Lifestyle CA-SGB07 8kW Gas Boiling Ring User Manual

Lifestyle CA-SGB07 8kW Gas Boiling Ring

Warning

This Lifestyle product is for outdoor use only.
Read the instructions before using the appliance and retain for future reference.

These instructions give some important information about the installation, usage and the maintenance of this appliance. Please take time to read these instructions so that you can safely enjoy the and make the most of your Lifestyle gas boiling ring.

WARNING

• Lifestyle Appliances declines any responsibility connected to the wrongful installation or use of this appliance.
• Before installing and using this product, please read the instructions provided carefully. If you do not follow these instructions for installation and use, you may risk accidents or deterioration in the condition of this appliance.
• Before opening the appliance for repairing or cleaning, please switch off and make sure all parts are cold to prevent burns.
• This gas appliance must only be used outdoors.
• This gas appliance should be used on a flat and non-flammable surface.
• Do not move the appliance during use.
• Turn off the gas supply at the gas bottle after use.
• Any modification of the appliance may be dangerous and is not permitted.

MODEL GAS STOVE : CA-SGB07

BE,FR,IT,LU,LV,IE,GB,GR,
PT,ES,CY,CZ,LT,SK,OH,SI
I3B/P(30)| Butane at 30 mbar.| LU,NL,DK,FI,SE,CY,CZ,EE,
LT,LV,MT,SK,SI,BG,IS,NO, TR,HR,RO,IT,HU

Warning :
KEEP OUT OF REACH OF CHILDREN !
This appliance is not fitted with an igniter. Please use a match or taper to light.

ASSEMBLY INSTRUCTIONS

1. FIX THE BURNER ASSEMBLY INTO THE FRAME WITH 2 X SCREWS AT SUPPORT ( A ) AND SUPPORT ( B ).
2. FIX THE FOUR LEGS TO THE FRAME USING 2 XSCREWS AND NUTS FOR EACH LEG
3. FIT GAS VALVE INTO BURNER ASSEMBLY AND SECURE BY TIGHTENING LOCKING NUT.
   

IMPORTANT SAFETY INFORMATION FOR THE CORRECT SET UP AND USE OF THIS APPLIANCE. ( GAS HOSE AND REGULATOR IS NOT INCLUDED WITH THIS APPLIANCE )

1. Push the gas hose onto the hose tail of the control valve until none of the hose tail is visible and secure tightly with a screwed hose clip.
2. Push the other end of the gas hose onto the hose tail of the regulator until none of the hose tail is visible and secure tightly with a screwed hose clip
3. The regulator must comply with the requirements of EN 12684 :2001,
4. The hose used must conform to the relevant standard for the country of use, and the length cannot exceed 1.50m. Worn or damaged hose must be replaced.
5. The gas supply hose should be checked periodically and should be replaced if damaged or at least every two years.
6. This appliance is rated I3+ and as such can ONLY be used with either 13Kg Propane or 15Kg Butane gas bottles.
7. BEFORE USING THIS APPLIANCE YOU MUST CONDUCT A LEAK TEST AS DESCRIBED ON

Leak testing:
Leak test each time a new gas cylinder is connected or after a long period without having used the appliance.
Make sure that the gas valve is secured into the burner assembly.
Make sure that the hose has no cracking and splitting and is away from bottom casting of the appliance before each use.

IMPORTANT: if you cannot stop a gas leak, turn off the gas bottle valve or regulator lever and disconnect the regulator from the gas bottle then call your local gas dealer.

Perform this leak away from open flames or sparks and do not smoke!

1. Make 2-3 fluid ounces of leak detecting solution by mixing one part washing up liquid with 3 parts water OR use a proprietary gas leak fluid.

2. Make sure that the control knob is in the OFF position.

3. Connect the regulator to the gas bottle.

4. After you are sure of the safe connection, completely open the gas cylinder valve or turn your gas regulator to the on position.

5. Brush the following parts with soapy water:
   – gas tank valve
   – regulator
   – hose and hose connections
   – valve
   – welds or seams on the gas tank
   IMPORTANT!
   If bubbles appear, there is a gas leak, Turn off the gas tank valve or regulator to the off position immediately!

6. If there is a leak, re-tighten all the gas connections and repeat procedure (step 2 to step6). After the leak test, turn off the gas supply at the bottle or regulator

7. If the leak continues, do not try to fix the problem yourself. Please consult with your LPG supplier.
   

Be very careful when you use this stove under 0°C. When the temperature is under 0°C, the rubber joints may harden and cause a gas leak.
Always make sure that the gas does not leak before and after the stove ignition.
The use of a stove whilst leaking may cause fires, burns, serious injuries or death.
Keep children away from the stove and the gas bottle – Lifestyle recommends a distance of more than 3 meters.
Never leave a hot or ignited stove unattended.
When installing the flexible gas hose, it should kept clear of any hot and sharp objects.
When changing the flexible gas hose, it is necessary to follow the criteria set down according to the local standards in force.

Installation of the stove

1. Remove any combustible materials or flammable liquids or vapours from the cooking area.
2. Put the stove on a solid, stable and flat surface to ensure the stability of the stove.
3. The flexible gas hose should be kept clear of any hot or sharp objects to ensure that it is not subjected to twisting or damage.
4. The cooking area should be well ventilated.
5. When changing the gas cylinder, it must be carried out away from any source of ignition.
6. In order to protect the surface, the temperature of the surface on which the stove is placed cannot exceed 50 C.

WARNING
Move any combustible materials to more than 1.2 meters away from the ignited stove or a stove you intend to ignite.
Move any flammable liquids or vapours to more than 7.6 meters away from the ignited stove or a stove you want to ignite.

This stove can set fire to combustible materials, liquids or flammable vapours and lead to fire risk, burns, serious injuries or death.
Move away any empty gas cylinders from the stove and any heat sources.
Isolate any empty gas cylinders by moving them away from the burner as much as possible.
This appliance must be kept away from any flammable materials

Ignition of the stove

1. Position a lit match or a lighter above the burner ring.
2. Open the control valve to release the gas and light the burner.
3. If the burner has not lit, turn off the control valve, wait 5 minutes and repeat step1.
4. When the burner is alight you can adjust the flame by rotating the control knob on the gas valve.DO NOT FULLY OPEN THE CONTROL VALVE WHEN IGNITING THE STOVE.
5. To turn the stove off turn the cylinder valve or regulator switch to the OFF position. WHEN THE FLAME HAS EXTINGUISHED turn the control knob on the gas valve to the off position.
6. Wait at least 5 minutes for the appliance to cool properly before cleaning or moving.
   WARNING
   Never put your head or your body above the ignited stove when you light it or cook on it. This is a dangerous behavior that may lead to fire, burn, serious injuries or death.

Use of the stove for cooking

1. Put food or liquid in a suitable container (or kitchenware).
2. Put the kitchenware in the middle of the stove.
3. Turn the control valve to adjust the heat.
4. Please clean and maintain in line with the frequency of use
5. Turn off the gas supply immediately in the event of gas leak
6. When handling particularly hot components, it is recommended to use protective gloves.

WARNING
Never move a hot or ignited stove. Switch the stove off and wait until it is cold more than 5 minutes before moving it. To move a hot or turned-on stove may lead to fire risk, burns, serious injuries or death.
Never group together one or many stoves. Never use any stove to heat empty or dry pans. Such use of the stove may lead to fire risk, burns, serious injuries or death. Never use kitchenware that is unsuitable for the stove – especially the pan support (convex or concave bottom, some enamelled kitchwares, etc). The use of unsuitable kitchenware may lead to the instability of the stove. It could fall over and lead to fire, burns, serious injuries or death.
The part sealed by the manufacture or his agent cannot be altered by the users.

WARNING
Always separate the stove to the gas bottle before storing. If you do not remove the gas cylinder before storage it may leak gas and cause a fire, burns, serious injury or death. Always store gas cylinders in a well ventilated area away from any potential source of heat or ignition, including: water heaters, stoves or boilers, or in a place where the temperature exceeds 49 ° C. The storage of cylinders near sources of heat or ignition when the temperature exceeds 49 ° C can cause an explosion and result in fire, burns, severe injury or death.

Problems

Customer Support

Distributed by:
Lifestyle Appliances Limited
Unit 66 Enfield Industrial Estate, Redditch, Worcestershire, B97 6DE
W: www.lifestyleappliances.co.uk E: sales@lifestyleappliances.co.uk T: 01527 65126

References

• Lifestyle Appliances - Indoor and Outdoor Heaters, Firepits & More!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>