AVAYA XT4000 Series XT Flex Camera User Guide

AVAYA XT4000 Series XT Flex Camera User Guide

Product Instruction

Congratulations on your purchase of the PTZ Flex Camera for the Avaya Video Conferencing XT Series. It provides a full HD video source to your endpoint, with:

• HD 1080 at 60 frames per second (fps)
• 5x optical zoom
• optional 8x digital zoom (total 40x)
• optimal horizontal field of view for video conferencing rooms

Package Content:

• Avaya XT Flex Camera
• First Camera Cable: 2.5m triple camera cable, including power, VISCA and DVI-D/HDMI

CAUTION:
Make sure all units are switched off whenever connecting or disconnecting devices.

Setting Up this Device Connect the cables as detailed in the steps below to complete the setup of your Avaya XT Flex Camera. For  details on how to use the system after setup, see the User Guide for Avaya Video Conferencing XT Series available in https://support.avaya.com. The Avaya XT Flex Camera is suitable for all XT Series (XT4000 Series, XT5000 Series, XT7000 Series, and XT Executive 240).

Note: VISCA out is not available however, it is possible to use it as the last element in a VISCA cascading chain.

Connecting the XT Flex Camera to the XT
Use the cable supplied to connect the Flex Camera to the XT Series endpoint. Attach the three connectors to the camera, and attach the other end to the codec.

Step 1.
Insert the three connectors to the sockets at the rear of the camera:

• The DVI connector to the DVI socket.
• The 8-pin connector to the Ctrl Camera IN socket.
• The power connector to the DC IN 12V socket.
  

Step 2.
Attach the two connectors to the camera sockets at the rear of the XT endpoint:

• The HDMI connector is connected to the vertical socket
  

• The connector for power and serial control to the horizontal socket.

Step 3.
Ensure that the camera input is enabled in the main menu Configure > Advanced > I/Oconnections > Cameras. See the XT User Guide on the Avaya Support Site for details.

At the bottom of the camera, there is a dip switch with four pins. The tables below outline pin position based on your camera’s release. Setting these pins on your camera allows you to use the XT remote control to control your camera.
Note: Pin 1 and 2 settings are for hardware release V02, V03, and V04 only.

Default Flex Dip Switch Matrix

| FLEXVO0| FLEXVO1| FLEXV02| FLEXV03| FLEXVO4
---|---|---|---|---|---
DIP SWITCH 1| OFF| OFF| ON| ON| ON
DIP SWITCH 2| OFF| OFF| ON| ON| ON
DIP SWITCH 3| OFF| OFF| OFF| OFF| OFF
DIP SWITCH 4| OFF| OFF| OFF| OFF| OFF

DIP Switch (DIP1~2)

NOTE: You can find the hardware release of your camera on the sticker on the bottom of the camera next to dip switch. The possible values are: -V04, – V03, – V02, – V01. If not specified it is V00.

About Avaya

Businesses are built on the experiences they provide and every day millions of those experiences are built by Avaya (NYSE:AVYA). For over one hundred years, we’ve enabled organizations around the globe to win— by creating intelligent communications experiences for customers and employees. Avaya builds open, converged and innovative solutions to enhance and  simplify communications and collaboration—in the cloud,on premise, or a hybrid of both. To grow your business,we’re committed to innovation, partnership, and a relentless focus on what’s next. We’re the technology company you trust to help you deliver Experiences that Matter. Visit us at www.avaya.com.

© 2020 Avaya Inc. All Rights Reserved. Avaya and the Avaya logo are trademarks of Avaya Inc. and are registered in the United States and other countries. All other trademarks identified by ®, TM, or SM are registered marks, trademarks, and service marks, respectively, of Avaya Inc. 04/20 • 700512612 Avaya XT Flex Camera – Quick Setup Guide

References

• Avaya | Leader in Cloud-Based UCaaS, CCaaS, & CX Solutions
• Avaya | Leader in Cloud-Based UCaaS, CCaaS, & CX Solutions
• Manual-Hub.com – Free PDF manuals!
• support.avaya.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>