Metra 95-8246HG Toyota Tundra 2014-UP DDIN Instructions
- June 5, 2024
- Metra
Table of Contents
Metra 95-8246HG Toyota Tundra 2014-UP DDIN KIT FEATURES
- DDIN radio provision
- Painted high gloss black
KIT COMPONENTS
- Radio housing trim panel
- Brackets
-
8 x 3/8” Phillips screws (4)
DASH DISASSEMBLY
- Unsnap and remove the factory climate controls. (Figure A)
- Remove (4) 10 mm bolts securing the factory radio and remove it. Continue to Kit Assembly
KIT ASSEMBLY
Double DIN radio provision
- Attach the factory panel clips to the radio housing trim panel.
- Attach the brackets to the radio housing trim panel using (4) of the supplied #8 x 3/8” screws. (Figure A)
- Slide the radio into the bracket/radio housing assembly and secure to the assembly using the screws supplied with the radio. (Figure B)
- Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
- Reassemble dash in reverse order of disassembly.
Having difficulties? We’re here to help.
Contact our Tech Support line at:
386-257-1187
Or via email at: techsupport@metra-autosound.com
Tech Support Hours (Eastern Standard Time)
Monday – Friday: 9:00 AM – 7:00 PM Saturday: 10:00 AM – 7:00 PM Sunday:
10:00 AM – 4:00 PM
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by enrolling in the most
recognized and respected mobile electronics school in our industry.
Log onto www.installerinstitute.edu or
call 386-672-5771 for more information
and take steps toward a better tomorrow.Metra recommends MECP certified
technicians
References
Read User Manual Online (PDF format)
Loading......