RAIN HARVESTING RHAC10 Hood Upgrade for Leaf Eater Advanced Installation Guide
- June 9, 2024
- Rain Harvesting
Table of Contents
RAIN HARVESTING RHAC10 Hood Upgrade for Leaf Eater Advanced Installation Guide
PRODUCT DETAILS
If your rain head is splashing water or leaves, upgrade your rain head with The Hood.
The protective cover eliminates any splashing – which ensures you collect 100% of the water flowing through your downpipe, and prevents leaves from falling onto the area below.
Installation
WHAT’S IN THE BOX?
- The Hood Upgrade Cover
- The Hood Upgrade Screen
TOOLS/MATERIALS YOU MAY REQUIRE
- Tape measure
- Marker pen
- Saw
- Screws
- Screwdriver or drill
- Solvent cement glue
HOW IT WORKS
THE HOOD UPGRADE INSTALLATION
- Remove and discard your Leaf Eater Advanced screen.
- Attach The Hood screen to the Leaf Eater Advanced body, making sure the screen is fully seated all the way around and flush with the body.
- Ensure your inlet pipe is cut to sit at least 20mm below the top surface of The Hood cover.
- If your inlet pipe is 100mm or 4”, you will need to cut away the multi fit inlet so your inlet pipe can fit inside.
- Slide the cover up your inlet pipe and fit to the screen, making sure that the skirt around the edge is fully seated in the corresponding channel on the screen.
Product Specifications
Hood Upgrade for Leaf Eater Advanced
All dimensions are in mm unless otherwise stated.
Maintenance
- Slide The Hood cover up your inlet pipe and remove The Hood screen.
- With the screen removed, either brush off or wash the debris from the screen.
- Reinsert the screen to the Leaf eater Advanced body, making sure the screen is fully seated all the way around and flush with the body.
- Reinstall the cover, making sure that the skirt around the edge is fully seated in the corresponding channel on the screen.
A common misconception about collecting rainwater is that all you need is a roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on to deliver the volume – or quality – of water that you require. That is where we can help.
With some thought, your rain harvesting system can provide you with cleaner water and lots of it. Whether you’re completely reliant on tank water or wanting to keep the garden green, our simple steps will help you achieve your goal.
The Rain Harvesting approach to rainwater collection involves using tested and proven products to make quality rainwater available for use in and around your property. You don’t need much to get started and you will be surprised how easy it is to get the most out of your rainwater system.
COMPLIANCE
-
AS/NZS 3500.3:2003 Plumbing and Drainage – Stormwater Drainage
-
enHealth Council
– Guidance on the Use of Rainwater Tanks
– Preventing Mosquitoes Breeding -
HB230:2008 Rainwater Tank Design and Installation Handbook
-
Queensland Health Regulations 1996 (Part 8 – Mosquito Prevention)
DISCLAIMER This product specification is not a complete guide to product usage. Further information is available from Rain Harvesting Pty Ltd and from the installation and Operating instructions. This specification sheet must be read in conjunction with the installation and Operating Instructions and all applicable statutory requirement. Product specifications may change without notice. © Rain Harvesting Pty Ltd
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>