BOULT AUDIO RITO True Wireless Earbuds User Manual
- June 9, 2024
- BOULT AUDIO
Table of Contents
BOULT AUDIO RITO True Wireless Earbuds
Know your Rito
What’s in the box
- Charging Case
- Earbuds
- Type C Charging Cable
- User Manual
- Extra pair of eartips
Product specification
- Product Name: TWS Bluetooth Headset
- Model: Boult Audio AirBass
- Bluetooth Version: V5.3
- Speaker: 10mm
- Bluetooth Range: -1Dm/33ft (without any obstacles)
- Earbud Charging Time: 45 mins
- Frequency Range: 20Hz-20KHz
- Technology: HFP/HSP/A2Dp/AVRCP
- Input DC5V=; lA
How to use your Rito
Touch Control
- The Touch Area (MFB Touch Panel) is located in the upper part of earbuds handle.
Wearing Earbuds
- The earbud marked with Lis worn on the left ear and the earbud marked with R is worn on the right ear.
Power on/Off
- Power on: Auto: Open the charging case and take out the earbuds to power on. Manually: Press and hold the MFB for 3s.
- Power off: Auto: Place both earbuds in the charging case, and close the lid. Manually: Press and hold the MFB for 5s.
- Play/Pause: Tap the MFB once
- Next Track: Double tap the right MFB
- Previous Track: Double tap the left MFB
- Volume+ : Triple tap the right MFB
- Volume- : Triple tap the left MFB
- Game Mode: Tap four times the MFB
- Voice Assistant: Long press the MFB for 3s.
- Answer the call: Tap the MFB once
- End Call/ Reject: Double tap the MFB
Pairing
- Open the charging case, and take out the earbuds, earbuds will pair automatically, One of the earbuds flashes blue and red, the other earbud light goes out.
- Activate bluetooth on the device, turn on Bluetooth, search for pairing name “Boult Audio Airbass” and click on it.
- Single Mode: When on dual mode, put one earbud into the charging case. only take one earbud out of the charging case and connect it.
- Bluetooth Lost: Turn off mobile phone’s Bluetooth, earbuds will enter pairing mode and can pair with other devices. If the connection range is exceeded, the earbuds will enter the back connection mode. No connection within 5 minutes, the earbuds will turn off.
Reset
If your earbuds fail to pair, or only one works, reset them.
- Delete all “Boult Audio Airbass” Bluetooth records on the phone and turn off bluetooth.
- put earbuds in the charging case and then take out to pairing modes, tap L&R 5 times simultaneously, and hear the “DU” prompt voice to clear all pairing.
- Put the earbuds back into the charging case.
Voice Prompt
- You will hear ‘power on’ when the headset powers on.
- You will hear ‘power off’ when the headset powers off.
- You will hear ‘connected’ when the headset is paired.
- You will hear ‘low battery’ when the headset is in low
power status
- You will ‘gaming mode’ when headset is in gaming mode.
Maintenance Instructions
- Warranty is valid/invalid only basis of the below criteria:
- The product should be purchased through legal and formal channels to be applicable for warranty.
- Damaging the product intentionally/unintentionally, or due to natural disasters, etc. is not covered in the warranty.
Features
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>