LAPETEK PLASMA 60 60 cm Cooker Hoods Instruction Manual

: August 14, 2024
: LAPETEK

Table of Contents

SAFETY INFORMATION
USAGE, CLEANING AND MAINTENANCE
WARRANTY AND MAINTENANCE SHOP
TYPE PLATE
FUNCTIONS
What Is In The Box
Dimension
Assembly Instruction
REPLACING LIGHT
GREASE FILTER
TEST DOCUMENT
CUSTOMER SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LAPETEK PLASMA 60 60 cm Cooker Hoods

Read this manual before installation, wiring and use. Always keep these instructions with the appliance

SAFETY INFORMATION

All installation work must be carried out by a professional.
Before installation, make sure neither the appliance nor its parts are damaged. In case of damage, please contact your dealer. Do not install a defective product! An installed appliance is considered tested and approved.
Always follow the instructions in this manual. Lapetek is not liable for any damage, fires etc., resulting from improper or incorrect installation or use.
The installation of the appliance must be carried out in a way that the cooker hood can be removed for maintenance without dismantling other room structures. In case of warranty maintenance, Lapetek is not liable for any costs resulting from dismantling other structures.
The cooker hood may look different from the drawings in this booklet. However, instructions of use, maintenance and installation remain the same. Make sure the product and its version number correspond to the information in the manual.
Always wear protective gloves during installation and maintenance procedures.

USAGE, CLEANING AND MAINTENANCE

The cooker hood is designed for extracting cooking fumes and is for domestic use only.
Unplug the appliance or remove the fuse before cleaning or maintenance.
Never use the appliance without a grease filter.
Do not store or place anything on top of the appliance.
Cooker hoods with plasma filters circulate air (no need for replacement air).
Do not flambé or set an open fire under or near the appliance.
The amount of grease inside the hood and the grease filters should be monitored regularly by removing the grease filter and cleaning both the appliance and the grease filter when necessary.
The grease filter must be cleaned regularly (whenever necessary or at least every 3 months) to prevent risk of fire.The grease filter can be washed in a dishwasher. Do not use the longest and hottest washing programs. The grease filters will wear out and should be replaced when their surface/color begins to be worn or faded.

WARRANTY AND MAINTENANCE SHOP

Lapetek cooker hoods are covered by a two-year (2) warranty. Lapetek is not liable for any indirect defect or damage.
The warranty does not cover consumable parts such as lamps, light sources, filters, etc.
This device is manufactured in accordance with EU Directive 2012/19/UE (SER).
Find the nearest authorized maintenance shops: lapetek.fi

TYPE PLATE

FUNCTIONS

The appliance starts with the key for speed 1. The speed increases with every push of the key to the next higher speed 2,3, or 4. Speed 4 is intensive speed and only on for 5 minutes before returning to speed 3.

The speed is reduced and the appliance is turned off using the key.

When pressing the timer key while the engine is running at speed 1, 2, or 3, the engine stops after a set time, extracting the fumes of a hot pan on the cooker while the pan is cooling. When the timer key is pressed, the number 0 will begin to flash on the display. Within 20 seconds the key can then be pressed to set the timer: the number on the display changes to represent the number of times (1,2,3…) the key is pressed, which in turn represents the timer setting (1=10, 2=20, 3=30, 4=40, 5=50, 6=60, 7=70, 8=80, 9=90 minutes).

Pressing the light key briefly turns the lights on / off. The lights turn on at full luminous intensity suitable for working. In addition, the lights have a three-stage dimming function. When the lights are on at full power, pressing the key for three seconds will dim the lights to general lighting. When pressing the key once more for three seconds, the lights dim to ambient lighting. The lights always turn on at full luminous intensity.

Pressing the and keys simultaneously activates the color temperature adjustment of the lights and the letter L starts flashing on the display. Pressing the key increases the color temperature (max. ~ 6000 K) and pressing the key decreases the color temperature (min. ~ 3000 K). The selected color temperature remains set if the switch panel is not touched within 20 seconds.

What Is In The Box

A : Plasmafilter
B : O-rings
C : Distribution socket
D : Eccentric adapter
E : Fastening clip

Dimension

! The maximum installation height from the stove is 750 mm. In this case, the total room height can be 2650 mm (see other dimensions in the picture).

Assembly Instruction

! Use fixing screws that are suitable for the wall material.

REPLACING LIGHT

GREASE FILTER

! Once a month

TEST DOCUMENT

The warranty granted by Lapetek is conditional on the completion of this document and the certification of the condition of the checkpoints.

Before installation

The appliance is externally in good condition when removed from packaging and includes all its parts.
Before mounting all motor speeds work, the suction power is perfect and there are no abnormal noises from the motor.
The lights work.
Adjust preferred color temperature.

After installation

All functions of the cooker hood are operational, and the plasma filter has been installed and connected to the power outlet.
The exhaust opening in the duct

In case any of the checkpoints 1) to 5) above are not in order, the installer must immediately contact the seller