KRAFT BDW-250S Chest Freezer User Guide

June 10, 2024
KRAFT

KRAFT BDW-250S Chest Freezer

KRAFT BDW-250S Chest Freezer product

Product Information: Chest Freezer

This product comes in four models: BD(W)-250S, BD(W)-310S, BD(W)-365S, and BD(W)-435S, and four colors: BD(W)-250BL, BD(W)-310BL, BD(W)-365BL, and BD(W)-435BL. It has a maximum capacity of 8 and runs on R600a refrigerant.

Product Specifications:

  • Temperature range: -15 to +38 degrees Celsius
  • Voltage: 220-240V / 50Hz
  • Refrigerant: R600a

Product Usage Instructions:

  1. Unpack the chest freezer and remove all packaging materials.
  2. Place the chest freezer in a well-ventilated area with enough space for air circulation around the unit.
  3. Plug the chest freezer into a grounded electrical outlet with the voltage and frequency specifications that match the product.
  4. Turn the temperature control knob to the desired temperature level. The recommended temperature is between -18 and -20 degrees Celsius.
  5. Wait for 30 minutes after plugging in the unit before placing any items inside.
  6. Arrange the items inside the chest freezer in a way that allows for air circulation and easy access to the items.
  7. Clean the chest freezer regularly with a damp cloth and mild detergent. Do not use abrasive cleaners or solvents.
  8. Defrost the chest freezer when the frost build-up exceeds 5-6 mm. Defrosting can take up to 24 hours.
  9. When transporting the chest freezer, turn it off, remove all items inside, and secure the lid with tape or a rope.

DEAR BUYER!
Congratulations on your purchase of the KRAFT chest freezer. We are sure that it will become your reliable assistant in freezing and preserving food. If you encounter any problems while using this chest freezer, please contact us.

Thank you for your purchase!
Avoid extreme temperature changes. Rapid temperature change (e.g. when the unit is moved from freezing temperature to a warm room) may cause condensation inside the unit and a malfunction when it is switched on. In this case leave the unit at room temperature for at least 6 hours before switching it on. If the unit has been in transit, leave it indoors for at least 2 hours before starting operation. After storing the chest freezer at low temperatures or after transporting it in winter conditions, it can be turned on no earlier than after 6 hours of staying at room temperature in unpacked form.

SAFETY INFORMATION

For your safety and proper use of the chest freezer, please read these instructions carefully before using them, and save them for rereading after transporting or selling the appliance. Improper handling of the device may cause damage to the device, cause material damage, or cause damage to the user’s health. The chest freezer is designed exclusively for cooling and freezing food products in domestic conditions or conditions close to domestic ones, such as:

  •  places of public catering;
  • provision of ready-made food;
  •  similar wholesale and retail services.

The use of the chest freezer for other purposes, violation of the rules of installation, operation, cleaning and safety measures, as well as noncompliance with temperature conditions, deprives you of the right to warranty service.
ATTENTION: The manufacturer is not responsible for any damage caused by improper use of the device or noncompliance with safety and safety measures.

  •  When removing the device from its packaging, make sure that it is intact and not damaged. Keep the packaging materials away from children. Dispose of the packaging properly.
  •  This appliance is not intended for use by persons with reduced physical or mental capabilities (including children under 8 years of age), or by persons who do not have sufficient knowledge and experience in its use, unless they are under the supervision of a person responsible for their safety. Children should not play with the elements of the device. The appliance must not be serviced or cleaned by children without adult supervision.
  •  The use of the chest freezer by children is possible only under the supervision of an adult. When the chest is not in use, make sure that children do not climb inside and do not lock themselves from the inside by slamming the door.
  •  Before the first (and each subsequent) switch-on, check the device for damage and whether the technical specifications indicated on the product correspond to the power supply parameters.
  •  If the appliance or the power cord is damaged in any way, do not connect it to the mains. Report the damage to the store where the product was purchased, contact the service center for examination and repair. Do not attempt to repair it yourself. In this case, do not throw away the packaging.
  • It is not safe to disassemble, repair, or make any changes to the chest freezer. Any damage to the electrical wiring of the appliance can cause an electric shock, fire, or short circuit. In the event of a malfunction, you should immediately contact an authorized service center, specifying the type of problem and the model of your chest freezer. Only original spare parts can be used for repairs. Unqualified repair removes the device from warranty service.
  •  If you plan to go somewhere for an extended period of time, disconnect the chest freezer from the power supply, remove the food and wash it well from the inside. Leave the door open to prevent the appearance of an unpleasant smell.
  • RISK OF ELECTRIC SHOCK
  • The chest freezer must be connected to the 220-240 V / 50 Hz power supply via a grounded outlet with a current of at least 10A. Incorrect grounding or a deviation of the voltage parameters by more than 10% can cause unstable operation of the device or electric shock.
  • Do not plug the power cord into the wall outlet until the appliance has been installed. Make sure that the power plug is easily accessible. Do not touch the power cable plug with wet hands. Wipe the plug dry, clean it from dust and carefully insert it into the outlet. Dust, water, or weak contact can cause fire or electric shock.
  • The chest freezer must be disconnected from the power supply when moving, servicing, or repairing. To disconnect, hold on to the power plug, and do not pull the power cord.
  • Do not use the appliance with a damaged power cord or outlet.
  •  Do not twist, bend, or extend the power cord. Do not place heavy objects on it. Make sure that the cord does not touch sharp edges or hot surfaces.
  •  Do not use the chest freezer outdoors, do not expose it to rain, moisture, direct sunlight, or other atmospheric phenomena , as well as in rooms with high air humidity at an air temperature below 0°C. Do not place the appliance on a wet surface , as well as in places of smoke and dust.
  • Do not immerse the appliance in water, and do not allow water or any liquids to enter any part of the appliance. Never touch it with wet hands.
  • FIRE HAZARD
  •  Use a separate outlet to connect the chest freezer. Using the same outlet for multiple appliances may cause a fire.
  •  Make sure that the power cord plug is not damaged or deformed. A faulty plug can overheat and cause a fire. Do not use adapters, extension cords, or «T-pieces» to connect the appliance.
  •  If you smell a smoke of a wire, turn off the power supply at the distribution board, unplug the plug and contact the service center.
  •  Avoid touching the heated parts of the chest freezer (compressor, condenser) with your hands and objects to avoid possible burns and fires.
  •  Install the chest freezer away from heat sources and heating devices, beware of sources of ignition.
  •  Ventilate the room where the chest freezer is installed well, as a lack of air circulation around the appliance may cause it to overheat.
  • DANGER OF EXPLOSION
  •  Do not use or store flammable materials such as ether, gasoline, alcohol, liquefied petroleum gas (propane-butane), sprayers, medicines, or cosmetics in the chest freezer. This can lead to an explosion, fire, damage to stored products, or a chemical reaction.
  • The refrigerant (R600, isobutane) contained in the chest freezer system, is a natural gas under high pressure, the most compatible with the environment and safe, yet combustible.
  • RISK OF DAMAGE
  • Install the chest freezer on a flat, hard, dry surface to prevent it from falling and to avoid injury or death.
  •  During transportation and installation of the chest freezer, make sure that the cooling system is not damaged.
  • Safety precautions must be observed when moving the chest freezer. It must be moved by at least 2 people and in no case behind the door, the hinges are not designed for the weight of the chest freezer and may break. Do not place heavy objects on the chest freezer. Do not use it as a countertop for anything.
  •  Do not place children, pets, or electrical appliances inside the chest freezer. Make sure that they do not damage the chest freezer or the power cord.
  • Do not put bottles of carbonated drinks in the chest freezer, as when the liquid is frozen, the pressure in the container increases, which can lead to an explosion and damage to the chest freezer.
  •  After disconnecting the chest freezer from the mains, turn it on again no earlier than 5 minutes to avoid damage to the compressor.
  •  Do not touch food from the chest freezer with wet or wet hands, as this may cause frostbite and skin damage.
  •  Ice can cause skin damage and frostbite if consumed directly from the freezer chamber.
  • Do not use mechanical devices to break the ice from the inner walls of the freezer or other ways to speed up the defrosting process.
  •  Do not allow fats and oils (including vegetable oils) to get on the body and plastic parts of the device to avoid their damage. Do not heat the plastic parts.
  •  Keep the chest freezer and the door seal clean. Do not use sharp metal scrapers, caustic and abrasive cleaning products, as they can scratch the surfaces of the chest freezer.
  • ATTENTION: To avoid overloading the network, do not use other high-power  appliances in the same circuit.

DEVICE DESCRIPTION

  1. Basket
  2.  Chest door (cover)
  3. Case
  4. Drain hole
  5. Basket
  6. Control panel
  7. Thermostat knob
  8. Indicator light
  9. Feet/Wheels
  • The images and drawings in this manual are for informational purposes only. The purchased product may differ from the one shown in the images / diagrams.

INSTALLATION AND CONNECTION

SPACE REQUIREMENTS

  • The chest freezer is not built-in. Ventilation openings on the chest must be open, the recommended distance from them to other equipment or walls of the room: at least 90 cm from above, 20 cm from the back and sides. Well ventilate the room in which the chest freezer is located.
  • Make sure that the appliance is in a stable position and is installed on a solid and level floor.
  • Do not install the chest freezer near heat sources, direct sunlight, or high humidity, as well as smoke and dust formation.
  •  Make sure that the voltage of the electric current specified in the instructions corresponds to the parameters of your power supply. Do not use adapters, extension cords, or «T-pieces» to connect the appliance.
  • If necessary, replace the power cord, make sure that it meets the applicable standards and meets the product specifications.
  •  Before use, wash the chest freezer thoroughly with a soda solution and wipe dry with a soft cloth. Install the removable baskets in the appropriate places.

THE CONDITIONS OF ACCOMMODATION
Install the appliance in a room where the ambient temperature corresponds to the label on the climate class of the chest freezer.

Climate class Ambient temperature Room characteristics
SN Subnormal +10°C to +32°C

rises above +32°C, then you can only use the freezer chest in an air- conditioned room. In winter, the room should be heated.
N| Normal| +16°C to +32°C| Suitable for poorly heated rooms: cold corridors, basements.
ST| Subtropical| +16°C to +38°C| Suitable for southern regions where the air temperature in summer exceeds +32°C.
T| Tropical| +16°C to +43°C| Suitable for hot climates, or if the refrigerator is operated in a small room on the sunny side.

GROUNDING
This appliance is equipped with a grounded plug installed on the power cord. Therefore, it must be connected to an appropriate electrical outlet to protect against short circuits.  The installation, connection and grounding of the electrical system must comply with the provisions of European standards, as well as applicable local regulations. The ground cable must not be interrupted by the switch. If your apartment does not have a ground connection, contact a qualified electrician to install it.
ATTENTION: Before servicing the product, turn off the electrical power completely.

CONNECTION

  • Recommended to wait at least 6 hours before connecting the chest freezer to the power supply for the oil to be distributed in the compressor after transport.
  • After connecting, the chest freezer must first work for 2-4 hours before loading fresh or frozen food into it.
  • In case of an unexpected power outage in a high-temperature environment, the chest freezer ensures that the food remains safe for several hours. To increase this time, it is recommended to open the door as little as possible and not to put new products in the chamber.

ATTENTION: The power outlet should be freely accessible, and the chest freezer should be easily connected to the power grid.

OPERATION

TEMPERATURE CONTROL
for the models BD(W)-250S, BD(W)-310S, BD(W)-365S, BD(W)-435S
The temperature is adjusted by means of a rotary switch (thermostat). The green indicator on the control panel lights up when the compressor is switched on and running. The compliance of the temperature conditions with the provisions of the thermostat is indicated in the table.

Position Temperature
1 -14°С
2 -15°С
3 -16°С
4 -17°С
5 -19°С
6 -21°С
7 -24°С
Max -32°С (if an ambient temperature is not higher than 25°C).

for the models BD(W)-250BL, BD(W)-310BL, BD(W)-365BL, BD(W)-435BL To change the temperature of the freezer, press the “+” or “-” buttons. The temperature is adjustable from -14°C to -22°C. To start the fast freezing mode, press the “Super” button, then “SF” will appear on the display. Press the “Super” button again to cancel the fast freeze mode.KRAFT BDW-250S Chest Freezer
04 The control panel is automatically locked after 30 seconds. To unlock, hold down the “+” or “-” buttons for 3 seconds. If the temperature inside the freezer rises above -8°C, an audible alert will sound and the display will show “ht”. To turn off the alert, press any button on the control panel  or wait for the automatic shutdown (after the temperature drops to -12°C).

  • The temperature values given above may differ from the actual values, depending on the installation location of the product, the type of operation and other external factors.

ATTENTION: Do not block the air vents of the chest freezer and do not allow them to become clogged. The continuous circulation of cold air allows you to maintain a constant temperature inside the chamber.

RECOMMENDATIONS FOR STORING AND FREEZING FOOD
Fresh food and fish that are planned to be stored for a long time; it is recommended to freeze at the lowest temperatures. Fast freezing prevents the formation of small ice crystals inside food products, without disturbing their taste qualities. At the same time, the original freshness and quality of the products after defrosting is preserved. For quick freezing, set the lowest temperature and wait 5-6 hours before placing food in the freezer. The speed of freezing of products depends on the mass of a single load: the greater the mass of simultaneously placed products, the longer the freezing time. After the quick freeze, set temperature to its original position (it is recommended to use the quick freeze mode for no more than 24 hours).

  •  It is not recommended to store perishable foods in the chest freezer at low temperatures, such as bananas and melons.
  •  Do not freeze previously thawed food. This will lead to the loss of their taste qualities and useful substances.
  •  It is not allowed to put hot, warm food and drinks in the chest freezer. Before placing in the chest freezer, they should be cooled to room temperature.
  • Store food in sealed packaging (plastic wrap, aluminum foil, etc.) to prevent it from spoiling due to moisture evaporation.
  •  Do not place food too close to the inside of the freezer compartment, as they can freeze. The distance from the loaded products to the inner walls of the chest should be at least 10 cm.
  • Do not place liquid food in glass containers, carbonated drinks and other liquids in plastic bottles and metal cans in the chest freezer, as the containers may burst due to increased pressure when frozen.
  •  Do not open the door frequently to avoid warm air entering the chest freezer to save energy. If there is an unscheduled power outage, do not open the chest freezer door to keep the cold inside as long as possible.
  •  Do not store pharmaceutical products or other products that require strict temperature control in the chest freezer.

FEATURES OF THE WORK
Do not move or tilt the chest freezer during operation. Noise may occur in the compressor. This feature does not affect the performance of the compressor. The refrigerant circulating inside the cooling system may gurgle softly even when the compressor is not running. During the operation of the chest freezer, you can also hear: the rustle of the fan impellers; the clicks of the temperature sensor-relay; the buzzing of the air damper drive; the murmur of the refrigerant circulating through the pipes of the refrigeration system; light crackling during temperature deformations of materials. Don’t worry, these sounds are not associated with any defect and are of a functional nature.

DEFROSTING AND CLEANING

During operation, frost forms on the inner walls of the chest freezer. Therefore, it is recommended to carry out full defrosting 2-3 times a year or when the thickness of the frost layer is more than 5 mm.

  • If you plan to go somewhere for an extended period, disconnect the appliance from the power supply, remove the food, defrost and wash it well from the inside. Leave the door open to prevent the appearance of an unpleasant smell.

ATTENTION: Before defrosting and washing the chest freezer, make sure that it is disconnected from the power supply and that the power cord plug is unplugged.
Choose a time when the stock of frozen food will be small, and proceed as follows:

  1. Disconnect the chest freezer from the power supply.
  2. Remove the food from the chest freezer and transfer it to another freezer or refrigerator. If this is not possible, wrap the food first in a few sheets of paper or towels, and then in a thick blanket and put it in a cool place.
  3.  Remove all baskets from chest freezer and leave the door open. Open the drain plug located at the bottom of the chest and install a container to collect the defrost water.KRAFT BDW-250S Chest Freezer 05
  4. Clean as much frost as possible from the inner walls of the freezer using a plastic scraper. Do not use metal or sharp objects to break the ice!
  5. To speed up the thawing process, place a bowl of hot water in the chest freezer. As the ice melts, remove it with a plastic scraper. Collect the remaining meltwater with a dry cloth.
  6. After defrosting is complete, wash and wipe the chest freezer dry with soft cloth cloths.

ATTENTION: Do not use:

  •  electric heating devices to accelerate the thawing process;
  •  metal scrapers and sharp objects to remove ice and frost;
  •  chlorine-containing agents and acids when cleaning the freezer.

CLEARING
Keep the chest freezer and the door seal clean. Before washing, disconnect it from the power supply!

  1. Wash the chest freezer outside and inside with a clean cloth soaked in warm water with liquid detergent. Then wipe dry with a dry cloth.
  2. Do not use sharp metal scrapers, caustic and abrasive cleaners, as they can scratch the surfaces of the chest freezer.
  3.  Do not use a high-pressure cleaner or steam jet cleaners, as penetrating moisture can cause electric shock.
  4. After cleaning, check that the power cord is not damaged. Then insert the plug firmly into the wall outlet.

ATTENTION: Do not use abrasive substances, gasoline, benzene, solvents, hot water, metal, or coarse brushes, etc. for cleaning, as they can damage the surface of the freezer.

TROUBLESHOOTING

During operation, if any malfunctions are detected that the consumer cannot eliminate on their own, it is necessary to contact the service workshop for the repair of freezer equipment. But before contacting the repair service, read this section. This list includes the most common cases that are not the result of poor assembly quality or poor-quality materials used in this device.
ATTENTION: Before troubleshooting, you must disconnect the product from the mains. Troubleshooting that is not described in this manual should only be carried out by a qualified electrician or a competent technician.

Malfunction Possible cause Solution
__ The chest freezer does not work. The plug is not plugged in or not
fully plugged in. Plug the power cord plug into the wall outlet.
The fuse is blown or faulty. Check the fuse. Replace it if necessary.
The plug is faulty. The fault is fixed by an electrician.
The chest freezer is exceptionally cold. The temperature is set to very low.

Adjust the temperature to higher values.
Ineffective cooling.| The temperature is set incorrectly.| Set the desired temperature.
Chest lid had been open for too long| Do not leave the chest lid open for longer than necessary.
A large amount of warm food has been placed in the freezing chamber over the past 24 hours.| __ Set a lower temperature.
The chest freezer is located next to the heat source.| Please read the instructions for installing and placing the chest freezer again.
__ Bad smell from their freezer.| __ The food is not packaged correctly or is spoiled.| Check that the products are properly packaged and their aren’t expired. Remove spoiled food from the chamber.
The chest freezer door does not close.| The volume of food being loaded exceeds the usable volume of the freezer.| For the correct operation of the device, do not exceed the volume of the loaded products in excess of the useful volume of the chest.
__ The buildup of ice on the sealing strip.| The sealing tape is not airtight.| Heat the sealing tape with warm air, using a hair dryer to dry your hair. At the same time, straighten the tape with your hands, giving it the necessary shape to ensure tightness.
Uncharacteristic sounds.| The chest freezer is not installed correctly in height.| Adjust feets.
The chest freezer is close to the wall or other objects| Carefully remove the chest freezer compartment.
A part of the chest freezer, such as a tube, touches the wall or other parts of it.| If necessary, carefully bend the interfering part, observing all necessary safety measures.

ATTENTION: Troubleshooting that is not spelled out in this manual can only be carried out by a qualified specialist.
In case of malfunctions that are not specified in this manual, you should immediately contact an authorized service center, specifying the type of problem and the model of your chest freezer. Only original spare parts can be used for repairs. Unqualified repair removes the device from warranty service.
IMPORTANT: During the operation of the chest freezer, characteristic sounds may appear (compressor, refrigerant circulation). This is normal and is not a malfunction.

TRANSPORTATION

Do not expose the device to sudden temperature changes. A sudden change in temperature (for example, entering a warm room from the cold) can cause moisture to condense inside the device and disrupt its operation when turned on. The device must stand in a warm room for at least 6 hours before use.

  • During transport, the angle of inclination of the chest freezer should not exceed 45 degrees from the vertical.
  • Do not turn the chest freezer over, place it horizontally, or shake it. When moving the chest freezer, it should be held by the side walls or by the bottom, holding the door.
  •  Before operating the chest freezer, remove and properly dispose of all packaging materials.

ATTENTION: Do not allow children to play with the packaging material to avoid suffocation.

DISPOSAL

This chest freezer is designed and manufactured from high-quality materials and components that can be recycled and reused. This chest freezer contains components made of combustible material and cannot be disposed of with normal household waste. To prevent possible health and environmental hazards, the appliance must be disposed of as part of an approved electrical equipment disposal process. The product disposal procedure must be carried out in accordance with local environmental regulations. You can get more detailed information about the disposal, reuse, and disposal of the product from the authorized departments.
The main stages of recycling:

  1. Unplug the power cord from the wall outlet.
  2. Cut the power cable as close to the wall of the device as possible and utilize it separately.
  3.  Remove the lid of the chest by breaking the hinges so that children do not lock themselves or get electrocuted while playing.

SPECIFICATION / EQUIPMENT

Model BD(W)-250S BD(W)-310S BD(W)-365S BD(W)-435S
Total volume / Storage volume (L) 250 / 230 310 / 290 365 / 340 435 / 410
Energy efficiency class А А А А
Annual energy сonsumption (kW*h/year) 259 298 323 334
Climate class ST ST ST ST
Refrigerant R600a R600a R600a R600a
Power consumption (W) 125 140 150 155
Voltage (V) / Frequency (Hz) 220-240 / 50 220-240 / 50 220-240 / 50

220-240 / 50
Current strength (A)| 1,45| 1,45| 1,35| 1,55
Ambient temperature (°С)| from -15 to +38| from -15 to +38| from -15 to +38| from -15 to +38
Freezer temperature (°С)| from -14 to -24| from -14 to -24| from -14 to -24| from -14 to -24
Freezing capacity (kg / day)| 12| 17| 21| 29
Fast freeze mode (°С)| yes / -32| yes / -32| yes / -32| yes / -32
Keeping the temperature in case of power outage (h)*| 32| 38| 40| 42
Temperature control and regulation way| mechanical| mechanical| mechanical| mechanical
Defrosting system| defrost| defrost| defrost| defrost
Compressor type| hermetic| hermetic| hermetic| hermetic
Condenser location| internal| internal| internal| internal
Thermal insulation material| cyclopentane| cyclopentane| cyclopentane| cyclopentane
Noise level dB(A)| 40| 42| 44| 42
Color| silver| silver| silver| silver
Dimensions
Net / gross weight (kg)| 31 / 35| 34 / 38| 42 / 48| 50 / 53
Product dimensions (WxDxH) (mm)| 905х550х847| 954х616х845| 1120х700х845| 1300х700х845
Packing dimension (WxDxH) (mm)| 934х570х886| 990х640х885| 1156х748х885| 1336х748х885
Equipment
Chest freezer (pcs.)| 1| 1| 1| 1
Basket (pcs.)| 1| 2| 2| 2
Door handle| built-in| built-in| built-in| built-in
Ice scraper| yes| yes| yes| yes
Feets (pcs.)| 2 / 2| 2 / 2| 4| 4
Manual with warranty card (pcs.)| 1| 1| 1| 1
Packing (pcs.)| 1| 1| 1| 1

  •  This function means that if your chest freezer was disconnected from the network at a time when the temperature inside the freezer was maintained at -18 °С, then during the next time (see the data in the table) the temperature in the chest will rise to -4 °С (provided that the ambient temperature is not higher than 25 °C.

Model| BD(W)-250BL| BD(W)-310BL| BD(W)-365BL| BD(W)-435BL
---|---|---|---|---
Total volume / Storage volume (L)| 250 / 230| 310 / 290| 365 / 340| 435 / 410
Energy efficiency class| А+| А+| А+| А+
Annual energy сonsumption (kWh/year)| 215| 237| 283| 310
Climate class| ST| ST| ST| ST
Refrigerant| R600a| R600a| R600a| R600a
Power consumption (W)| 125| 140| 150| 155
Voltage (V) / Frequency (Hz)| 220-240 / 50| 220-240 / 50| 220-240 / 50| 220-240 / 50
Current strength (A)| 1,45| 1,45| 1,35| 1,55
Ambient temperature (°С)| from -15 to +38| from -15 to +38| from -15 to +38| from -15 to +38
Freezer temperature (°С)| from -14 to -22| from -14 to -22| from -14 to -22| from -14 to -22
Freezing capacity (kg / day)| 12| 17| 21| 29
Fast freeze mode (°С)| yes / -32| yes / -32| yes / -32| yes / -32
Keeping the temperature in case of power outage (h)
| 32| 38| 40| 42
Temperature control and regulation way| electronic display| electronic display| electronic display| electronic display
Defrosting system| defrost| defrost| defrost| defrost
Compressor type| hermetic| hermetic| hermetic| hermetic
Condenser location| internal| internal| internal| internal
Thermal insulation material| cyclopentane| cyclopentane| cyclopentane| cyclopentane
Noise level dB(A)| 40| 42| 42| 42
Color| white| white| white| white
Dimensions
Net / gross weight (kg)| 31 / 35| 34 / 38| 42 / 48| 50 / 53
Product dimensions (WxDxH) (mm)| 905х550х847| 954х616х845| 1120х700х845| 1300х700х845
Packing dimension (WxDxH) (mm)| 934х570х886| 990х640х885| 1156х748х885| 1336х748х885
Equipment
Chest freezer (pcs.)| 1| 1| 1| 1
Basket (pcs.)| 1| 2| 2| 2
Doorhandle| built-in| external| external| external
Ice scraper| yes| yes| yes| yes
Feets (pcs.)| 2 / 2| 2 / 2| 4| 4
Manual with warranty card (pcs.)| 1| 1| 1| 1
Packing (pcs.)| 1| 1| 1| 1

  •  This function means that if your chest freezer was disconnected from the network at a time when the temperature inside the freezer was maintained at -18 °С, then during the next time (see the data in the table) the temperature in the chest will rise to -4 °С (provided that the ambient temperature is not higher than 25 °C.

WARRANTY CARD

Date of sale
«» ____ 20___ y.
Store stamp
When selling, the seller is obligated to fill out the warranty coupons. The date of manufacturing and serial number can be found on the packaging and on the back side of the product. The manufacturer’s warranty obligations are valid only for the KRAFT chest freezer. The warranty period is 1 year from the date of purchase. The service life of the product conducted 5 years. Information about authorized service centers is available on the website http://kraftltd.com or by calling the support service toll-free +7(800)200-79-97. If you have any questions or problems related to KRAFT products, please contact in writing to the address: ZAO “LEBEDINSKIY TORGOVIY DOM”, str. Dnepropetrovskaya, 50 V, Rostov-on-Don, 344093, Russia, or by e-mail [email protected].

  1. The manufacturer guarantees free elimination of factory defects or technical faults during the warranty period if the Buyer complies with the terms and conditions of warranty service. All claims in appearance should be presented to the seller when purchasing the product. After purchasing the product, the consumer is responsible for all external damage.
  2.  The warranty applies only to products used for non-commercial personal, family or household purposes. Otherwise, the warranty period is 3 months from the date of purchase.
  3.  The seller reserves the right to conduct a technical examination of the product quality within the time frame established by law.
  4. Warranty repairs are not performed in the following cases:
    •  invalidity of the warranty card;
    •  the presence of damage and malfunctions resulting from improper use of equipment in violation of the rules of operation, installation or transportation of equipment by the user or a trading organization;
    •  the presence of damage and malfunctions resulting from the action of third parties or force majeure, ingress of foreign objects and insects, damage caused by animals;
    •  establishment of the fact of deviation from the State technical standards, supplying electrical and cable networks, supplying more power than provided by the manufacturer;
    • establishment of the fact of repair (attempt to repair) equipment independently or by unauthorized persons;
    • using of the product for industrial or commercial purposes.
  5.  The warranty card is invalid in the following cases:
    •  incorrect or incomplete filling of the card by the store and the master;
    •  absence of the sale date and the store stamp.
  6. The manufacturer is not responsible for damage caused to people, animals and premises due to violation of safety regulations, transportation and operation of the device.
  7. The warranty service does not cover installation, cleaning and maintenance of the device.

INSTALLATION CARD

KRAFT BDW-250S Chest Freezer 06The chest freezer is complete and operational. I have read the operating manual, rules of use and warranty obligations.
Owner ___
(signature, date)
KRAFT BDW-250S Chest Freezer 07
KRAFT BDW-250S Chest Freezer 08
KRAFT BDW-250S Chest Freezer 09

  • The manufacturer reserves the right to change designs, specifications, appearance, configuration of the product without impairing its consumer qualities, without prior notice to the customer.

All information provided in the manual concerning the configuration, technical characteristics, functions, and colors is purely informational in nature and under no circumstances is a public offer.

Manufacturer:
HOMA APPLIANCES CO., LTD
Аddress: North Shenghui Industry Zone, Nantou, Zhongshan, Guangdong, China.
Made in China

Importer:
ZAO LEBEDINSKIY TORGOVIY DOM
Address: No 50 V, Dnepropetrovskaya Str.,
Rostov-on-Don, PC 344093, Russia.
Tel.: +7(800) 200-79-97
WWW.KRAFTLTD.COM
Phone customer service
+7(800) 200-79-97

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

KRAFT User Manuals

Related Manuals