Rasonic RLF-30KM Living Fan User Manual

Rasonic RLF-30KM Living Fan

Product Information

• The LIVING FAN RLF-30KM is designed for household use only.
• The product comes with a manual that should be read before using the fan.
• The fan has multiple parts including a control panel, remote controller, and battery case.
• The product has safety precautions that should be followed to avoid injury or damage to the product.
• The product can be used by children aged 8 years and above and persons with disabilities or limited physical, sensory or mental capabilities.
• The fan has a power cord of 220V-240V~ 50-60Hz.
• The product dimensions are 350 x 300 x 827 and weight is 4.05kg.

Product Usage Instructions

Battery Replacement

• Pull out the battery case from the back of remote controller, press tab toward to right and pull out the battery holder.
• Replace the coin lithium battery into the battery holder, keep the positive pole upwards (3V CR2032).
• After inserting the battery, slide the battery box, then insert and fix the battery box.

WARNING: Keep the lithium battery out of reach of small children.

Cleaning and Maintenance

• Always unplug the unit before cleaning, maintenance or moving. To avoid danger, unplug the unit and wait until the fan stop running before cleaning.
• Ensure that the fan is switched off from the supply mains and unplug before removing the guard.
• Clean the surface of fan with a soft damp cloth.
• After cleaning, please dried up the fan before use.

Installation

Joint the tube to the base

1. Remove the screw from the base of tube by screw driver.

2. Align the hole of column with column of the tube, then install the tube to the base.

3. To lock the screw by screwdriver.

Joint the main body to the tube

1. Align the axis of main body with the axis hole of tube.
2. Inserted the main body vertically into the tube until hear “click”sound.

Install back guard

1. Uninstall fan blade cap and back guard set nut.

2. Align the groove and hole of back cover with the column on the motor.

3. Tighten the guard set nut in a clockwise direction.

Install fan blade

1. Align the groove of fan blade with motor axis connect position, then install it on the motor.
2. Tighten the fan blade screw cap in anticlockwise direction.

Install front guard

1. Remove the screw under the front guard by screwdriver, pull the front guard net buckle and remove the front guard.

2. Align the hook of front guard with install position of back guard.

3. Close the underside net buckle of front guard to fix the cover, use screwdriver to lock the screw.

Additional Advices

1. While installing the unit, make sure fan blade is inserted completely. If not, the fan blade could not rotate and the unit could not work properly.
2. Do not immerse the power cord, plug and the whole unit into water or rinse under the tap. The internal components are not allowed to get wet.
3. Do not use metal brush, gasoline, isopropanol, vinegar, poisonous or corrosive detergent to clean the unit to avoid damage of the appliance. Use a damp cloth to clean the surface of fan.
4. When store, never wrap the power cord tightly around the appliance or put any pressure to the power cord so as to avoid power cord damage.
5. It is recommended to clean the fan every month.
6. If the fan will not be used for a long time, store it in the cool, dry and safety place.

Safety Precautions

• Be sure to read the following safety precautions, in order to avoid possible injury to yourself or others and damage to your belongings.
• The user must use qualified socket with safety certification, or it may cause fire.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. Do not allow children to climb on the fan.
• Only use the fan with the original adapter. Make sure that the adapter and main body are well connected before use, otherwise it will cause the appliance overheat or damage due to contact failure.
• Hold the main plug when disconnect from the power supply, never pull the supply cord.
• Make sure main plug is fully inserted into socket. Loose engagement of main plug and socket may cause electric shock or fire due to overheating of the main plug.
• Wipe off dust on the main plug and socket periodically. Accumulation of dust on main plug may cause poor insulation and may result in fire.
• Do not use the fan when the power cord or main plug is damaged. If the supply cord is damaged, it must be replaced by the Shun Hing Electric Service Centre Limited in order to avoid the hazard. If the power cord is damaged or the fan is malfunction, please take the fan to Shun Hing Electric Service Centre Limited for repairing. Do not disassemble, repair or replace with parts and accessories without authorities.
• Do not pinch, bend, or twist the power cord excessively. The core conductors may be exposed or broken which may cause electric shock, short circuit, fire and product damage.
• Do not contact with water. It may cause electric leakage, short circuit, product damage and fire.
• Do not cover the fan in order to avoid overheating.
• Please do not put any object on the fan body.
• Never touch the fan and power plug with wet hands to avoid electric shock.
• Do not insert fingers or conductive object into the front and back air outlets of the machine to avoid the risk of electric shock, human injury, fire or damage of appliance.
• Avoid any concussions or shocks to the fan.
• Do not use or place the fan in the sunshine.
• Put the power cord correctly in case trip over by it.
• Put the fan on the flat and stable ground when using the fan.
• Do not use the fan under the following situation: Near gaseous fuel cooker/ Place with full of inflammable gas/ Place exposed to rain or water drop/ Near insecticide/ Oil corrosive solvent/ High temperature/ High humidity/ Near chemical, oil and dust area
• Please do not let the rain drop or hang wet clothes over the machine so as to avoid current leakage and electric shock; Please do not put flammable materials and wet clothes covered on the air outlet so as to avoid risk of fire or electric shock.
• Please do not spray insecticide, solvent or flammable liquid to the fan as it may cause damage to the fan.
• Please shut down the machine before the user leave the machine so as to avoid accidents.
• Avoid continuously exposure of direct wind from the fan especially to infant and children.
• The power must be cut off and unplugged before cleaning or maintenance. Ensure that the fan is switched off from the supply main before removing guard/ cover.
• Please clean the machine by using a damp cloth (or a damp cloth with some mild detergent), do not use corrosive detergent or solvent and such similar cleaning products, do not pour water into the machine.
• Please do not put the air intake and outlet of the fan close to the wall or curtain, otherwise the air flow will be blocked and affect the fan performance.
• If it occurs problems of abnormal sound or uneven wind speed after using for some times, perhaps there is too much dust in the air intake grid and make the air flow blocked, the fan could get right by cleaning the fan with a plastic brush.
• Cut off the power if the unit is not used for a long period of time. Pull out the plug, pack the fan well to protect it away from dust and keep it in the dry, well-ventilated and clean place.

Part Name

Control Panel

Remote Controller

How To Disassemble

1. Remove the screw under the front guard by screwdriver.
2. Pull the net buckle, and then remove the front guard.

Instruction

Place the fan on a stable flat surface. Connect the supplied adapter terminal to the fan first, then insert the adapter power plug into a 220V-240V~50-60Hz electrical power supply outlet. Press the buttons on control panel or remote control to select function. Adjust the wind direction
Hold the fan up or down to adjust the wind direction.

SPECIFICATION

SPECIAL AVOWAL

1. The information above has been checked. Our company reserves the hermeneutic power to any printing errors or misunderstanding on the content.
2. If there are technical improvements on the appliance, the operation manual will be updated without any prior notice. The product appearance and color are subject to the actual appliance.
3. The e-copy of user manual can be sent by e-mail on requested, please call Shun Hing Electric Works & Engineering Co. Ltd. hotline at 2861 2767.

AFTER SALES SERVICES

For any defect, in the judgment of technician from Shun Hing Electric Service Centre Limited, caused under normal use, we are responsible for repairing or replacing parts of the said electrical appliance free of charge within one year guarantee period commencing from the date of purchase. Any defective part which has been replaced shall become our property. Guarantee service does not cover the repair or replacement of accessories, external cables or cabinet, etc. Additional charges shall be levied if services are required. Please present the official invoice and the guarantee certificate with the sales point‘s chop or the redemption center‘s chop for free maintenance. For enquiries, please call Shun Hing Electric Service Centre Limited hotline at 2406 5666.
Free guarantee service will not be provided to the fan if:

1. it has been explicitly or implicitly modified, tampered with, altered or repaired in any way by persons other than technicians of the Company.
2. it has been damaged through misuse, negligence, liquid ingress or corrosion, power interruption, natural calamities or accident or external factors.
3. it is not a fixed installation on land.
4. the normal operation of the fan is affected by improper installation.
5. the domestic model of fan is used for industrial or commercial purpose.
6. the change of location or ownership of the fan and did not inform Shun Hing Electric Service Centre Limited.

References

• 信興電工工程有限公司
• Shun Hing Electric Service Centre Ltd

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>