ANKER 343 USB-C Hub User Manual
- June 10, 2024
- Anker
Table of Contents
Anker 343 USB-C Hub
(7-in-1, Dual 4K HDMI)
USER MANUAL
At a Glance
Tips: Please use the included USB-C cable.
Item | Description |
---|---|
1. USB-C Port (Connects to Host) | Connects to a laptop. |
2. Power Indicator | Turns white when connected to a laptop. Flashes white |
once every second when upgrading firmware.
3. USB-A 3.2 Gen 1 Port| 5 Gbps data transfer.
4. USB-C 3.2 Gen 1 Port| 5 Gbps data transfer.
5. PD-IN| • Connect to a Power Delivery charger to charge a connected laptop
or tablet.
• Supports up to 100W input.
6. HDMI Port| Up to 4K@60Hz output to a single display when connected to a
laptop.
Specifications
Data Speed | 5 Gbps |
---|---|
HDMI | Single Display: |
Supported Systems | Windows 10/11, macOS 10.14 and above |
Important Safety Instructions
- Avoid dropping.
- Do not disassemble.
- Do not expose to liquids.
- For the safest and fastest charge, use original or certified cables.
- This product is suitable for moderate climates only.
- The maximum ambient temperature when using this product must not exceed 104°F / 40°C.
- Open flame sources, such as candles, must not be placed near this product.
- Only use a dry cloth or brush to clean this product.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance
with Directives 2014/30/EU & 2011/65/EU. The full text of the EU declaration
of conformity is available at the following internet address:
https://www.anker.com.
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Songkok, Kowloon, Hong Kong
The following importer is the responsible party contract for EU matters:
Anker Innovations Deutschland GmbH
Georg-Much-Strasse 3, 80807 Munich, Germany
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance
with the following Directives:
The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012 & Electromagnetic Compatibility
Regulations 2016
The full text of the GB declaration of conformity is available at the
following internet address: https://www.anker.com.
The following importer is the responsible party contract for UK matters:
Anker Technology (UK) Ltd
GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The following importer is the responsible party contract for FCC matters:
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1-800-988-7973
IC Statement
This device complies with Industry Canada license-ICES-003. Operation is
subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
Customer Service
Lifetime Technical Support
support@anker.com
support.mea@anker.com (For Middle East and
Africa Only)
(US/CA) +1 (800)988 7973
(UK) +44 (0) 1604 936200
PAP 22
Arcola Carta
For FAQs and more information, please visit:
anker.com/support
| |
---|---|---
@anker_official
@anker_jp| @Anker Deutschland
@Anker Japan
@Anker| @AnkerOfficial
@Anker_JP
Product Number: A8372 51005003712 V01
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>