ANKER A17A2 EverFrost Powered Cooler 50 User Manual

A17A2 EverFrost Powered Cooler 50
User Manual Live Charged.
Anker EverFrost Powered Cooler 50
USER MANUAL

Attention
Not permitted on aircraft.

Important Safety Instructions

To reduce the risk of injury, users must read the instruction manual.
WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
If the power cord is damaged, it must be replaced by the manufacturer, service agent, or similarly qualified persons in order to avoid a hazard.
The appliance is only to be used with the power supply unit provided with the appliance.
Disconnect the power supply before cleaning and maintenance.
Instructions for appliances incorporating batteries that are intended to be replaced by the user shall include the following:

• Battery type: Rechargeable lithium-ion battery (A17B0)
• Disposal of a battery into a fire or hot oven, or mechanically crushing or cutting off a battery, can result in an explosion.
• CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Do not use nonrechargeable batteries!
• A battery subjected to extremely low air pressure may cause an explosion or leakage of flammable liquid or gas. Under abusive conditions, liquid may be ejected from the battery— avoid contact. If contact accidentally occurs, rinse with water. If liquid gets in your eyes, seek medical help as it may cause irritation or burns.
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the main power supply when removing the battery.
• Do not dispose of the battery in heat or fire. The battery is to be disposed of safely.
• When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.

WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.
When connecting to the DC power supply, the appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance.
Detachable Supply Unit GM95-145600-D

• Suitable for camping.
• The appliance shall not be exposed to rain.

Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
WARNING: When positioning the appliance, ensure the power cord is not trapped or damaged.
WARNING: Do not place multiple portable socket outlets or portable power supplies at the rear of the appliance.
A child entrapment warning statement shall be included in either the operating instructions or in a use and care manual provided with each refrigerator and shall include the following or equivalent wording:
WARNING: Risk of child entrapment.
Before you throw away your old refrigerator or freezer:

• Remove the doors.
• Leave the shelves in place so children cannot easily climb inside.

Prevent unintentional starting. Ensure the switch is off before connecting to the battery pack, picking it up, or carrying the appliance. Carrying the appliance with your finger on the switch or powering the appliance with the switch on may lead to accidents.
Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing the appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.
Recharge only with the charger specified by the manufacturer. A charger suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can connect one terminal to another. Burn hazards or fire may occur if the terminals are shorted together.
Under abusive conditions, liquid may be ejected from the battery—avoid contact. If contact accidentally occurs, rinse with water. If liquid gets in your eyes, seek medical help.
Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or appliance that is damaged or modified as they may exhibit unpredictable behavior resulting in fire explosion or risk of injury.
Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 266°F (130°C) may cause an explosion.
Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
Have servicing performed by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the product is maintained.
Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.
The battery pack must be used with the Anker adapter (GM95-145600-D) for charging.
Do not expose the charger to rain, moisture, or snow.
To reduce the risk of damage to the cigarette lighter plug and cord, pull by plug rather than the cord when disconnecting the charger.
Make sure the cord is placed well so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
Do not operate the charger with a damaged cord or cigarette lighter plug—replace it immediately.
Do not operate the charger if it has received a sharp blow, dropped, or otherwise damaged in any way.
Do not disassemble the charger. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
To reduce the risk of electric shock, unplug the charger before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
Please be warned that the unit must be properly assembled in accordance with the assembly instructions before it is used.
**** This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1-800-988-7973
RF Exposure Compliance Statement
This equipment complies with the FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.03ft (20cm) between the radiator and your body.
IC Statement
This device complies with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device is in compliance with RF field strength limits, and users can obtain information on RF exposure and compliance.
This Class B digital apparatus complies with the Canadian ICES-003.
CAN ICES-003 (B)/NMB-003(B)

Bluetooth:
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.
Manufacturer:
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
This refrigerating appliance is not intended to be used as a built-in appliance.

What’s in the Box

Overview

1. Cooler Cover
2. LCD Screen
3. Handle
4. Battery Cover
5. Wheels
6. Screwdriver
7. Tray Table

Prop up the tray and set up the kickstand underneath the cooler.

LCD Screen

1. Zone 1 Temperature
2. Zone 2 Temperature
3. Temperature Unit
4. Voltage Protection Level
5. Bluetooth
6. Remaining Battery in Percentage (if using battery to power)

Powering Your Cooler
We do not recommend using multiple charging methods at the same time.

Without the Battery

AC Power
Power the cooler by connecting to a wall outlet with the AC charging cable. Power via Car
Connect the cooler to a car’s output port with the car charging cable.

With the Battery

AC Power
Power the cooler by connecting to a wall outlet with the AC charging cable. Power via Car
Connect the cooler to a car’s output port with the car charging cable. Recharging via Solar Panel
Power the cooler by connecting the battery to a solar panel with an XT-60 to XT-60 cable. USB-C Recharging
Power the cooler by connecting the battery to a wall outlet with the USB-C cable. Using Your Cooler

1. Press the power button for two seconds to turn on your cooler. The LCD screen will light up.

2. Push the cover up to open the cooler.

3. Press the power button once to light up the LCD screen.

4. Turn off the left/right area separately.
   Press the “Up” button first, and then press the “On/Off” button at the same time to turn off/start the left area. Press the “Down” button first, and then press the “On/Off” button at the same time to turn off/start the right area.

Installing the Battery

Press the snap-fits to remove the battery cover. Place the battery inside and you will hear a click when the installation is successful. Then, place the battery cover back.
The battery cover will automatically open when lifted up.

Setting the Temperature

To enter the temperature adjustment mode, press the settings button until the temperature number flashes.
Press the up or down buttons to adjust the zone temperature, and confirm your temperature by pressing the settings button again.

Setting the Temperature Unit

To enter the temperature adjustment mode, press the settings button until the temperature unit icon flashes.
Press the up or down buttons to choose between “Celsius/Fahrenheit,” and confirm the unit by pressing the settings button again. Bluetooth
Press the settings button for 2 seconds to turn on Bluetooth. The Bluetooth icon on the screen will flash.
It will automatically connect to your phone with Bluetooth on, and the icon will turn steady white. The Bluetooth function will be turned off after 12 hours without any connection.

Car Battery Protection Grades

To enter the voltage level adjustment mode, press the settings button until the voltage level icon flashes. Press the up or down buttons to choose between “L/M/H”, and confirm it by pressing the settings button again.
Select “M/H” gear when the product is powered via a car. It’s recommended to select “L” gear when powered by an independent power supply. | 12 V| 24 V
---|---|---
Operating voltage| Start-up voltage| Operating voltage| Start-up voltage
High| 12 V| 12.5 V| 24.7 V| 26.1 V
Medium| 11.4 V| 12.2 V| 24.3 V| 25.3 V
Low| 10.4 V| 11.3 V| 21.9 V| 22.9 V

When the car’s battery voltage is lower than the set value without the battery, your cooler will stop working.
When the car’s battery voltage is lower than the set value, the cooler switches to its own battery for power supply. Once the car battery is restored, it switches to the car battery’s power source.

The Anker App for Smart Control

You can remotely control your powered cooler using the Anker app. Please download the app and its user manual by scanning this QR code.
Connect the device to a network before using the app for the first time. After connecting successfully, you can connect your devices off- grid.https://www.ankerjapan.com/products/a17A0

Specifications

Troubleshooting

• Reminder to Close Doors: The buzzer will send a reminder if the cooler’s cover is not closed for more than 180 seconds.
• The cooler will stop working if the tilt angle exceeds 30 degrees. Place it horizontally, and it will resume normal operation in 5 minutes.

FAQ

Q1: How long does the cooler’s battery last when fully charged?****

– The battery capacity of the cooler is 299.52Wh. When the cooler’s temperature is at 25°C (77°F) ambient temperature, it will run for 27 hours with 4°C (39.2°F) storage temperature.

Q2: What ambient temperature can the cooler be used normally?****

– The recommended ambient temperature is 32°F – 104°F (0 – 40°C).

Q3: What should I do when using a solar charger to charge Anker EverFrost Powered Cooler?****

– The solar input supports an 11-30V solar charger with an XT-60 connector. We recommend using Anker 100W Solar Panel to get the best compatibility.

Anker EverFrost Powered Cooler Warranty Policy
This Anker EverFrost Powered Cooler purchased on AnkerDirect and Anker authorized resellers to come with a limited warranty (“warranty”) as set out below. By using an Anker EverFrost Powered Cooler, you agree to be bound by the terms of the Anker limited warranty.
2-year limited warranty for Anker EverFrost Powered Cooler and 3-year limited warranty for the compressor for purchases made on AnkerDirect and Anker authorized resellers. The warranty period starts from the date of purchase.
Anker’s limited warranty is restricted to the country of purchase. The limited warranty is void on items taken outside the country they were originally bought in or shipped to directly from an authorized online purchase.
Exclusions and Limitations
Not covered under warranty:

• Products that are damaged or modified.
• Products operated with a damaged cord, plug, or output cable.
• Products that are disassembled.
• Products that are cleaned with harmful chemicals or detergents.
• Non-quality related issues (after 30 days of purchase).
• Products purchased from unauthorized resellers.
• Products without sufficient proof of purchase.
• Products that have been refunded.
• Products with an expired warranty.
• Lost, stolen, or free products.
• Damage from outside sources.
• Repairs through 3rd parties.
• Damage from misuse of products (including, but not limited to falls, use of the product in excess of its output rating, exposure of the product to rain or snow, extremely low air pressure, extreme temperatures).
• Purchases from illegitimate sources.
• Batteries that are damaged when not used for a long time or not properly maintained according to the user manual.

Anker is Not Liable For:

• Loss of data incurred from the use of Anker products.
• Returning personal items sent to Anker.

When returning items with a prepaid shipping label provided by Anker, Anker takes responsibility for any damage or loss incurred in transit. When returning items for non-quality issues, the buyer assumes responsibility for any damage or loss incurred in transit. Anker does not provide refunds for items damaged in transit due to non-quality related warranty claims.
For warranty claims, you can send an email to:
US/CA/UK/DE/JP market: support@anker.com
MEA market: support.mea@anker.com
CN market: CED-CN@anker.com
Or you can call us at:
US/CA: +1 (800) 988 7973
UK: +44(0)1604 936 200
DE: +49(0)69 9579 7960
JP: +81 03 4455 7823
UAE: +971 8000 320 817
KSA: +966 8008 500 030
Kuwait: +965 2206 9086
Egypt: +20 8000 000 826
AU: +61 3 8331 4800
TR: +90(850)460 1414
RU: +8(800)511 8623
CN: +86 400 0550 036
KR: +82 02-1661-9246
IN: +91 1800 3138 831
Middle East & Africa: +971 520750842
This page is attached to the Anker warranty page, and Anker reserves the right of final interpretation of the content.

Register Your Anker PowerHouse Today

Why Register?
1. Hassle-Free Warranty: Confirm the 2-year limited warranty for your Anker EverFrost Powered Cooler and 3-year limited warranty for the compressor.
2. Fast Customer Service: Enjoy exclusive customer service and get what you need quickly.
3. Receive the Latest News: Get exclusive first looks at new products and instant updates on official events.https://rainbowbridge.anker.com/qrscan?key=anker-221202
• Scan the QR code below to enter the smart self-service page for more information about your Anker EverFrost.
https://rainbowbridge.anker.com/qrscan?key=ankerpower-warranty

Customer Service

2-Year Limited Warranty*

• Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
  Lifetime technical support
  support@anker.com
  support.mea@anker.com (For Middle East and Africa Only)

(US/CA) +1 (800)988 7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
(Middle East & Africa) +971 520750842
(UAE) +971 8000320817
(KSA) +966 8008500030
(Kuwait) +965 22069086| (Egypt) +20 8000000826
(AU) +61 3 8331 4800
(TR) +90 0850 460 14 14
(RU) +8 (800) 511-86-23
（日本）03 4455 7823
（한국）+82 02-1
(India) +91 18003138831
---|---

For tutorial videos, FAQs, manuals, and more information, please visit: https://support.anker.com
Or scan the QR code below:https://rainbowbridge.anker.com/qrscan?key=anker-221202

| @anker_offcial
@anker_jp
---|---
| @AnkerDeutschland
@AnkerJapan
@Anker
| @AnkerOffcial
@Anker_JP

PPA 22
Paccolta Carta
Product Number: A17A2
51005003904V01

Documents / Resources

| ANKER A17A2 EverFrost Powered Cooler 50 [pdf] User Manual
A17A2 EverFrost Powered Cooler 50, A17A2, EverFrost Powered Cooler 50, Powered Cooler 50, Cooler 50
---|---

References

• Anker Support
• 一般財団法人 家電製品協会

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>