Laserworld DS-1000RGB Showeditor High Power Full Colour Semi Professional Laser User Guide
- June 10, 2024
- LASERWORLD
Table of Contents
Laserworld DS-1000RGB Showeditor High Power Full Colour Semi Professional
Laser
Product Information
The Laserworld Showeditor is a professional laser show software that allows
users to create and program laser shows with ease. The software establishes a
connection to the internet during the setup process to load the latest status
info for the software. It comes with a large set of preset figures, advanced
timeline laser show programming, and easy figure creation.
Product Usage Instructions
- Configure ShowNET Interface: Before installing the Laserworld Showeditor software, configure the ShowNET interface by setting the Dip switch at the interface for AutoIP. The Dip switch setting should be as follows:
Switch| 1| 2| 3| 4| 5| 6| 7| 8| 9| 10
---|---|---|---|---|---|---|---|---|---|---
On (1) / Off (0)| 0| 0| 0| 0| 0| 1| 0| 0| 0| 0
After setting the Dip switches, unplug the power supply and reconnect it.
-
Download the Latest Laserworld Showeditor Software
Version: Go to http://www.showeditor.com and download the latest version of Laserworld Showeditor. It is highly recommended to use the latest version available on the website as the software version on the CD that comes with the package is only a fallback option. -
Install the Laserworld Showeditor Software:
Follow the instructions of the installer for the Laserworld Showeditor Software installation. -
Start Laserworld Showeditor:
After installing the software, start it by clicking on the desktop icon. If any error shows up, refer to the FAQ section at
http://www.showeditor.com/faq for help. -
Select the Operation Mode: Select the operation mode that you want to use – Live, Timeline, Figure Editor, etc. All software parts are completely integrated and
linked, so any option is available later as well. Go to Options -> Hardware and ensure that the ShowNET interface is properly connected. Assign it to track one. -
Live Show Window: The Live Show Window comes with a large set of preset figures. Give it a try and instantly start with your laser show.
-
Timeline Window: The Timeline Window is designed for advanced timeline laser show programming. Several shows are included in delivery – load them and instantly get
going. -
Figure Editor: The Figure Editor allows for easy figure creation – just draw any shapes or type a text and directly output it to your laser.
-
User Manual: For more details or if you face any problems, read the user manual. The user manual can also be found online at http://www.showeditor.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>