SIGNATURE HARDWARE 434306 Amber Outdoor Wall Sconce Lámpara De Pared Para Exteriors Outdoor Wall Light Instruction Manual

SIGNATURE HARDWARE 434306 Amber Outdoor Wall Sconce Lámpara De Pared Para

Exteriors Outdoor Wall Light

Product Information

• Product Name: Ambler
• SKU: 941505
• Recommended for indoor use only
• Requires installation by a professional if the user is unfamiliar with installing electric fixtures
• Signature Hardware is not liable for any damage to the faucet, plumbing, sink, counter top, or for personal injury during installation
• Observe all local plumbing and building codes
• All glass is fragile. Use care when handling glass shades and
  bulbs

Product Usage Instructions

1. Before installation, shut off the power at the circuit breaker and remove the old fixture, including the crossbar.
2. Carefully unpack the new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for  installation.
3. Thread the 2 Mounting Screws (C) to the Mounting plate (E). You can adjust the length of the screws if necessary.
4. Attach the Mounting plate (E) to the Outlet Box (G) (not supplied) by using 2 Outlet Box Screws (B).
5. Connect the wire from the outlet box to the wire from the  fixture using Wire Connectors (3pcs).
6. Attach the Fixture (H) to the Mounting Plate by inserting the 2 Mounting Screws (C), and then secure with the 2 Cap Nuts (F).
7. To prevent moisture from entering the outlet box and causing a short, use clear caulking (i.e. Indoor/Outdoor Silicone Sealant) to outline the outside of fixture backplate where it meets the wall leaving a space at bottom to allow moisture a means to escape.
8. Turn on the power and test the fixture.

Care and Maintenance

• Shut off main power supply before cleaning product or changing light bulbs.
• All glass is fragile. Use care when handling glass shades and  bulbs.

Additional Questions:

If you have any additional product or installation questions, please check out our Help Center at www.signaturehardware.com or contact us through live chat or by emailing support@signaturehardware.com.

BEFORE YOU BEGIN

• We recommend consulting a professional if you are unfamiliar with installing electric fixtures. Signature Hardware accepts no liability for any damage to the faucet, plumbing, sink, counter top, or for personal injury during installation.
• Observe all local plumbing and building codes.
• Unpack and inspect the product for shipping damage. If any damage is found, contact our Customer
• Relations team via live chat at www.signaturehardware.com or by emailing support@signanturehardware.com.

GETTING STARTED
Ensure that you have gathered all the required materials that are needed for the installation.

CARE AND MAINTENANCE

To clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol.
CAUTION: Shut off main power supply before cleaning product or changing light bulbs.All glass is fragile. Use care when handling glass shades and bulbs.

RECOMMENDED TOOLS AND

• Wire Connectors (3pcs)
• Cap Nuts (2pcs
• Mounting Screws (2pcs)
• Ground Screw (1pc)
• Mounting plate (1pc)
• Outlet Box Screws (2pcs)

SAVE THIS MANUAL: RETAIN FOR CONSUMER’S USE. READ THESE INSTRUCTIONS COMPLETELY BEFORE INSTALLING THE PRODUCT: FOR PRODUCT OR INSTALLATIO QUESTIONS PLEASE CALL CUSTOMER. SERVICE AT 1‐800‐221‐3379.

**INSTALLATION

**

1. Shut off the power at the circuit breaker and remove old fixture, including the crossbar.
2. Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
3. Thread the 2 Mounting Screws (C) to the Mounting plate (E). (You can adjust the length of the screws if necessary.)
4. Attach the Mounting plate (E) to the Outlet Box (G) (not supplied) by using 2 Outlet Box Screws (B).
5. Now connect the electrical wires as follows: Connect the black wire from the fixture to the black house (hot) wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet has a ground wire (green or bare copper), connect fixture’s ground wire to it. Otherwise, connect fixture’s ground wire directly to the mounting plate using the green screw provided. Tuck the wire connections neatly into the junction box.
6. Attach the Fixture (H) to the Mounting Plate by inserting the 2 Mounting Screws (C),and then secure with the 2 Cap Nuts (F).
7. To prevent moisture from entering the outlet box and causing a short, use clear caulking (ie. Indoor/Outdoor Silicone Sealant) to outline the outside of fixture backplate where it meets the wall leaving a space at bottom to allow moisture a means to escape.

1.855.715.1800
SIgnaturehardware.com

References

• Signature Hardware - Shop Unique, Quality Decor

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>