PARKSIDE PLSA 20-Li A1 Cordless LED Worklight Instruction Manual

: June 9, 2024
: PARKSIDE

PLSA 20-Li A1 Cordless LED Worklight

Cordless LED Worklight

PLSA 20-Li A1

Cordless LED Worklight
Translation of the original instructions

IAN 497678_2204

Before reading, unfold the page containing the illustrations and familiarize yourself with all functions of the device.

parts light

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product. During production,
this equipment has been checked for quality
and subjected to a final inspection. The
functionality of your equipment is therefore
guaranteed.

The operating instructions constitute
part of this product. They contain important
information on safety, use and disposal.
Before using the product, familiarize
yourself with all of the operating and safety
instructions. Use the product only as described
and for the applications specified.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.

Intended purpose
The battery-powered LED flood lamp is
suitable for use in workshops, garages or
the home.
The battery-powered LED spotlight is used
for mobile, spatial and time-limited illumination
of indoor areas.
The device is only intended for indoor use.
This device is not suitable for commercial
use. The warranty is void in the case of
commercial use.
The device is part of the X 12 V TEAM and
X 20 V TEAM series and can be operated
using X 12 V TEAM or X 20 V TEAM series
batteries. The batteries may only be charged
using chargers from the X 12 V TEAM
or X 20 V TEAM series.

General description

The illustrations can be found
on the fold-out pages.

Technical data

Cordless LED Worklight ……..PLSA 20-Li A1
Nominal voltage
U1 ………………………………….. 20 V
U2 ………………………………….. 12 V
Operation with power adapter
U3 …………………………. 18 V ; 1.5 A
Number of lamps (LED) ………….20 x 1 W
Light output……………………max. 2300 lm
Light colour ………… Daylight white 5700K
Energy efficiency class …………………….. F
Lighting duration in battery operation:
20 V/2 Ah …………………………. 85 min
20 V/4 Ah ……………………….. 170 min
12 V/2 Ah …………………………. 50 min
12 V/4 Ah ……………………….. 100 min
Internal thread ……………….. 1/4“ and 5/8“
Protection class …………………………. III III
Protection category…………………….. IP20
Weight …………………………. appr. 1.1 kg
Dimensions
Length ……………………………..250 mm
Width ………………………………189 mm
Height ……………………………..210 mm
Max. projected area……….. 99 x 151 mm
Charger (power adapter) JLH341801500G
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
DE-63762 Großostheim
HRA: 5468, Amtsgericht Aschaffenburg
Input voltage ………………….100-240 V ~;
Input A C f requency …………… .50-60 Hz
Power input ……………………………..50 W
Rated output ……………………… 18.0 V
Output current ………………………….1.5 A
Output power ………………………..27.0 W
Average active efficiency …………..89,5 %
Efficiency at low load (10%) ……….80,9 %
Power consumption at zero load …0.09 W
Protection class …………………………… II

Protection category…………………….. IP20
Temperature ………………………max. 90°C
Mains connection only for LED devices

Extent of the delivery

Carefully unpack the appliance and check
that it is complete.
– Cordless LED Worklight
– Instruction Manual
– 12V adapter
– Power plug
Battery and charger
are not included.
Dispose of the packaging material correctly.

Functional description

The cordless LED work light has a swiveling
head and there are several options for placing
or hanging it.
The device can also be operated without
battery using the charger/power adapter.
Refer to the following descriptions for a
functional description of the controls.

Overview

1 Switch
2 On/Off switch
3 Handle
4 Adjusting screw
5 Hook
6 Recess
7 Latch
8 12 V adapter
9 Power plug
10 Plug
11 Release buttons
12 Battery
13 Power connection
14 Guide
15 Keyhole bore
16 Internal thread

Charging times

The device is part of the X 20 V TEAM
series and can be operated using X 20 V
TEAM series batteries.
Batteries of the X 20 V TEAM series may
only be charged using chargers of the
X 20 V TEAM series.
With the enclosed 12 V adapter, series
X 12 V TEAM batteries may also be used.

We recommend that you operate this appliance
with the following 20 V batteries only:
PAP 20 A1, PAP 20 A3, PAP 20 B1,
PAP 20 B3, Smart PAPS 204 A1,
Smart PAPS 208 A1.
We recommend charging these batteries
with the following chargers: PLG 20 A1,
PLG 20 A3, PLG 20 A4, PLG 20 C1,
PDSLG 20 A1, Smart PLGS 2012 A1.

We recommend that you operate this appliance
with the following 12 V batteries only:
PAPK 12 A2, PAPK 12 B2.
We recommend charging these batteries
with the following chargers:
PLGK 12 A2.

Charging times (min.)

|

PAP 20 A1 PAP 20 B1

|

PAP 20 A2

|

PAP 20 A3

PAP 20 B3

Smart

PAPS 204 A1

|

Smart PAPS 208 A1

---|---|---|---|---

PLG 20 A1

PLG 20 A4

PLG 20 C1

|

60

|

90

|

120

|

210

PLG 20 A2

|

45

|

60

|

80

|

165

PLG 20 A3

PLG 20 C3

|

35

|

45

|

60

|

120

PDSLG 20 A1

|

35

|

45

|

60

|

120

Smart

PLGS 2012 A1

|

35

|

40

|

40

|

50

Charging times (min.)

|

PAPK 12 A1 PAPK 12 A3

|

PAPK 12 A2

|

PAPK 12 B1 PAPK 12 B2 PAPK 12 B3

|

PAPK 12 D1

---|---|---|---|---

PLGK 12 A1

|

60

|

60

|

120

|

150

PLGK 12 A2

|

60

|

60

|

120

|

150

PLGK 12 B2

|

30

|

45

|

60

|

80

PDSLG 12 A1 PDSLG 12 A2

|

60

|

45

|

60

|

80

Safety instructions

Symbols and icons
Symbols on the appliance

On/Off switch
Level 1
Level 2
Flashing mode
Changing the illumination
mode
Warning! Do not look
into the light source!
The device is suitable for
indoor use only.
Polarity
Electrical appliances must not
be disposed of with the domestic
waste.
III Protection class III
Direct voltage
Symbols on the power
adapter
Read the instruction manual.
The charger is only suitable
for use indoors.
Short-circuit proof safety
transformer
Independent transformer

Protection class II

Electrical appliances must not

be disposed of with the domestic

waste.

Polarity

Symbols on the packaging

max.

2300 lm

Light output:

max. 2300 lumens

, 1.5 m cable length

5700 K

Colour temperature: Daylight

white 5700 kelvin

Disposal symbol for corrugated

cardboard

Please dispose of waste in an

environmentally friendly manner

in the waste containers

provided

Symbols in the manual

Warning symbols with information

on damage and injury

prevention.

Hazard symbol with information

on the prevention of personal

injury caused by electric

shock.

Instruction symbols with information

on preventing damage

Help symbols with information

on improving tool handling.

Safety notices for battery powered

lamps

• Do not cover the battery-powered
LED flood lamp when in use.
The battery-powered LED flood
lamp becomes hot during use
and can cause burns.
• Do not look into the light beam.
Do not aim the light beam at
people or animals.
• Do not allow children to use the
battery-powered LED flood lamp.
They could inadvertently blind
other people or themselves.
• Lamp not for children under 14
years of age!
• Check that the battery-powered
LED flood lamp holder is stable.
There is a risk of injury if the
battery-powered LED flood lamp
falls down.
• The light sources can only be
replaced by the manufacturer without
permanently damaging the
surrounding product.
• The operating device (power
adapter) can be replaced by the
end user with an original spare
part, which is available in our
online shop under the article
number 80001284.

Use and treatment of this

battery-powered tool

• Only recharge the battery using
chargers recommended by the
manufacturer. If a charger that
has been designed for a particular
type of battery is used to
charge other batteries, there is a
risk of fire.

• Only use the battery that is intended
in an electric tool. The
use of other batteries may create
a fire hazard and lead to injury.
• When not in use, keep batteries
away from paper clips, coins,
keys, nails, screws or other small
metal objects that could cause
the contacts to be bridged. A
short circuit between battery
contacts can result in burns or a
fire.
• When misused, fluid may leak
from the battery. Avoid any
contact with it. On accidental
contact, wash in running water.
If the fluid comes into contact
with the eyes, seek medical assistance
also. Leaking battery
fluid can cause skin irritation or
burns.

Service

• Have your power tool serviced
by a qualified repair person
using only identical replacement
parts. This will ensure that
the safety of the power tool is
maintained.

Special safety directions for

battery-operated tools

• Ensure that the device is switched
off before inserting the
battery. Inserting a battery into
a power tool that is switched on
may result in accidents.
• Recharge the batteries indoors
only because the battery charger
is designed for indoor use only.
• To reduce the electric shock hazard,
unplug the battery charger

from the mains before cleaning
the charger.
• Do not subject the battery to
strong sunlight over long periods
and do not leave it on a heater.
Heat damages the battery and
there is a risk of explosion.
• Allow a hot battery to cool before
charging.
• Do not open up the battery and
avoid mechanical damage to
the battery. Risk of short circuit
and fumes may be emitted that
irritate the respiratory tract. Ensure
fresh air and seek medical
assistance.
• Do not use non-rechargeable
batteries!
• Do not use any accessories that
are not recommended by PARKSIDE.
This can result in electric
shock or fire.

Observe the safety information
and notes on charging
and proper use as shown in
the instruction manual for your
battery and charger from the
X 20 V TEAM or X 12 V TEAM series.
A detailed description of the charging
process and further information
can be found in the separate
operating instructions.

Operation

The device can either be connected to the
mains power supply or optionally be operated
with X 20 V Team or X 12 V Team
batteries.

Connecting the mains

power suppl

Only operate the light with
mains power with the enclosed
power adapter
JLH341801500G.
Only use indoors.
1. Plug the power adapter (9) into the socket.
2. Insert the plug (10) into the power
connection (13) on the device.

Removing/inserting the 20 V battery

1. To insert the battery (12), push the battery
along the guide on the back of the
device. You will hear it click into place.
2. To remove the battery (12) from the device,
press the release buttons (11) on
the battery and pull the battery out.

Removing/inserting the 12 V battery

To operate the device with 12 V batteries,
first you will have to insert the 12 V adapter.

Inserting the 12 V adapter
1. Remove the 12 V adapter (8) from
the side of the device as necessary by
pushing the latch (7) on the bottom of
the 12 V adapter away from the device
and pulling up on the 12 V adapter.

Inserting the 12 V battery
1. Slide the battery (12) into the 12 V
adapter (8).

Removing the 12 V battery
1. Press the release buttons (11) on the battery (12).
2. Pull the battery (12) up and out of the
12 V adapter (8).

Removing the 12 V adapter
1. Pull the latch (7) on the bottom of the
12 V adapter (8) towards you.
2. Pull the 12 V adapter up and out.
3. For storage, you can slide the 12 V adapter
(8) onto the guide (14) on the side
of the device.

Switching on/off

1. To switch the device on, press the
On/Off switch (2). The LED lamp illuminates
with maximum brightness.
2. To switch the device off, press the
On/Off switch (2).

Changing the illumination mode

When you switch the device on, the LED
lamp illuminates with maximum brightness.
Switch the illumination mode by pressing
the switch (1) next to the On/Off switch (2).

The repeating order of modes is: 2300 lm –
1000 lm – flashing

Working instructions

Do not stare into the battery-powered
LED flood lamp while it is on.

Swiveling the battery powered

LED flood lamp

1. Loosen the adjusting screw (4).
2. Rotate the handle (3) of the battery powered
LED flood lamp to the desired position.
3. Tighten the adjusting screw (4).

Hanging the battery powered LED flood lamp

Hanging the battery-powered
LED flood lamp on the hook
1. Fold the hook (5) outwards.
2. Hang the device horizontally.

Do not catch your fingers when hooking
and unhooking the hook (5).

Hanging the battery-powered

LED flood lamp using the keyhole bore

1. Insert a screw or nail at the desired position
on a wall.
2. The screw/nail head can have a diameter
of 7 – 10 mm.
3. Leave the screw/nail head protruding
at a distance of approx. 10 mm from the wall.
4. Hang the device on the keyhole bore (15).

Hanging the battery-powered

LED flood lamp on the baseplate

1. Insert a screw or nail at the desired position
on a wall.
2. The screw/nail head can have a diameter
of 7 – 10 mm.
3. Leave the screw/nail head protruding
at a distance of approx. 10 mm from
the wall.
4. Hang the device via the recess (6) on
the baseplate with teeth. The teeth allow
you to balance the device.

Tripod mount

Using the 1/4“ or 5/8“ internal thread (16),
you can screw the battery-powered LED
flood lamp to a tripod (not included in
delivery).

Cleaning

Switch the device off before cleaning
and remove the battery from the
device. Risk of electric shock!

• Clean the device with a soft, dry cloth
to avoid scratching the cover of the LED
lamp.
• Do not use any abrasive cleaning
agents or solvents. This could damage
the device irreparably.
• Do not use water or metallic aids. There
is a risk of a short circuit.

Storage

• For storage, you can slide the 12 V adapter
(8) onto the guide (14) on the side
of the device.
• Store the device in a dry and dustproof
location and out of reach of children.
• Remove the battery from the device before
storing it for a longer period.

Disposal and protection

of the environment

Remove the battery from the device and recycle
the device and packaging in an environmentally-
friendly manner. Instruction on how
to dispose of the rechargeable battery can be
found in the separate instruction manual.
Electrical appliances must not be
disposed of with the domestic waste.
Directive 2012/19/EU on waste electrical
and electronic equipment: Used electrical
devices must be collected separately for
disposal and recycled in an environmentally
sound manner.

Depending on the implementation in national
law, you may have the following
options:
• Return to a shop,
• Hand over to an official collection point,
• Return to the manufacturer/distributor.

We will dispose of any defective devices
that you send to us free of charge.
This does not affect accessories enclosed
with the old devices or tools without any
electrical components.

Hand the device and the power adapter in
to a recycling point. The plastic and metal
parts used on your device can be properly
sorted according to materials and grades
and efficiently recycled. Please contact our
service centre for more information.

Accessories

Accessories can be obtained at www.grizzlytools.shop
If you have issues ordering, please use the contact form. If you have any other questions,
contact the ”Service-Center” (see page 25).

Item Description ………………………………………………………… Product No.
8 20 V –> 12 V Adapter ………………………………………………………..91105913
9 Power adapter 100-240 V
EU ……………………………………………………………………………….80001284
UK ………………………………………………………………………………80001285

The operating device (power adapter) can be replaced with the original.

Garantie

Dear Customer,
This device comes with a three-year warranty
from the date of purchase. In case of defects,
you have statutory rights against the seller
of the product. These statutory rights are not
restricted by our guarantee presented below.

Terms of Guarantee
The term of the guarantee begins on the
date of purchase. Please retain the original
receipt. This document is required as proof
of purchase.
If a material or manufacturing defect occurs
within three years of the date of purchase
of this product, we will repair or replace –
at our choice – the product for you free of
charge. This guarantee requires the defective
equipment and proof of purchase to be
presented within the three-year period with
a brief written description of what constitutes
the defect and when it occurred.
If the defect is covered by our guarantee, you
will receive either the repaired product or a
new product. No new guarantee period begins
on repair or replacement of the product.

Guarantee Period and Statutory Claims for Defects

Defects

The guarantee period is not extended by
the guarantee service. This also applies for
replaced or repaired parts. Any damages
and defects already present at the time of
purchase must be reported immediately after
unpacking. Repairs arising after expiry
of the guarantee period are chargeable.

Guarantee Cover

The equipment has been carefully produced
in accordance with strict quality guidelines
and conscientiously checked prior to
delivery.

The warranty is only valid for material or
manufacturing defects. This warranty does
not extend to consumable parts exposed to
normal wear and tear.
This guarantee shall be invalid if the product
has been damaged, used incorrectly
or not maintained. Neither does it extend
to damage resulting from water, frost, lightning
and fire or improper transport. Precise
adherence to all of the instructions specified
in the operating manual is required for
proper use of the product. Intended uses
and actions against which the operating
manual advises or warns must be categorically
avoided.
The product is designed only for private
and not commercial use. The guarantee
will be invalidated in case of misuse or
improper handling, use of force, or interventions
not undertaken by our authorized
service branch.

Processing in Case of Guarantee
To ensure efficient handling of your query,
please follow the directions below:

• Please have the receipt and item number

(IAN 497678_2204) ready as

proof of purchase for all enquiries.

• Please find the item number on the rating plate.

• Should functional errors or other defects
occur, please initially contact the service
department specified below by telephone
or by e-mail. You will then receive
further information on the processing of
your complaint.
• After consultation with our customer
service, a product recorded as defective
can be sent postage paid to the service
address communicated to you, with the
proof of purchase (receipt) and specification
of what constitutes the defect
and when it occurred. In order to avoid
acceptance problems and additional
costs, please be sure to use only the
address communicated to you. Ensure
that the consignment is not sent carriage
forward or by bulky goods, express or
other special freight. Please send the
equipment inc. all accessories supplied
at the time of purchase and ensure adequate,
safe transport packaging.

Repair Service

For a charge, repairs not covered by the
guarantee can be carried out by our service
branch, which will be happy to issue
a cost estimate for you. We can handle
only equipment that has been sent with
adequate packaging and postage.
Attention: Please send your equipment to
our service branch in clean condition and
with an indication of the defect.
Equipment sent carriage forward or by bulky
goods, express or other special freight
will not be accepted.
We will dispose of your defective devices
free of charge when you send them to us.

Service-Center
GB Service
Great Britain
Tel.: 0800 1528352
(German phone number)
E-Mail (Germany):
[email protected]
IAN 497678_2204

Importer
Please note that the following address is
not a service address. Please initially contact
the service centre specified above.

Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
DE-63762 Großostheim
GERMANY
www.grizzlytools.de