Baseus F01B Tri-Mode Wireless Mouse User Manual
- June 9, 2024
- Baseus
Table of Contents
Baseus F01B Tri-Mode Wireless Mouse
Overview
Left button
Right button
Scroll wheel
DPI button
Press to change the mouse sensitivity (DPI)
Note: 1600DPI mouse sensitivity by default.
Mode switch button
Press to switch between connection modes.
ON/OFF button
Indicator
BT5.0 mode
2.4G mode
USB receiver
Content
Wireless mouse ×1
USB receiver ×1
User manual ×1
Warranty card ×1
Connection Steps
Battery Installation
Open the cap and install the batteries inside (make sure the polarities are
connected properly), and close the cap.
2.4G Mode Connection
- Turn on the mouse, and take out the USB receiver on the back.
- Connect the receiver to the device. Switch to the connection mode to 2.4G.Click and move the mouse until the
Wireless Mode Connection
- Turn on the mouse, switch the connection mode to wireless mode, and enter the pairing state.
- Turn on the wireless of the device, and search to pair. Select model: Baseus F01B.
Specifications
Name: Baseus Creator Tri-Mode Wireless Mouse
Model No.: F01B
Material: ABS
Transfer Distance: 20m, 10m
Connection Type: 2.4G mode + dual-wireless mode
Wireless Version: BT5.0,
Sensitivity: 800/1200/1600DPI
Response Frequency: 250Hz
Compatible Systems: Windows, HarmonyOS, Apple OS, Linux, Vista, etc.g on
Warnings
Improper use of the product can easily cause damage to the product or may
endanger personal and property safety.
- The product contains battery inside, DO NOT expose the product to fire sources, high temperature, strong sunlight orstrong magnetic field.
- The recommended use temperature is 0-40℃.
- DO NOT attempt to personally disassemble or modify the product under any circumstance, for it may cause fireor damage the product.
FCC NOTE：
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15ofthe FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>