LAPETEK LINO-A Dishwasher Valve Installation Guide

LAPETEK LINO-A Dishwasher Valve

OVERVIEW

• LAPETEK LINO-A
• LAPETEK ROUND-A
• LAPETEK ROUND-A

• LAPETEK LINOPIN-A
• LAPETEK ROUNDPIN-A
• LAPETEK LEVELPIN-A

All installation work must be carried out by a professional

Not included in the package

LAPETEK LINO-A

• SFS-EN ISO 817
• SFS-EN ISO 3822
• EUFI29-20001463-TH

LAPETEK ROUND-A

• SFS-EN ISO 817
• SFS-EN ISO 3822
• EUFI29-20001463-TH

LAPETEK LEVEL-A

• SFS-EN ISO 817
• SFS-EN ISO 3822
• EUFI29-20001463-TH

LAPETEK LINOPIN-A

• SFS-EN ISO 817
• SFS-EN ISO 3822
• EUFI29-20001463-TH

LAPETEK ROUNDPIN-A

• SFS-EN ISO 817
• SFS-EN ISO 3822
• EUFI29-20001463-TH

LAPETEK LEVELPIN-A

• SFS-EN ISO 817
• SFS-EN ISO 3822
• EUFI29-20001463-TH

Noise class

• Pressure loss with flow 300 kPa (0,2 l/s)
• Test pressure 1,6 MPa
• Operating pressure max.1,0 MPa
• Heat resistance max 70 °C

INSTALLATION INSTRUCTION

CHANGING THE CARTRIDGE

CLEANING THE AERATOR CACHE

CLEANING

PIN LEVER INCLUDES

PINLEVER INSTALLATION

ACCESSORIES FAUCET

Tighten wrench

Code 16002615

Flow limiter

Standard aerator cache ~13 l/min 3 bar

SPARE PARTS SET

• LAPETEK LINO-A
  • LAPETEK LINOPIN-A
• LAPETEK ROUND-A
  • LAPETEK ROUNDPIN-A
• LAPETEK LEVEL-A
  • LAPETEK LEVELPIN-A

PART LIST

LAPETEK ROUND-A

LAPETEK LINO-A

LAPETEK LEVEL-A

COLOR CODE (XX)

INSTALLER SIGNED PRODUCT TEST DOCUMENT

During installation, the installer must check the checklist below. Please note that the first checkpoints take place before the actual installation. By signing the document, the installer ensures the installation has been carried out in accordance with the installation instructions and that the faucet is functioning properly and is flawless.

Before installation:

• When removing the faucet from the packing check that all parts are included. Check also that the faucet has no visible surface defects / flaws / color defects / dents / scratches etc.

• All three supply hoses are carefully fastened and tightened by hand.

• The spout restriction is made and the retaining screw is attached.

• Check the tightness of the hand levers fixing screws.

• Dishwasher supply hose plug is fastened and tightened by hand (do not overtighten) if the supply hose is not in use.
  After installation:

• The aerator cache has been removed and water has been drained through the faucet. The aerator cache is put back in place.

• The faucet and all of the connections have been checked and no leaks have been detected.

• All functions and the turning radius of the spout have been checked.

In case any of the checkpoints 1) to 8) above are not in order, the installer must immediately contact the seller/customer as well as Lapetek service at +358 9 2511 030 for further information.
The warranty granted by Lapetek is conditional on the completion of this document and the certification of the condition of the checkpoints. A copy of the test document must be submitted with a product reclamation.

• Installer’s signature
• Date and place
• Clarification of the installer’s name
• Company name

OY LAPETEK AB
www.lapetek.fi 
sales@lapetek.fi

Oy Lapetek Ab www.lapetek.fi
Sales, technical support and service sales@lapetek.fi

References

• Lapetek

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>