KRAFT KF-UME7202W Automatic Washing Machine User Manual

AUTOMATIC WASHING MACHINE USER GUIDE
KF-UME5201W KF-UME6201W KF-UME7202W

KF-UME7202W Automatic Washing Machine

DEAR BUYER!
Congratulations on your purchase of a washing machine KRAFT.
We are sure that it will provide excellent quality of washing and will become your reliable assistant in the household. Please read these instructions carefully before using them.
If you encounter any problems in the process of using this washing machine, please contact us.
Thank you for your purchase!
Do not expose the device to sudden temperature changes. Extreme changes in temperature (for example, entering from the cold outside into a warm room) this may cause moisture  to condense inside the device and disrupt its operation when switched on. After storing the washing machine at low temperatures or after transporting it in winter conditions, you can turn it on no earlier than after 6 hours of staying at room temperature in unpacked form.

SAFETY INFORMATION

For your safety and proper use of the washing machine, please read these instructions carefully before using them, and save them for rereading after transporting or selling the appliance. Improper handling of the device may cause damage to the device, cause material damage, or cause damage to the user health.
ATTENTION! To avoid serious injury and damage to the device, observe the safety requirements. Using the washing machine for other purposes, violating the rules of installation, operation, cleaning, and safety measures, as well as non-compliance with temperature conditions, deprives you of the right to warranty service.

• The device is intended for use only in domestic conditions and only for its intended purpose. When removing the device from its packaging, make sure that it is intact and not damaged. Keep the packaging materials away from children. Dispose of the packaging properly.

• This appliance is not intended for use by persons with reduced physical or mental capabilities (including children under 8 years of age), or by persons who do not have sufficient knowledge and experience in its use, unless they are under the supervision of a person responsible for their safety. Children should not play with the elements of the device. The appliance must not be serviced or cleaned by children without adult supervision.

• Children can only use the machine under adult supervision. When the machine is not in use, make sure that children do not climb inside and lock themselves from the inside by slamming the door.

• Before the first (and each subsequent) switch-on, check the device for damage and whether the technical specifications indicated on the product correspond to the power supply parameters.

• If the appliance or the power cord is damaged in any way, do not connect it to the mains. Report the damage to the store where the product was purchased, contact the service center for examination and repair. Do not attempt to repair it yourself. In this case, do not throw away the packaging.

• It is not safe to disassemble, repair, or make any changes to the washing machine. Any damage to the electrical wiring of the appliance can cause an electric shock, fire, or short circuit. In the event of a malfunction, you should immediately contact an authorized service center, specifying the type of problem and the model of your freezer. Only original spare parts can be used for repairs. Unqualified repair removes the device from warranty service.
  RISK OF ELECTRIC SHOCK

• Do not plug the power cord into the wall outlet until the appliance has been installed. Make sure that the power plug is easily accessible. Do not touch the power cable plug with wet hands. Wipe the plug dry, clean it from dust and carefully insert it into the outlet. Dust, water, or weak contact can cause fire or electric shock.

• The freezer must be disconnected from the power supply when moving, servicing, or repairing. To disconnect, hold on to the power plug, and do not pull or pull the power cord.

• Do not use the washing machine with a damaged power cord, outlet, or water inlet and drain hoses.

• Do not twist, bend, or extend the power cord. Do not place heavy objects on it. Make sure that the cord does not touch sharp edges or hot surfaces.

• Do not use the washing machine outdoors, do not expose it to rain, moisture, direct sunlight, and other atmospheric phenomena, as well as in rooms with high humidity at ambient temperatures below 0°C. Do not place the appliance on a wet surface.

• Do not allow water or any liquids to enter any part of the appliance. Never touch the washing machine, power cord, or power outlet with wet hands. Avoid contact of wet laundry with the control panel.

• To disconnect the washing machine from the power supply, do not pull the power cord, hold the plug, pull, or pull it out with force.

• Do not use the washing machine if it has been flooded. Make sure that the drain hose is properly connected before washing. Do not approach the machine during washing if you find a water leak.

ATTENTION! To avoid overloading the network, do not use other high-power appliances in the same circuit.
RISK OF FIRE AND EXPLOSION

• Do not install the washing machine on the carpet (because the installation area should be flat and hard-coated), as well as near heat sources, avoid contact with other electrical appliances and heating objects, open sources of fire.
• If you smell burning wiring or hear an unusual noise when the machine is running, immediately stop the washing process, turn it off and contact the service center.
• Use a separate outlet to connect the washing machine. Using the same outlet for multiple appliances may cause a fire.
• Make sure that the power cord plug is not damaged or deformed. A faulty plug can overheat and cause a fire. Do not use adapters, extension cords, or «T-pieces» to connect the appliance.
• Do not wash clothing with flammable solvents, gasoline, or other substances.
• Stains from petroleum products may not be completely washed off, and their chemical interaction with detergents can lead to a fire.
• Do not mix chlorine bleach with ammonia or acids (vinegar, rust removers), as this may produce toxic gases that are life-threatening.
• Do not use the washing machine if there is a gas leak, or in an environment of methane or other explosive gases.
• Use detergents with low foam formation, which do not contain phosphates, this improves the quality of rinsing and helps to preserve the environment.

**ATTENTION! Violations of the above rules may result in a fire or explosion.
RISK OF BURN**

• Do not touch the door of the washing machine during the washing process, as the glass of the door can get very hot.
• The water drained after washing at high temperature can be very hot, be careful to avoid contact with the water drain hose.
• If you need to open the door while washing at high temperatures, do so after the water has drained.
• Do not open the door, touch the drum, or remove the laundry until the drum has stopped completely. Do not put your hands under the machine while using it.

**ATTENTION! Violations of the above rules may result in burns or injuries.
RISK OF DAMAGE**

• The machine should only be used for household purposes for washing clothes. It is not recommended to use the washing machine on river and sea vessels.
• Safety precautions must be observed when moving the washing machine. It must be moved by at least 2 people and in no case by the door, because the hinges are not designed for the weight of the car and can break. Install the washing machine on a flat, hard, dry surface to prevent it from falling and avoid injury or death.
• Do not attempt to use the washing machine with the door open, damage the locking contact (door latch), or insert anything into the opening of the locking contact.
• Do not place heavy items or objects on the washing machine or use it as a countertop for anything.
• Only use the water filling and draining hoses that are included with the appliance (do not use old hoses).
• If you have a pet, carefully monitor the integrity of the water hoses and power cords.
• Before washing, make sure that all items from the pockets of the clothes are removed (for example, coins, pins, hooks, etc.).
• Do not wash curtains or waterproof clothing (such as raincoats, shower curtains, sleeping bags), as only machine-washable clothing can be washed.
• Tablecloths and products without treated edges should be washed in special laundry bags, as the materials may be damaged.
• Do not allow greases and oils to get on the body and plastic parts of the device to avoid their damage. Do not heat the plastic parts.
• Keep the washing machine and the door seal clean. Do not use sharp metal scrapers, caustic and abrasive cleaning agents, as they can scratch the surfaces of the machine.

ATTENTION! Violations of the above rules can lead to injuries, damage to the washing machine or laundry.

DEVICE DESCRIPTION

*The device shown in the figure is for informational purposes only and may differ from your model.
ATTENTION! When unpacking the washing machine, check for any damage received during transport, and make sure that all the accessories are in stock. If the washing machine has only one water inlet valve, the hot water inlet hose is not included.

ATTENTION! During the first use, it is possible to pump out a small amount of water, this is not a manufacturing defect, since the water may remain after several tests performed by the manufacturer.
INSTALLATION AND CONNECTION
REMOVING THE TRANSPORT BOLTS
ATTENTION! Before using the washing machine, the transport bolts must be removed.

Follow these steps to remove the bolts:

1. Loosen the four transport bolts with a wrench.
2. Grasp the head of the bolt and pull it through the hole. Repeat this action for each bolt.
3. Close the holes with the supplied plastic plugs.
4. Save the transport bolts for use during possible transport of the machine.

ADJUSTING THE LEVEL OF THE WASHING MACHINE
To eliminate vibration, set the washing machine level. If necessary, adjust the height of the legs to compensate for the unevenness of the floor by tilting it slightly and turning the legs.

1. Check for the feet on the washing machine. Place the machine on a level strictly horizontally on a flat and solid floor.
2. Adjust the position by unscrewing / screwing the legs.
3. Press the opposite corners of the washing machine from the top, make sure that the washing machine is stable on the surface.

ATTENTION! Do not install the washing machine outdoors or in places with temperatures below 0°C.

• The legs should be in the lowest possible position (it is not recommended to twist them to the maximum height).
• The washing machine must stand steadily on a flat, hard floor to minimize vibration, noise and possible movement of the machine during operation.
• When installing, make sure that there is sufficient space (on all sides) for ventilation of the washing machine.

CONNECTING THE WATER INLET HOSE

1. Connect the hose to the water supply and secure it by screwing on the cold water tap (outlet).
2. Connect the other end of the water supply hose to the inlet valve on the back of the washing machine and secure the hose by twisting it clockwise.

• If there is one inlet valve on the back of the washing machine, it must be connected to a cold water source.
• If there are two intake valves, they are connected to the cold and hot water supply sources.

ATTENTION! Do not bend the hose. Check the connection of the water inlet hose every time before using the washing machine.
CONNECTING THE WATER DRAIN HOSE

• The drain hose must be located at a height of 65-100 cm above the floor level, otherwise it may lead to poor slow draining.
• Use the drain hose bracket (not included) for mounting. Make sure that all hose connections are sealed.

ATTENTION! The end of the drain hose must not be submerged in water,
otherwise it may malfunction.
CONNECTION TO THE POWER SUPPLY NETWORK
This appliance is equipped with a grounded plug installed on the power cord. Therefore, it must be connected to an appropriate electrical outlet to protect against short circuits. The installation, connection and grounding of the electrical system must comply with the provisions of European standards, as well as applicable local regulations. The ground cable must not be interrupted by the switch. If your apartment does not have a ground connection, contact a qualified electrician to install it.
ATTENTION! The power outlet should be freely accessible, and the washing machine should be easily connected to the power grid.

• The maximum current when using the washing machine is 10 A, make sure that the power supply system (current, voltage and wiring) in your home can meet the requirements of a working washing machine. Make sure that the mains supply voltage corresponds to the rated voltage of the machine (220V).
• Connect the washing machine to an outlet that is properly grounded. In the event of a short circuit, grounding can reduce the risk of electric shock. The power plug must match the power outlet.
• Do not plug in or pull out the plug with wet hands.
• When pulling out the plug, always hold it, carefully removing it from the socket. Do not pull the power cord.
• If the power cord is damaged, it must be replaced at a service center.

OPERATION

BEFORE ENABLING

• The washing machine is intended for domestic use only and only machine-washable fabrics can be washed in it. The washing machine is not designed for washing carpets.
• Your washing machine can only be connected to cold water. Choose a household washing powder with a low degree of foam formation, suitable only for machine washing.
• The water and power supply must be stopped after washing is finished.
• Environmental conditions for the operation of the washing machine:
  1. Ambient temperature 5-40°C.
  2. Relative humidity less than 95% (at 25°C).

BEFORE WASHING

• Do not exceed the laundry load limit for the selected program.
• Remove all foreign objects from clothing, such as coins, etc., to prevent damage to clothing and the machine.
• Place small items (handkerchiefs, gloves, socks, etc.) in a mesh laundry bag.
• Load large and small items in the proper proportion.
• When closing the door, do not clamp the clothing between it and the O-ring.
• Sort the clothing according to the information provided by the manufacturer, such as the type of fabric, washing temperature, etc., indicated on the clothing label.

DETERGENT LOADING

• Before washing, add the required amount of detergent (in the form of powder, liquid, etc.) to the detergent container and close it.
• When using liquid detergents, make sure that the amount is sufficient for washing.

Compartment for detergent when using the «Pre-wash» program.
The main compartment for bulk or liquid detergents.
Compartment for clothing care products.

STARTING THE WASHING MACHINE

1. Connect water supply hose and turn on the tap
2. Insert the plug into the socket
3. Connect the drain hose to the sewerage system
4. Open the lid of the washing machine. Open the drum, load the laundry into the drum, and then close it tightly. Make sure that the clothes are not clamped by the drum doors. Place the laundry detergent in the detergent compartment. Close the lid of the washing machine.
5. Select the desired washing program, temperature and spin speed.
6. Press the button Start / Pause

DESCRIPTION OF THE CONTROL PANEL

Note! The chart is for reference only, Please refer to real product as standard.

1. Programmer — allows user to select the washing program depending on the degree of contamination, the type of fabrics and the number of loaded items, which ensures
   high quality washing and more efficient operation of the device. After switching on, the parameters of the selected program cannot be changed by switching the programmer handle to a different position.

2. «Start/Pause» button — pressing the button starts or pauses the program execution.

3. «Spin» button — allows you to change the spin speed in the selected program.
   Attention: the spin speed cannot be changed when selecting the «Auto-cleaning» program!

4. «Delayed start» button — using this function, you can set the start time of washing.

5. «Functions» button-allows you to add a pre-wash cycle or an additional rinse cycle to the washing program (for washing out detergent residues). When using these functions, the duration of the program increases. The corresponding indicator will light up.

ATTENTION! Your washing machine has a PTG door lock (electric lock with a lock block), wait for 2-3 minutes, wait for the lock to unlock, and only then open the door! It is strictly forbidden to tear off the door with the use of force!
WASHING PROGRAMS

• Quick wash 15’— extra short programme approx, suitable for lightly soiled washing as a small amounts of laundry.

• Daily wash 45’— Washing few and not very dirty clothes quickly.

• Mix — wash for mixed fabrics with low contamination.

• Jeans — specially for jeans.

• Delicate — for delicate, washable textiles, e.g. made of silk, satin, synthetic fibres or blended fabrics.

• Spin — program for extraction. Starts draining the water from the tank of the washing machine, followed by pressing.

• Gargle + Spin — the program is used if you want to rinse the laundry separately and then spin it at the recommended default speed.

• Hygiene 90 °C iis a program to achieve the maximum disinfecting effect with the help of temperature exposure.

• ECO 40-60 — is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together in the same cycle. This programme is used to assess the compliance with the regulation (EU) 2019/2023.

• Cotton cold, 30°C, 40°C, 60°C — wash at temperatures from 0°C to 60°C. The most high-quality washing due to the use of different modes of movement of the drum. For washing white and colored cotton and cotton fabrics (bed linen, pajamas, shirts, underwear, etc.). The temperature regime should be chosen depending on the degree of contamination of the linen. The greater the contamination, the higher the temperature should be selected.

• Each washing program can be changed. You can independently set the temperature and spin speed for the programs.

• The program execution time is indicated approximately. The actual program execution time may be shorter / longer depending on the washing conditions (water pressure, amount of laundry, etc.).
  ADDITIONAL FUNCTIONS
  «Protection from children»
  Function is used to enable a special button lock that protects children from accidentally changing the settings. All buttons except «On/Off» will be locked.
  To turn on the child protection, hold the «Function» and «Delayed Start» buttons for 3 seconds to lock the control buttons, the corresponding indicator will light up. To cancel the function, press and hold the same buttons again for 3 seconds.
  Attention! The lock does not turn off automatically after the end of the washing cycle!
  Delayed start
  The program allows you to postpone the start of washing and set it at the hours when it is most convenient for you. To activate the function:

  1. Set the programmer knob to the desired program (see the program table).
  2. Select additional functions as desired or change the washing parameters.
  3. By pressing the «Delayed Start» button, select the time setting 3h/6h/9h
  4. Click on the «Start» button/Pause.» The washing machine will switch to standby mode. Washing will start automatically after the programmed delay time has elapsed.

Washing Programmes Table

Program| LoadKF-ME6201W/
KF-UME7202W/
KF-UME5201W(kg)| Temperature(°c)| Defaultspeed
(rpm)| Default time (min)| Waterconsumption 0)| Option
---|---|---|---|---|---|---
Delay| Extra rinse| Pre wash
Cotton| 5/6 /7| cold| 800| 2:20| 58| yes| yes| yes
Cotton 30| 5/6 /7| 30| 800| 2:30| 58| yes| yes| yes
Cotton 40| 5/6 /7| 40| 800| 2:40| 58| yes| yes| yes
Cotton 60| 5/6 /7| 60| 800| 2:45| 58| yes| yes| yes
Hygiene 90| 2,5 /3 /3,5| 90| 800| 2:36| 37| yes| yes| yes
Delicate| 3/3,5| 20| 600| 0:49| 32| yes| yes| yes
ECO 40-60| 5/6 /7| 34| 1000| 3:18| 50| yes| —| —
2,5/3 /3,5| 31| 1000| 2:36| 39| yes| —| —
1,5| 26| 1000| 2:36| 36| yes| —| —
Spin only| 5/6/7| —| 800| 0:12| —| yes| —| —
Rinse & Spin| 5/6/7| —| 800| 0:20| 23| yes| yes| —
Jeans| 5/6 /7| 60| 800| 1:45| 58| yes| yes| yes
Mix 60| 5/6 /7| 60| 800| 1:30| 58| yes| yes| yes
Mix 40| 5/6 /7| 40| 800| 1:20| 58| yes| yes| yes
20| 3/3/4| 20| 800| 1:01| 38| yes| yes| —
Rapid 45| 2/2/3| 40| 800| 0:45| 32| yes| yes| yes
Quick 15′| 2/2/2,5| cold| 800| 0:15| 32| yes| —| —

Pre-wash
An additional «Soaking» cycle before starting the main washing program. Use this function to wash heavily soiled laundry.
Additional rinsing
An additional rinsing cycle for washing out detergent residues. Use this function if you think that you need to rinse the laundry again (for example, if too much detergent has been used). The cycle can be repeated several times.
Memory function. In case of a power outage, the washing machine remembers at what stage of washing the shutdown occurred, and when the power supply is restored, it will continue washing from the moment of stopping.
Protection

• During the spin, the clothes may be distributed in the drum in an undesirable way.
  The machine is equipped with the function of automatic redistribution of laundry, which is produced during the spin, after which the spin program continues.

• If the clothes are not distributed in the necessary way after performing the automatic function of redistributing (shaking) the laundry, then in order to prevent increased vibration of the washing machine, the discharge speed will be reduced.

• When the load of laundry into the machine is insignificant (less than 1 kg), the spin mode can be automatically canceled. Due to the small amount of laundry, excessive vibration may occur when pressing at high speeds, which it may cause the machine to break down.

• The need to redistribute (shake) the laundry increases the duration of the washing program.

**ATTENTION!** Make sure that the clothes are not trapped between the drum doors and the lid of the washing machine. Use the appropriate type of detergent for different washing temperatures to get the best effect with the least consumption of water and electricity.

CLEANING AND SERVICE

Keep the washing machine and the door seal clean. Before washing, disconnect it from the power supply!

1. The outside of the washing machine body can be wiped with a clean cloth soaked in warm water with liquid detergent. Then wipe dry with a dry cloth.
2. Do not use sharp metal scrapers, caustic and abrasive cleaning agents, as they can scratch the surfaces.
3. Do not use a high-pressure cleaner or steam jet cleaners, as penetrating moisture can cause electric shock.
4. After cleaning, check that the power cord is not damaged. Then insert the plug firmly into the wall outlet.

ATTENTION! Do not use abrasive substances, gasoline, benzene, solvents, hydrochloride, hot water, metal, or coarse brushes, etc.for cleaning, as they can damage the surface of the washing machine.
DRUM CLEANING

1. Open the washing machine door to dry the drum.
2. If rust has formed in the drum, remove it in a timely manner with a chlorine-free product.

CLEANING THE DETERGENT CONTAINER

1. Pull out the detergent container by pressing the A button.
2. Rinse the detergent container with water or wipe it with a damp cloth.
3. After washing, wipe the container dry and put it back in place.
4. Leave the washing machine lid open for natural drying.

ATTENTION! Do not rinse the detergent container that has not been removed with water. Before starting the washing machine, make sure that the detergent container is properly closed.
WATER DRAIN FILTER CLEANING
ATTENTION! To avoid getting burned, wait until the water left in the washing machine cools down! The water tap must be turned off!

Clean the water drain and fill filter every 6 months:

1. Open the filter cover.
2. Unscrew the filter, drain the remaining water, and remove all foreign objects from the drain pump filter.
3. Put the filter back on.

WATER SUPPLY FILTERS CLEANING

• Turn off the tap, disconnect the hose from the tap, and clean the filter screen with a small brush.
• Disconnect the water supply hose from the washing machine, pull out the filter screen with pliers, and install it back after cleaning.
• Connect the filling hose, open the tap, and make sure there is no water leakage.

TECHNICAL MAINTENANCE
All electronic components (plug, electric cord, compressor, etc.) must only be reinstalled in certified service centers by qualified personnel.
In the event of a malfunction, you should always contact an authorized service center, specifying the type of problem and the model of your washing machine. Unqualified repair removes the device from warranty service. Only original spare parts can be used to repair the device.

TROUBLESHOOTING

During operation, if any malfunctions are detected that the consumer cannot eliminate on their own, it is necessary to contact the service center for the repair of washing machines. But before contacting the repair service, read this section. This list includes the most common cases that are not the result of poor assembly quality or  oor-quality materials used in this device.
ATTENTION! Before troubleshooting, you must disconnect the product from the mains. Troubleshooting that is not described in this manual should only be carried out by a qualified electrician or a competent technician.

program, then press the Start/Pause button. Straighten the water supply hose.
Washing machine does not work.| Open the tap until it stops. Clean the filter on the water supply hose. Close the washing machine door.
The loading hatch does not open after washing.| The hatch lock locking system is enabled. Disconnect the washing machine from the power supply.
The water does not heat up.| Make sure that the cold-water wash mode is not selected.
The heating element is damaged. Contact the service center.
Water under the washing machine.| Check the connection of the water supply hose.
The indicators are not highlighted.| Power supply is disrupted. Check the power connection.
The control board is damaged. Contact the service center.
Bad / weak spin.| Dose detergent according to the degree of soiling and water hardness (see recommendations on the detergent pack). Clean the pump filter.
The washing machine does not spin.| Remove and re-load the items into the drum, clean the pump.
Washing machine does not collect water.| 1.Open the pump filter.
2.Check the water pressure. a Reconnect the water supply hose.
44. Close the washing machine door.
5. Check and make sure that the hose is not twisted or pinched.
Washing machine draws and drains water at the same time.| Check and make sure that the end of the drain hose is located above 100-125 cm from the floor level.
The door lock is faulty.| Check that the clothes are not stuck between the drum and the door. Remove the interference. Close the door tightly. Contact the service center if necessary.
The heating element is faulty.| Close the water tap, disconnect the machine from electricity and water supply. Contact the service center.
Water overflows.
The drum does not rotate.
Vibration in the washing machine.| Check and make sure that all the transport bolts are removed.
Adjust the position of the washing machine level in different planes.
There is a large amount of foam through the compartments for washing powder.| Reduce the dose of detergent.
Check the water hardness, as well as the amount and type of detergent used.
Interrupting the washing process until the end of the program.| Check the supply voltage, water supply, and water drain.
Check the supply voltage, water supply, and water drain.| The washing machine is equipped with an automatic water top-up system.
The suspension is caused by the removal of excess foam.

ATTENTION! Troubleshooting that is not spelled out in this manual can only be carried out by a qualified specialist.
In case of malfunctions that are not specified in this manual, you should immediately contact an authorized service center, specifying the type of problem and the model of your washing machine. Only original spare parts can be used for repairs. Unqualified repair removes the device from warranty service.
SELF-DIAGNOSIS
The washing machine has an internal diagnostic system, which, in case of minor malfunctions associated with improper operation, helps to determine their causes.

closed.
| Water injecting problem while
washing| Tap is not opened or water flows too slowly. Inlet valve filter is blocked. Inlet pipe is twisted. If water is not supplied.| Open the tap or wait till the water supply becomes normal. Check inlet valve filter. Straighten the water pipe. Check the other taps
in the room.
| Drain problem while washing| Outlet hose is blocked or twisted. Drain pump is blocked| Wash and straighten outlet hose. Wash drain
pump filter
| The water level in drum exceed a
certain level for alarm| Water overflow| Restart the washer
Please call up service line if there are still troubles.
Please try again first, call up service line if there are still troubles

Light flash Light off
ATTENTION! If the error persists, contact an authorized service center.

DISPOSAL

Before disposal, the washing machine should be completely unusable for safety reasons. Remove the plug of the power cable from the wall outlet, cut the power cable as close to the wall of the device as possible, and remove the door so that children do not lock themselves or get an electric shock while playing. The  ppliance cannot be disposed of together with ordinary household waste.
To prevent possible health  and environmental hazards, the device must be disposed of as part of an AP- proved disposal process. In the future, you should act in accordance  with local regular- tions regarding the disposal of waste and garbage.

SPECIFICATION / CONFIGURATION

64 / 80
Power cord length (m)| 1,5| 1,5| 1,5
Water inlet hose length/ outlet hose length (m)| 1| 1| 1
Volume of the inner tub (L)| 45,9| 47,9| 49,9
Volume of inner tub (L)| 220×240| 220×240| 220×240
Color| white| white| white
Base washing programs|
Number of programs| 15
List of programs| Cotton Cold; Cotton 30°C; Cotton 40°C; Cotton 60°C; Delicate; ECO 40-60; Spin Only; Gargle & Spin; Auto Cleaning; Jeans, Mix 60°C; Mix 40°C; 20°C; Daily 45′; Quick 15′
Additional functions|
Pre-wash| yes| yes| yes
Additional rinsing| yes| yes| yes
Delayed start| yes| yes| yes
Pause in operation for additional loading of laundry| yes| yes| yes
Protection from children| yes| yes| yes
Disabling the audio signal| –| –| –
Auto-cleaning| –| –| –
Autobalance /anti-foam| yes| yes| yes
Overheating / overflow control| yes| yes| yes
Dimension|
Net / gross weight (kg)| 56 / 60| 56 / 60| 56 / 60
Product dimensions (WxDxH) (mm)| 400x610x875| 400x610x875| 400x610x875
Packing dimension (WxDxH) (mm)| 490x690x895| 490x690x895| 490x690x895
Equipment
Washing machine (pcs.)| 1| 1| 1
Inlet pipe (pcs.)| 1| 1| 1
Plugs (set of)| 1| 1| 1
Manual with warranty card (pcs.)| 1| 1| 1
Packing (pcs.)| 1| 1| 1

INSTALLATION CARD
Automatic washing machine is installed in the city _
str. ___, №_, apt. ____connected by a mechanic___
(name of company)___
Mechanic __ (signature, date)
T he hawing machine is complete and operational .
I have read the operating manual, rules of use and warranty obligations.
Owner ____(signature, date)

WARRANTY CARD

Date of sale
«» ____ 20___ y.
Store stamp
When selling, the seller is obligated to fill out the warranty coupons. The date of manufacturing and serial number can be found on the packaging and on the back side of the product.
The manufacturer’s warranty obligations are valid only for the KRAFT automatic washing machine. The warranty period is 1 year from the date of purchase. The service life of the product conducted 5 years.
Information about authorized service centers is available on the website http://kraftltd.com or by calling the support service toll-free +7(800)200-79-97. If you have any questions or problems related to KRAFT products, please contact in writing to the address: ZAO “LEBEDINSKY TORGOVIY DOM”, str. Dnepropetrovskaya, 50 V, Rostov-on-Don, 344093, Russia, or by e-mail [email protected].

1. The manufacturer guarantees free elimination of factory defects or technical faults during the warranty period if the Buyer complies with the terms and conditions of warranty service. All claims in appearance should be presented to the seller when purchasing the product. After purchasing the product, the consumer is responsible for all external damage.

2. The warranty applies only to products used for non-commercial personal, family or household purposes. Otherwise, the warranty period is 3 months from the date of purchase.

3. The seller reserves the right to conduct a technical examination of the product quality within the time frame established by law.

4. Warranty repairs are not performed in the following cases:
   – invalidity of the warranty card;
   – the presence of damage and malfunctions resulting from improper use of equipment in violation of the rules of operation, installation or transportation of equipment by the user or a trading organization;
   – the presence of damage and malfunctions resulting from the action of third parties or force majeure, ingress of foreign objects and insects, damage caused by animals;
   – establishment of the fact of deviation from the State technical standards, supplying electrical and cable networks, supplying more power than provided by the manufacturer;
   – establishment of the fact of repair (attempt to repair) equipment independently or by unauthorized persons;
   – using of the product for industrial or commercial purposes.

5. The warranty card is invalid in the following cases:
   – incorrect or incomplete filling of the card by the store and the master;
   – absence of the sale date and the store stamp.

6. The manufacturer is not responsible for damage caused to people, animals and premises due to violation of safety regulations, transportation and operation of the device.

7. The warranty service does not cover installation, cleaning and maintenance of the device.

Manufacturer:
WUXI LITTLE SWAN ELECTRIC CO., LTD
Address: No.18 South Changjiang Road, New District, Wuxi,
Jiangsu, China.
Importer:
SARMAT LLC.
Address: No 50 V, Dnepropetrovskaya Str., Apt. 2,
Rostov-on-Don, PC 344093, Russia.
Tel.: + 7 (800) 200-79-97

WWW.KRAFTLTD.COM Phone customer service+7(800) 200-79-97

Documents / Resources

| KRAFT KF-UME7202W Automatic Washing Machine [pdf] User Manual
KF-UME7202W Automatic Washing Machine, KF-UME7202W, Automatic Washing Machine, Washing Machine, Machine, KF-UME6201W, KF-UME7202W
---|---

References

• KRAFT - Бытовая техника
• KRAFT - Бытовая техника

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>