KRAFT KF-ORC457TSW OIL RADIATO User Manual

KRAFT KF-ORC457TSW OIL RADIATO

SAFETY INFORMATION

For your safety and proper use of the oil heater, please read this manual carefully before use, and keep it for re-reading after transporting or selling the instrument. Improper handling of the instrument may result in damage to the instrument, material damage or personal injury to the user.

• The device is intended for domestic use only. Forbidden – you can use the device outdoors.
• Use the device only in accordance with the instructions. Any use of the device for purposes not intended by the manufacturer is prohibited.
• This appliance is not intended for use by persons with disabilities. physical or mental capabilities (including children under 8 years of age), as well as persons who do not have sufficient knowledge and experience in its use, unless they are under the supervision of a person responsible for their safety. Children must not play with parts of the appliance. Usage, Maintenance and cleaning of the appliance must not be carried out by children without adult supervision.
• Connection of equipment to the network must be carried out in full compliance with the established rules and regulations in force in the country.
• Before connecting the appliance to the power supply, make sure that the voltage and mains frequency corresponds to those indicated on the product label.
• Connect the instrument only to an AC power outlet with a reliable mi contacts and grounding.
• Never use homemade fuses in the power supply circuit of the device. or fuses with incorrect ratings. Usage using metal or copper wires as a fuse may cause malfunction or fire.
• Do not connect the appliance to a timer or other device that automatically regulates the on/off of the appliance.
• It is not recommended to use an extension cord to connect the heater. If the use of an extension cord is necessary, then carefully follow the instructions supplied with the extension cord, without exceeding the power limit indicated on the extension cord.
• Do not unplug the power cord while the heater is in operation — first turn off the appliance using the power control knob.
• To avoid electrical overload, do not use the heater at the same time as other high power electrical appliances.
• When disconnecting the appliance from the mains, never pull on the power cord or the appliance itself, grasp only the power plug.
• Be sure to remove the plug from the power outlet when the heater is not used for a long time.
• Never pinch, cut, or extend the network cord. Damage to the power cord may result in electric shock, short circuit, or fire.
• When installing the appliance, ensure free access to the electrical outlet. Do not install the appliance in close proximity to a mains power outlet.
• Do not install the appliance closer than 100 cm from furniture, walls, curtains or other objects.
• This appliance is not designed for wall mounting. It should be placed on a flat, stable, heat-resistant surface.
• Use the device only in a vertical position.
• Do not block the ventilation openings of the heater. Don’t lean do not hang or stack things on the appliance. It may cause overheating appliance and start a fire. If the ventilation holes are clogged, clean them with a soft, damp cloth and a vacuum cleaner.
• Never insert foreign objects into the openings on the cabinet device. Doing so may result in injury, electrical shock, electric shock or damage to the device.
• Do not touch an operating heater to avoid burns. If you need to move the heater, grasp the handles, use oven mitts or let it cool down first.
• Do not leave the device in operation unattended. Before leaving move the mode switch to the off position and disconnect power cord plug.
• If it becomes necessary to use the appliance while sleeping, make sure that there are no items such as textiles, bed linen, etc., to avoid accidents.
• Do not use the heater on carpets.
• It is absolutely normal if the device crackles during operation.
• Do not place or use the device near flammable mixtures, sprays, explosive or flammable gases. There is a danger of ignition.
• Do not use the appliance near an open flame, stove or any other heating devices.
• The instrument is not intended for use in high humidity environments. and moisture condensation.
• Do not use the heater in the immediate vicinity of a bath, shower or a swimming pool so that it cannot fall into the water.
• Do not touch the device with wet hands.
• This heater is filled with a precise amount of special oil. Repairs that require opening the oil container may only be carried out by by the manufacturer or his authorized service organization, who must repair the appliance in the event of an oil leak. Follow the instructions for disposing of end-of-life oil. heater.
• The manufacturer is not responsible for the consequences of improper use of the device or non-observance of precautions and safety measures, or resulting from incorrect installation.
• Maintenance work on the equipment may only be carried out by qualified technical personnel. Otherwise, the responsibility for safety and compliance with the rules of installation, care and maintenance rests with the User.
• For repairs, only spare parts recommended by the manufacturer may be used.
• Although these instructions attempt to cover as many circumstances as may arise when using the appliance, in any case, care and common sense must be exercised, as when using any electrical appliance, especially in the presence of children.

DEVICE DESCRIPTION

• The device shown in the image is for guidance only and can be selected from your model.

ASSEMBLY INSTRUCTIONS

FASTENING OF ROLLER WHEELS.
The heater is packaged with the feet unattached. You must attach them before operating the heater.

1. Remove the casters and arch brackets from the packaging.
2. Insert one side of the arch brace into the groove on the caster bar.
3. Place the heater on a level, smooth and stable surface so that to prevent damage to the surface of the heater or floor coatings. Lift the heater with one side up so that you can slide the bar with wheels under it.
4. Move one pair of roller wheels with arched brace inserted under the heater, and throw the arched bracket over the jumper between the outer and next sections of the heater so that the other edge of the bracket enters into the hole on the bar with wheels.
5. Fix the roller bar securely by tightening the wing nut on the bracket.
6. In the same way, attach the second pair of roller wheels to the other side of the heater.

EXPLOITATION

1. Place the heater with the wheels down on a level, firm surface, resistant to high temperatures. Make sure 1 meter away there are no flammable or heat-resistant objects around the appliance. Using the heater in a position other than vertical may lead to dangerous situations.
2. Move the thermostat and power mode knobs to the minimum position, turning them counterclockwise. Then plug the power cord into a suitable electrical outlet. The power of the socket must correspond to the parameters indicated on the product label.
3. Set the desired power mode of the heating elements by turning power switch clockwise.
4. Turn the thermostat knob clockwise to the maximum position. The heater will turn on. When the room temperature reaches the desired level, slowly turn the thermostat knob counterclockwise Now the heater, periodically turning on and off, will maintain a constant temperature in the room. To change the room temperature, turn the thermostat knob to clockwise to increase the temperature, or counterclockwise to to downgrade. The heater will automatically maintain the temperature in the room in accordance with the thermostat settings, cycling on and off. turning off.
5. To turn off the appliance, turn the thermostat and power mode knobs to minimum position. The indicator should turn off.
6. Disconnect the heater from the mains by unplugging the power cord from the socket when not in use.

CLEANING AND STORAGE

• An electric heater requires regular maintenance. At least once every 10 days, the device should be cleaned.
• Before cleaning, turn the mode switch to position 0 (OFF), unplug the power cord from the mains, and allow the appliance to cool completely.
• Use a damp cloth for cleaning. Before each subsequent use, make sure that the heater is fully assembled and in good working order.
• Do not touch the hot surfaces of the appliance. If you need to move the heater, grab the handle or use oven mitts.
• Wipe the outer surface of the heater with a soft damp cloth

ATTENTION! Do not allow water or other liquids to come into contact with organs control and inside the unit, it may result in electric shock and/or fire. Do not use solvents or abrasives for cleaning as they may damage the surface of the instrument. When the device is not in use, store it in a clean and dry place.

DISPOSAL

Before disposal, the washing machine should be completely unusable for safety reasons. Remove the plug of the power cable from the wall outlet, cut the power cable as close to the wall of the device as possible, and remove the door so that children do not lock themselves or get an electric shock while playing. The appliance cannot be disposed of together with ordinary household waste. To prevent possible health and environmental hazards, the device must be disposed of as part of an approved disposal process. In the future, you should act in accordance with local regulations regarding the disposal of waste and garbage.

SPECIFICATION / CONFIGURATION

Dimensions
Net / gross weight (kg)| 8,1/9,0| 9,8/10,7| 11,7/12,7
Product dimensions, WхHхH (mm)| 380х250х640| 460х250х640| 540х250х640
Packing dimensions, WхDхH (mm)| 430x160x655| 510x160x655| 590x160x655
Equipment
Oil heater (piece)| 1| 1| 1
Instruction manual with warranty card (pc.)| 1| 1| 1
Package (pc.)| 1| 1| 1

WARRANTY CARD

The manufacturer’s warranty obligations are valid only for the KRAFT oil radiator. The warranty period is 1 year from the date of purchase. The service life of the product conducted 3 years. Information about authorized service centers is available on the website http://kraftltd.com or by calling the support service toll-free +7(800)200-79-97. If you have any questions or problems related to KRAFT products, please contact in writing to the address: ZAO “LEBEDINSKY TORGOVIY DOM”, str. Dnepropetrovskaya, 50 V, Rostov-on-Don, 344093, Russia, or by e-mail [email protected].

1. The manufacturer guarantees free elimination of factory defects or technical faults during the warranty period if the Buyer complies with the terms and conditions of warranty service. All claims in appearance should be presented to the seller when purchasing the product. After purchasing the product, the consumer is responsible for all external damage.
2. The warranty applies only to products used for non-commercial personal, family or household purposes. Otherwise, the warranty period is 3 months from the date of purchase.
3. The seller reserves the right to conduct a technical examination of the product quality within the time frame established by law.
4. Warranty repairs are not performed in the following cases:
5. the invalidity of the warranty card;
6. the presence of damage and malfunctions resulting from improper use of equipment in violation of the rules of operation, installation or transportation of equipment by the user or a trading organization;
7. the presence of damage and malfunctions resulting from the action of third parties or force majeure, ingress of foreign objects and insects, damage caused by animals;
8. establishment of the fact of deviation from the State technical standards, supplying electrical and cable networks, and supplying more power than provided by the manufacturer;
9. establishment of the fact of repair (attempt to repair) equipment independently or by unauthorized persons;
10. using of the product for industrial or commercial purposes.
11. The warranty card is invalid in the following cases:
    • incorrect or incomplete filling of the card by the store and the master;
    • absence of the sale date and the store stamp.
12. The manufacturer is not responsible for damage caused to people, animals and premises due to violation of safety regulations, transportation and operation of the device.
13. The warranty service does not cover installation, cleaning and maintenance of the device.

The manufacturer reserves the right to change designs, specifications, appearance, and configuration of the product without impairing its consumer qualities, without prior notice to the customer. All information provided in the manual concerning the configuration, technical characteristics, functions, and colors is purely informational in nature and under no circumstances is a public offer.

Manufacturer:
NINGBO CHANGER ELECTRON CO.,
LTD.
Address: 373, Xinxin Road, Cixi City,
Ningbo, Zhejiang prov., China

Importer:
ООО SARMAT.
Address: No 50 V, Dnepropetrovskaya
Str. Apt. 2, Rostov-on-Don, Russia, PC
344093
Tel.: +7 800 200 79 97

References

• KRAFT - Бытовая техника
• KRAFT - Бытовая техника

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>