Signature Hardware 476912 Fair Avenue 2-Light Outdoor Wall Light Instruction Manual
- June 10, 2024
- Signature Hardware
Table of Contents
Signature Hardware 476912 Fair Avenue 2-Light Outdoor Wall Light
Instruction Manual
BEFORE YOU BEGIN
We recommend consulting a professional if you are unfamiliar with installing electric fixtures. Signature Hardware accepts no liability for any damage to the faucet, plumbing, sink, counter top, or for personal injury during installation. Observe all local plumbing and building codes. Unpack and inspect the product for shipping damage. If any damage is found, contact our Customer Relations team via live chat at www.signaturehardware. com or by emailing support@siganturehardware.com.
GETTING STARTED
Ensure that you have gathered all the required materials that are needed for the installation.
ADDITIONAL QUESTIONS?
Still need help? Check out our Help Center at www.signaturehardware.com for product and warranty information, or contact us through live chat or by emailing support@signaturehardware.com.
CARE AND MAINTENANCE:
To clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol.
CAUTION
Shut off main power supply before cleaning product or changing light bulbs. All glass is fragile. Use care when handling glass shades and bulbs.
RECOMMENDED TOOLS AND ACCESSORIES
-
Wire Connectors (3pcs)
-
Spare mounting screw (1pc)
-
Pre-assembled screw (3pcs)
SAVE THIS MANUAL: RETAIN FOR CONSUMER’S USE.
INSTALLATION (FIG 1)
- Shut off the power at the circuit breaker and remove old fixture.
- Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
- CONNECTING THE WIRES Connect the black wire from the fixture to the supplied wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet has a ground wire (green or bare copper), connect fixture’s ground wire to it. Tuck the wire connections neatly into the junction box.
- Attach the Cage(A) to the Tube (B) , and secure with Screws (D).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>