HALCYON LED336 1200mm Slice Long Batten Select 3K-4K + 29W-38W Instruction Manual
- June 10, 2024
- HALCYON
Table of Contents
Model
| Voltage| Wattage| Luminous Flux| W/0 (mm)| H (mm)
---|---|---|---|---|---
Slice 90 Pendant| 220-240V~| 29W| 2200LM(Warm White)
2300LM(Neutral White)
2300LM(Cool White)| 900|
130/55
Slice 120 Pendant
| 220-240V~| 29W| 2200LM(Warm White)
2300LM(Neutral White)
2300LM(Cool White)| 1200| 130/55
Slice 120 Pendant| 220-240V~| 38W| 2800LM(Warm White)
3000LM(Neutral White)
3000LM(Cool White)| 1200|
130/55
Suitable for following version; Warm White:2700K-3200K Neutral White:3800K- 4200K Cool White:6000K-6600K
Installation instruction
A 680 (0.9m)/800 (1.2m)
- switch
- Adjust the height
- Always follow this instruction to ensure correct and safe installation and functioning of the luminaire and keep it for future reference.
Always isolate the power before commencing installation.
- If in doubt, consult a qualified electrician. Ensure that you always install the luminaire to the relevant regulations.
Installation note: Do not install on the same circuits as Metal halide,
Fluorescent and other “Low power factor” devices.
When installed on the same circuit it can cause flickering and/or premature
failure of the “high power factor” electronic drivers. The harmonic distortion
from low power factor devices alters the Waveform of the AC supply which can
cause componentry in high power factor electronic drivers to resonate, run
over temperature and fail after prolonged exposure.”