KitchenTour KT-CS6002 Coffee Scale with Timer Instructions
- June 4, 2024
- KitchenTour
Table of Contents
KitchenTour KT-CS6002 Coffee Scale with Timer
Prep work
- Coffee scale
- Batteries
- 3 weights 500g,1000g,2000g each one
STEP 1
Press four buttons on/off, start, unit, tare at the same time in
the off state. Release until CAL appears.
STEP 2
The default auto shutdown time appears on the screen is 240s. You
can press Tare decide the time you want to shut down automatically, there are
0, 60, 120, 180, 240 to choose from. 
After selecting the automatic shutdown time, press the UNIT button
to go to the step 3. If you only want to change the shutdown time, you also
need to run all the 6 steps to complete the procedure.
STEP 3
After 3000.0g (3000g) appears, press Unit to step 4.
STEP 4
After a random number three digits appears, continue pressing
Start to step 5.
STEP 5
When CAL appears, you don’t need to press any button, it will jump
directly to step 6.
STEP 6
Follow the on-screen prompts to place the weights in sequence to
complete the calibration process. Ready to use as soon as the calibration
process is completed.
Warim Tip
- The above 6-step process can not be quitted when in the process, if the setting error, you can press On/Off for seconds or directly pull out the battery to re-start.
- After reinserting the battery, the scale will return to default setting including automatic shutdown time and re-calibration.
- If you just set the auto-off time (without recalibration), you still need to complete the above 6 step process.
- So, if you simply set the auto-off time, you also need to prepare these weights 500g, 1000g, 2000g.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>