westfalia 96 30 49 Biscuit Jointer Instruction Manual

westfalia 96 30 49 Biscuit Jointer

Product Information

• Product Name: Cordless Router
• Model Number: Art.Nr. 96 30 49
• Weight: 2339 g (without battery)
• Dimensions: 360 x 160 x 140 mm
• Battery: 18V Li-Ion (not included in delivery)
• No-load speed: 8,500 min-1
• Accessories: Dust bag, face spanner

Product Usage Instructions

1. Unpack the device and read the safety instructions provided.
2. Adjust the depth stop to the desired milling depth.
3. Set the milling angle using the spindle catch and angle fence.
4. Insert the battery pack into the device.
5. Attach the vacuum system for dust extraction.
6. Set the milling height using the height fence.
7. Change the router bit if necessary using the face spanner.
8. Turn on the device using the ON/OFF switch.
9. To avoid short circuit, ensure that the battery contacts are not bridged with nails, screws, or other small metal objects.
10. After use, remove the battery pack from the device and dispose of it properly. Do not throw it in the household garbage.

Note : Please refer to the safety instructions provided in the manuals of battery and charger before use.

OVERVIEW

1. ON / OFF switch
2. Handle
3. Drive motor
4. Additional handle
5. Spindle catch
6. Clamping screw for angle adjustment
7. Angle fence
8. Clamping screw for height adjustment
9. Adjustment wheel for milling depth
10. Depth adjust screw
11. Base plate
12. Dust extraction system
13. Dust bag
14. Face spanner
15. Center marking
16. Height fence
17. Milling width marking
18. Battery pack
19. Battery unlocking button

Dear Customers,
Instruction manuals provide valuable hints for using your new device. They enable you to use all functions, and they help you avoid misunderstandings and prevent damage. Please take the time to read this manual carefully and keep it for future reference.

TECHNICAL DATA

1. Battery*1 18 V Li-Ionen
2. Weight (without battery) 2339 g
3. Dimensions 360 x 160 x 140 mm
4. Milling discs diameter and thickness Ø 100 mm 3,9 mm
5. Inside diameter milling disc 22 mm
6. Spindle diameter M10
7. Number of teeth 6
8. No-load speed 8 500 min-1
9. Biscuit specifications #0, #10, #20, S, D, MAX
10. Protection class III
11. Sound pressure level*2
12. LpA = 74 dB (A)
13. KpA = 3 dB(A)
14. Sound power level*2
15. LWA = 85dB(A)
16. KWA=3dB(A)
17. Hand arm vibration*2
18. Ah = 1.732 m/s2
19. K = 1.5 m/s2

The declared vibration total value and the declared noise emission values have been measured in accordance with a standard test method. The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning! The vibration and noise emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used, in particular, what kind of work piece is machined. It is necessary to identify safety measured to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). Try to minimize the impact of vibration and noise. Exemplary measures to reduce vibration exposure include wearing gloves while using the tool, limiting working time, and using accessories in good condition.

Unbox device

ASSEMBLING

Adjust the depth stop

Set the milling height **Set the milling angle**

Set the milling depth

Attach vacuum system

Insert the battery

Start the device

Change the side milling cutter

SAFETY NOTES

Please note the included general safety notes and the following safety notes to avoid malfunctions, damage or physical injury.
Please also observe the safety notes in the manuals of battery and charger.

• Please read this manual carefully and use the unit only according to this manual.
• Make sure the operating voltage stated on the type label corresponds to the power mains available in your area.
• Persons with limited physical, sensorial or mental abilities are not allowed
• to use the unit, unless they are supervised and briefed for their safety by a qualified.
• Wood dust may be hazardous to your health. Always wear a dust mask.
• When using the unit, please wear ear protection and safety goggles.
• Check the biscuit jointer and the electrical connections for any damage and do not use the tool if the biscuit jointer or the cable is damaged.
• Use the biscuit jointer and the included attachments according to this manual and only for the intended purpose.
• Make sure the biscuit jointer is switched off before plugging in.
• Clamp the work piece with chuck or a vice to avoid slipping. When operating the machine always hold the biscuit jointer firmly with both hands. Always provide for a secure footing when working.
• Protect the biscuit jointer from moisture and do not immerse the machine in liquids of any kind.
• The biscuit jointer must be running at full speed before lowering into the work piece.
• Caution : Allow for run down time of the cutter blade after turning the biscuit jointer off. Wait for the machine to come to a complete stop before removing from the work piece.
• Do not force the biscuit jointer. Your biscuit jointer will do better job if you take it slowly.
• Avoid cutting nails and screws. Inspect the work piece and remove all nails and screws before cutting.
• Always switch off the biscuit jointer and then unplug before adjusting, while changing the attachments, when not in use and after work and while maintaining.
• Keep the ventilation slots clean and free from foreign objects. Make sure that dust cannot enter into the mechanical parts.
• Do not use a damaged blade. Replace it with a suitable new one.
• Do not work on pieces too small to safely clamp.
• Do not disassemble the machine and do not try to repair it yourself. Have the unit repaired by a professional or turn to our customer support service.
• Always use original replacement parts.

Additional safety instructions for batteries and battery chargers
WARNING : Lithium-ion batteries pose a risk of fire, burns and explosion if improperly used, stored or charged.

Use charger properly

• Before charging the battery, follow the instructions in the relevant section of this user manual for the correct use of the battery charger.
• Do not use the charger to charge batteries other than the ones supplied. Keep the battery charger clean; Foreign bodies and dirt can cause a short circuit and clog the ventilation holes. Failure to follow these instructions could result in overheating or fire.
• Allow batteries to cool for 15 minutes after charging or intensive use. Failure to follow these instructions could result in overheating or fire.
• Only charge the batteries in chargers recommended by the manufacturer. A charger designed for a particular type of battery may present a fire hazard if used with other batteries. Only charge the lithium-ion battery with the charger included in the scope of delivery or a charger specially designed for this item.
• Only use the rechargeable batteries provided for this purpose in the power tools. The use of other batteries can lead to injuries and the risk of fire.
• If the connection cable of the charger is damaged, it must be replaced by the manufacturer, an authorized service workshop or a specialist before use.
• The device is designed for use up to 2000 m above sea level.
• Keep the battery out of the reach of children.
• When not in use, store batteries in a dry place at room temperature (approx. 20˚ C).
• Do not open, disassemble, compress, heat above 60 ° C or burn batteries. Do not throw into fire or the like.
• When the battery is not in use, keep it away from paper clips, coins, keys, nails, screws, or other small metal objects that could cause the contacts to be bridged. A short circuit between the battery contacts can result in burns or fire.

Batteries do not belong in the household garbage.
For battery disposal please check with your local council.

EU DECLARATION OF CONFORMITY

Wir, die Westfalia Werkzeugcompany, Werkzeugstraße 1, D-58093 Hagen, declare by our own responsibility that the product
Lamellendübelfräse 18 V
Biscuit Jointer 18 V
Artikel Nr. 96 30 49
Article No. 96 30 49
is according to the basic requirements, which are defined in the European Directives and their amendments.
2011/65/EU
2011/65/EU
Restriction of the Use of certain hazardous Substances in electrical and electronic Equipment (RoHS)
2014/30/EU
2014/30/EU
Electromagnetic Compatibility (EMC)
EN 55014-1:2017+A11, EN 55014-2:1997+AC+A1+A2
2006/42/EU
2014/35/EU
Machinery
EN 62841-1:2015+AC, EN 60745-2-19:2009+A1
The technical documentations are on file at the QA department of the Westfalia Werkzeugcompany
Hagen, den 16. Dezember 2021 ___
Hagen, 16th of December, 2021 Thomas Klingbeil,

CUSTOMER SERVICES

• DEUTSCHLAND
  Westfalia Werkzeugstraße 1 D-58093 Hagen
  Telefon : (0180) 5 30 31 32
  Telefax : (0180) 5 30 31 30
  Internet : www.westfalia.de

• ÖSTERREICH
  Westfalia Moosham 31 A-4943 Geinberg OÖ
  Telefon : (07723) 4 27 59 54
  Telefax : (07723) 4 27 59 23
  Internet : www.westfalia-versand.at

• SCHWEIZ
  Westfalia Wydenhof 3a CH-3422 Kirchberg (BE)
  Telefon : (034) 4 13 80 00
  Telefax : (034) 4 13 80 01
  Internet : www.westfalia-versand.ch

DISPOSAL

Dear Customer, Please help avoid waste materials. If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of valuable materials, which can be recycled. Please do not discharge it in the rubbish bin, but check with your local council for recycling facilities in your area

References

• Westfalia Versand Österreich | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
• Westfalia Versand Schweiz | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
• Westfalia Versand Deutschland | Werkzeug ✓ Garten ✓ Technik ✓ & mehr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>