HALCYON EX381 UPS Underwater LED Spot Installation Guide
- June 10, 2024
- HALCYON
Table of Contents
EX381 UPS
Underwater LED Spot
EX381 UPS Underwater LED Spot
OUTLINE DIMENSION
BOM
- Front ring
- Reflector
- Housing
- Bracket
-
Colour Temperature: 3000k
-
Input Voltage: 24V DC Constant Voltage (wire in parallel)
-
Ingress Protection Rating: IP68
-
Max installation depth 1m
-
316 STS construction
-
This luminaire has been designed to run underwater and utilises water to displace heat generated while operating.
NOT SUITABLE FOR USE OUTSIDE OF WATER -
To prevent voltage drop over a circuit total luminaire wattage plus voltage drop over the length of a cable run and cable gauge must be taken into account.
-
Always try to use a Constant Voltage Driver double the luminaire circuit wattage.
-
Multistrand UV protected flex should be utilised for all exterior 24V DC CV circuits.
-
All cable joints must be a resin or IP68 type – NOTE: standard crimps, terminal blocks and PVC tape are not suitable cable joining methods.
-
Applicable environment temperature: -20°C …. +40°C
-
All installation work must be carried out by a registered electrician.
WIRING DIAGRAM
SPECIFICATIONS
| Housing | Molding shaped stainless steel 316L |
|---|---|
| Front cover | Molding shaped stainless steel 316 |
| PMMA | 8mm |
| Gasket | Silicone Gasket |
| Reflector | Optical lens,efficiency≥85% |
| PCB | Excellent heat conductivity aluminum.coefficient of Conductivity≥2.0w/mk |
| Driver | Constant current output Single color LED=1-circuit output |
| Power Cable | H07RN-F 2×1.0mm L=3m(for single color) |
| Item No. | Light source |
| oprating current (mA) | Typical |
| Comsumption (w) | Typical |
luminance (1m)
---|---|---|---|---|---|---|---
EX381 UPS| 1 X 8W| R5| 40 V Beam| 24VDC| 416| lOW| 6071m
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>