SIGNATURE HARDWARE 434145 Whitby Outdoor Post Lantern Light Instruction Manual
- June 10, 2024
- Signature Hardware
Table of Contents
SIGNATURE HARDWARE 434145 Whitby Outdoor Post Lantern Light
Product Information
WHITBY SKU: 434145
The WHITBY fixture is an electric lamp that requires professional installation
by a licensed electrician. The fixture includes a cage and tube assembly, wire
connectors, and screws required for installation. The fixture has a neutral
white color and is designed to be mounted onto a wall or ceiling junction box.
It is important to follow all local plumbing and building codes during
installation. Use care when handling glass shades and bulbs.
Recommended Tools
- Wire cutters/strippers
- Phillips screwdriver
- Electric tape (optional)
Care and Maintenance
To clean the fixture, wipe with a damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol. Shut off the main power supply before cleaning the product or changing light bulbs.
Usage Instructions
-
Shut off the power at the circuit breaker and remove the old fixture.
-
Carefully unpack the new fixture and lay out all the parts on a clear area. Avoid losing any small parts necessary for installation.
-
Connecting the Wires:
- Connect the black wire from the fixture to the supplied wire.
- Connect the white wire from the fixture to the white (neutral) house wire.
- Secure all wire nuts.
- If there is a ground wire, connect the fixture’s ground wire to it.
- Tuck wire connections neatly into the junction box.
-
Attach the Cage (A) to the Tube (B), and secure with Screws
(D). -
Turn on the power at the circuit breaker and test the fixture.
-
If you need further assistance, check out the Help Center at www.signaturehardware.com or contact customer service through live chat or email at support@signaturehardware.com.
BEFORE YOU BEGIN
We recommend consulting a professional if you are unfamiliar with installing
electric fixtures. Signature
Hardware accepts no liability for any damage to the faucet, plumbing, sink,
counter top, or for personal injury during installation.
Observe all local plumbing and building codes.
Unpack and inspect the product for shipping damage.
If any damage is found, contact our Customer
Relations team via live chat at
www.signaturehardware.com or by emailing
support@siganturehardware.com.
GETTING STARTED
Ensure that you have gathered all the required materials that are needed for
the installation.
PRODUCT CARE AND MAINTENANCE
To clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol.
CAUTION:
Shut off main power supply before cleaning product or changing light bulbs.
All glass is fragile. Use care when handling glass shades and bulbs.
RECOMMENDED TOOLS AND ACCESSORIES
INSTALLATION
-
Shut off the power at the circuit breaker and remove old fixture,
-
Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
-
CONNECTING THE WIRES Connect the black wire from the fixture to the supplied w ire. Connect the white wire from the fixture to the white (neutral) house wire.
Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet has a ground wire (green or bare copper), connect fixture’s ground wire to it. Tuck the wire connections neatly into the junction box. -
Attach the Cage (A) to the Tube (B), and secure with Screws (D).
SAVE THIS MANUAL: RETAIN FOR CONSUMER’S USE.
READ THESE INSTRUCTIONS COMPLETELY BEFORE INSTALLING THE PRODUCT: FOR PRODUCT
OR INSTALLATION QUESTIONS PLEASE CALL CUSTOMER. SERVICE AT
1-800-221-3379.
1.855 715.1800
signaturehardware.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>