45-IFA-R25 Kitchen Sink Lapetek Lavin Instruction Manual

August 17, 2024
LAPETEK

45-IFA-R25 Kitchen Sink Lapetek Lavin

Specifications

  • Product Name: LAPETEK LAVIN 45-IFA/R25, LAPETEK LAVIN 60-IFA/R25
  • Product Code: 1550IFA, 1552IFA
  • Quantity: 10 pieces

Product Usage Instructions

  1. Check the product upon delivery within 8 days.
  2. Ensure the sink fits the designated hole in the worktop.
  3. Install the water trap without interfering with other functions.
  4. Tighten and check all piping connections.
  5. Fill the sink with water up to the overflow and open the water plug to test for leaks.

Contact Information

OY LAPETEK AB, FINLAND
Website: www.lapetek.fi
Email: sales@lapetek.fi

FAQ

  • Q: What should I do if I notice damage to the product after 8 days?
    A: Contact OY LAPETEK AB for further assistance.

  • Q: How do I ensure the water trap is installed correctly?
    A: Install the water trap in a way that it does not interfere with other functions of the sink.

LAPETEK LAVIN 45-IFA/R25
LAPETEK LAVIN 60-IFA/R25

Installation manual

Sink, brackets, bottom valve system, and Smartloc-trap
All installation work must be carried out by a professional. The installer must complete the testing protocol at the beginning of the installation manual.

Test document

During installation, the installer must check the checklist below. Please note that the first checkpoints take place before the actual installation. By signing the document, the installer ensures the installation has been carried out in accordance with the installation instructions and that the sink is functioning properly and is flawless.

Before installation

  1. The notice period for a damaged product is 8 days from receiving the sink.
  2. The hole has been made in the worktop for the sink according to the dimensional drawing from the installation manual. The sink has been fitted to it before installation
  3. The straightness of the worktop on all sides of the sink has been checked,
  4. The sink and the hole for the sink have been treated with silicone (not adhesive) as instructed. 
  5. The wall/floor drain is installed in relation to the sink in such a way that the water trap should be installed in such a way that it doesn’t interfere with the installation of the waste mechanism and the sink or other functions. 
  6. All of the piping connections have been tightened and checked.
  7. The sink is filled with water up to the overflow and the water plug is opened, to ensure good water flow and tightness of the piping.
  8. The piping of the sink is installed in such a way that it doesn’t disturb the functioning of the waste mechanism.
  • In case any of the checkpoints 1) to 8) above are not in order, the installer must immediately contact the seller/customer as well as Lapetek service at +358 9 2511 030 for further information.
  • The warranty granted by Lapetek is conditional on the completion of this document and the certification of the condition of the checkpoints A copy of the test document must be submitted with a product reclamation.
  • Installer’s signature
  • Name clarification
  • Date and place
  • Company name

Top-mount

Cut a hole for the sink

  • Make sure the sink fits into the cut-out
/SINK/ CODE HOLE/ HÅL (A X B)
LAVIN 45-IFA/R25 1550IFA A 380 mm x B 482 mm + 2/-1
LAVIN 6-IFA/R25 1552IFA A 478 mm x B 482 mm + 2/-1

With tall faucets add two additional brackets (A)

245-IFA-R25-Kitchen-Sink-Lapetek-Lavin- \(1\)

! Install the waste and odour trap.

Care Instructions
www.lapetek.fi/fi/altaiden-puhdistaminen-71.html

contact Kontakt information

OY LAPETEK AB, FINLAND
www.lapetek.fi | sales@lapetek.fi

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals