Baseus K01B Wireless Tri-Mode Keyboard User Manual
- June 9, 2024
- Baseus
Table of Contents
Baseus K01B Wireless Tri-Mode Keyboard
User Manual
Before using the product, thoroughly read this manual. Keep the manual for future reference.
Specifications
Name: Baseus K01B Wireless Tri-Mode Keyboard
Model No.: K01B
Operating Voltage: 3V
Operating Current: 2mA
Compatible System: Windows, Apple OS, Linux, Harmony OS, Android
Connection Instructions
2.4G Connection Mode
- Install two AAA batteries, and press the power button on the right upper corner, the keyboard will enter the 2.4G connection mode.
- Take out the USB receiver and connect it to the computer, and wait for the computer to install the driver, then you can use the keyboard.
- If step 1 and step 2 fail to pair, please press and hold “esc” and “+” at the same time to enter 2.4G forced pairing, during when the LED flashes green, and repeat the step 2 above.
BT1 Connection Mode
- Press the BT1 button on the keyboard and the indicator flashes slowly, entering the BT1 mode.
- Press and hold the BT1 button for 3s and the indicator flashes quickly, entering the BT1 searching mode.
Turn on wireless on your computer, and select “Baseus K01B-BT3.0” to connect if your operating system is
Win 7 or earlier, or select “Baseus K01B-BT5.0” to connect if your operating system is Win 8 or above.
Function Description:
Note: The multifunction key is to test the built-in software, due to different codecs, other APPs may be different.
Attention
Indicator flashes red, meaning the battery is low, please change the
batteries.
When the keyboard shuts down itself or stops working, it means the battery is
to low to maintain operation, please change the batteries immediately.
Please remove the batteries if you decide to not use the keyboard for a long
time.
Actual battery life may vary depending on your personal use habit or use
environment.
Warning: Keep the product away from fire sources, and DO NOT attempt to
personally disassemble or modify the product, please contact customer service
for help if you have any
FCC NOTE：
This device complies with Part 15 of the FCC Rules.Operation is subject to the
following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.