GAMA SONIC GS-97B-F Imperial Bulb Solar Lamp Instruction Manual
- October 30, 2023
- GAMA SONIC
Table of Contents
- GAMA SONIC GS-97B-F Imperial Bulb Solar Lamp
- Product Information
- What’s in the Box
- Technical Assistance/Warranty Claims/Replacement Parts
- Product Usage Instructions
- Gama Sonic’s Bulb Technology
- Solar Lamp Location
- Assembly Instructions
- Operation Instructions
- Replacing the Batteries
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
GAMA SONIC GS-97B-F Imperial Bulb Solar Lamp
Product Information
The product is the Imperial Bulb Solar Lamp by Gama Sonic. The lamp comes with two finials, an Eagle and an Acorn, and uses Gama Sonic’s patented Bulb technology which gives the lamp the look and feel of a traditional incandescent lamp. The lamp’s solar panels charge its batteries during the day and the lamp automatically turns on at dusk. The lamp uses a 3.2V/3000mAh Li- Ion battery with matching connector (Item # GS32V30) and has the option to use two additional batteries which can help extend duration if the lamp receives more than four hours of direct sunlight.
What’s in the Box
- A = Top
- B = Fixture
- C = Acorn Finial
- D = Eagle Finial
- E = Finial Cap
- Bulb
Technical Assistance/Warranty Claims/Replacement Parts
If you require technical assistance, need to make a warranty claim, or need to purchase replacement parts, you can contact Gama Sonic’s toll-free number within the US at +1-800-835-4113 or visit their website at www.gamasonic.com.
Product Usage Instructions
- For optimum light duration throughout the night, mount the solar lamp in a spot where it will receive the maximum amount of direct sunlight throughout the day.
- To assemble the lamp, remove the top (A) from the fixture (B).
- Screw in the GS Solar LED bulb into the fixture.
- Move the operation switch to the High or Low position according to your preferences Your lamp will operate automatically at dusk.
- For best results, the solar light must be charged in the ON position (High or Low) for at least 2 days of full direct sunlight.
- To replace the batteries, remove the top (A) from the fixture (B) by twisting counterclockwise.
- Switch the lamp off and remove the bulb.
- Remove the battery compartment screw and cover.
- Remove the battery and unclip the connector.
- Make sure the new battery is a 3.2V/3000mAh Li-Ion battery with a matching connector (Item # GS32V30).
- Clip the battery in and install the battery in the compartment.
- Replace the battery cover and screw.
- Repeat steps 3-7 for the second battery.
- Re-install the bulb and switch the lamp back on.
- Place the top (A) back on top of the fixture (B) and secure by twisting clockwise.
Maintenance
Clean the solar panels regularly with a damp towel to guarantee optimum performance. Do not use any type of solvent for cleaning and be careful not to put too much pressure on the solar panels while cleaning.
Troubleshooting
If your solar light does not come on as expected despite observance of all the instructions, please try the following steps:
- Make sure that the solar lamp is not being affected by any other light source.
- Ensure the solar lamp is not positioned in the shade during the day.
- Check that the batteries are installed correctly.
Gama Sonic’s Bulb Technology
Gama Sonic’s patented Bulb technology gives your solar lamp the look and feel of a traditional incandescent lamp. This helps to distribute light further than traditional solar lamps
Solar Lamp Location
For optimum light duration B throughout the night, it is very important to mount your solar lamp in a spot where it will receive the maximum amount of direct sunlight throughout the day. For best results, the solar light must be charged in the “ON” position (High or Low) for at least 2 days of full direct sunlight.
Assembly Instructions
NOTE If you are replacing an existing gas/ electric post light, you must consult a certified technician to disconnect them before installation.
- Remove the top (A) from the fixture (B) by twisting counterclockwise.
- Install the LED bulb and turn the lamp on.
- Reassemble the lamp by twisting the top (A) clockwise.
- Place the finial cap (E) on the top of the lamp.
- Choose the finial of your choice (C or D) and screw it into the top (A) through the finial cap (E) and twist it clockwise
- Install the lamp on your existing 3” post and secure by tightening the set screw
NOTE Do not over-tighten the set screws.
Operation Instructions
- Remove the top (A) from the fixture (B).
- Screw in the GS Solar LED bulb into the fixture.
- Move the operation switch to the High or Low position according to your preferences:
- Low = softer light, longer duration
- High = brighter light output
Your lamp will operate automaticallyat dusk.
Replacement Parts
Replacement Batteries and Bulbs are available at www.gamasonic.com or via
our Toll-Free number: +1-800-835-4113. Your lamp can use the following bulbs:
A60WW20W – included bulb with Warm
White LEDs (2700K)
A60BW20W – bulb with Bright White
LEDs (6000K)
F30WW05W – Flame bulb with
simulated flame LEDs
T45WW10W – Edison LED Bulb with
Warm White LEDs (2700k)
Your Lamp uses two of the following battery:
GS32V30
This lamp has the option to use two additional batteries which can help extend
duration if the lamp receives more than four hours of direct
Replacing the Batteries
- Remove the top (A) from the fixture (B) by twisting counterclockwise.
- Switch the lamp off and remove the bulb.
- Remove the battery compartment screw and cover.
- Remove the battery and unclip the connector.
- Make sure the new battery is a 3.2V/3000mAh Li-Ion battery with matching connector (Item # GS32V30)
- Clip the battery in and install the battery in the compartment.
- Replace the battery cover and screw.
- Repeat steps 3-7 for the second battery.
- Re-install the bulb and switch the lamp back on.
- Place the top (A) back on top of the fixture (B) and secure by twisting clockwise
Maintenance
Clean the solar panels regularly with a damp towel to guarantee optimum performance. Do not use any type of solvent for cleaning and be careful not to put too much pressure on the solar panels while cleaning.
Troubleshooting
If your solar light does not come on as expected despite observance of all the instructions, please try the following steps:
- Make sure that the solar lamp is not being affected by any other light source.
- Ensure the solar lamp is not positioned in the shade during the day.
- Check that the batteries are installed correctly.
NOTE The performance of the solar lamp will vary with the time of year.
It will last longer when it hashad a full day in the sun rather than a day in
overcast weather.
WINTERTIME TIPS For optimal performance, be sure to remove any snow or
debris accumulation from solar panel(s). A solar panel free of debris will
charge the batteries much more efficiently.
WARNING Please keep out of reach of children. Do not dispose of the Li-
Ion battery in the regular trash,municipal waste stream or by fire as
batteries may leak or explode. Do not open, short circuit, or mutilate
batteries as injury may occur. Preserve our environment by recycling Li-Ion
batteries or disposing of them in accordance with local, State and federal
regulations. Do not mix old and new batteries. Replacement Batteries and
Bulbs are available at www.gamasonic.com
References
- Gama Sonic Solar Lighting-Upscale Solar Lamps & Solar Lamp Posts
- Residential and Commercial Outdoor Solar Lights | Gama Sonic
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>