this product.
- All installations should comply with the relevant requirements of AS/NZS 3500.
ROUGH-IN DIMENSIONS
INSTALLATION
To perform installation, installer must provide G1/2″ nipple(1) to the pipe so it extends 9~13mm beyond the finished wall. Apply tape or thread sealant to the nipple threads. And install the connector kit(2). Adjust the position and make sure the thread outlet(3) faces down. Flush both water supplies through the connector for about one minute to remove debris.
CLEANING INSTRUCTIONS
All finishes: Clean the finish with mild soap and warm water. Wipe entire
surface completely dry with clean soft cloth. Many cleaners may contain
chemicals, such as ammonia, chlorine, toilet cleaner etc. which could
adversely affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>