LAPETEK APOLLO-V Stylish Cylindrical Kitchen Hood Installation Guide
- August 12, 2024
- LAPETEK
Table of Contents
LAPETEK APOLLO-V
Installation instructions
Read this manual before installation , wiring and use. Always keep these instructions with the appliance
More information on the website www.lapetek.fi
SAFETY INFORMATION
- Read carefully this booklet before installing the appliance. Always follow the instructions in this manual. Lapetek is not liable for any damage, fires etc., resulting from improper or incorrect installation or use.
- All installation work must be carried out by a professional.
- Before installation, make sure neither the appliance nor its parts are damaged. In case of damage, please contact your dealer. Do not install a defective product! An installed appliance is considered tested and approved.
- The installation of the appliance must be carried out in a way that the cooker hood can be dismounted for service without dismantling other room structures. In case of warranty maintenance, Lapetek is not liable for any costs resulting from dismantling other structures.
- The cooker hood may look different from the drawings in this booklet. However, instructions of use, maintenance and installation remain the same. Make sure the product and its version number correspond to the information in the manual.
- Always wear protective gloves during installation and maintenance procedures.
USAGE, CLEANING AND MAINTENANCE
- The cooker hood is designed for extracting cooking fumes and is for domestic use only.
- Unplug the appliance or remove the fuse before cleaning or maintenance.
- Never use the appliance without a grease filter.
- Do not store or place anything on top of the appliance.
- Make sure there is adequate exchanging air from outside in the room by, for example, opening a window when the hood is in use. Inadequate ventilation prevents the hood from having a proper suction.
- Do not flambé or set an open fire under or near the appliance.
- The amount of grease inside the hood and the grease filters should be monitored regularly by removing the grease filter and cleaning both the appliance and the grease filter when necessary.
- The grease filter must be cleaned regularly (whenever necessary or at least every 3 months) to prevent risk of fire. The grease filter can be washed in a dishwasher. Do not use the longest and hottest washing programs. The grease filters will wear out and should be replaced when their surface/color begins to be worn or faded.
WARRANTY AND MAINTENANCE SHOP
- Lapetek cooker hoods are covered by a two-year (2) warranty. Lapetek is not liable for any indirect defect or damage. The warranty does not cover consumable parts such as lamps, light sources, filters, etc.
- This device is manufactured in accordance with EU Directive 2012/19/UE (SER).
- Find the nearest authorized maintenance shops: lapetek.fi
TYPE PLATE
FUNCTIONS
The appliance starts with the key for speed 1. The speed increases with every push of the key to the next higher speed 2,3, or 4. Speed 4 is intensive speed and only on for 5 minutes before returning to speed 3.
The speed is reduced and the appliance is turned off using the key.
When pressing the timer key while the engine is running at speed 1, 2, or 3, the engine stops after a set time, extracting the fumes of a hot pan on the cooker while the pan is cooling. When the timer key is pressed, the number 0 will begin to flash on the display. Within 20 seconds the key can then be pressed to set the timer: the number on the display changes to represent the number of times (1,2,3…) the key is pressed, which in turn represents the timer setting (1=10, 2=20, 3=30, 4=40, 5=50, 6=60, 7=70, 8=80, 9=90 minutes).
Pressing the light key briefly turns the lights on / off. The lights turn on at full luminous intensity suitable for working. In addition, the lights have a three-stage dimming function. When the lights are on at full power, pressing the key for three seconds will dim the lights to general lighting. When pressing the key once more for three seconds, the lights dim to ambient lighting. The lights always turn on at full luminous intensity.
Pressing the and keys simultaneosly activates the color temperature adjustment of the lights and the letter L starts flashing on the display. Pressing the key increases the color temperature (max. ~ 6000 K) and pressing the key decreases the color temperature (min. ~ 3000 K). The selected color temperature remains set if the switch panel is not touched within 20 seconds.
4 x
ACCESSORIES
Differential pressure switch
Code 806095
Gives the a commonly named “tip information” for the air ventilation machine about the start of the cooker hood
Condensate water separator
Code 810000
Reduces problems caused by condensation
Charcoal filter 1 pcs
Code 57018
Cleans the flowing air
LongLife filter 1 pcs
Code 57021
The lifetime of the reactivated and ecological LongLife filter is approximately 36 months
! The maximum installation height from the stove is 750 mm. In this case, the total room height can be 2820 mm (see other dimensions in the picture). In models with a carbon filter, chimneys cannot be placed completely overlapping to leave the extraction grille at the upper edge of the upper chimney open (-140 mm).
1
2
3
4
5
6
7
8
9
10
11
12
Leave the screws loose and tighten only in step 13, where you’ll attach the lower part of the hood approx 1 cm over the top part.
13
14a
14b
REPLACING LIGHT
GREASE FILTER
! Once a month
CHARCOAL FILTER
! Four times a year
CHARCOAL FILTER LONG-LIFE
! Wash with the hottest program
! Activate in the oven max. 100 degrees
TEST DOCUMENT
The warranty granted by Lapetek is conditional on the completion of this document and the certification of the condition of the checkpoints. A copy of the test document must be submitted with a reclamation
Before installation
1. The appliance is externally in good condition when removed from packaging and includes all its parts. There is no imperfections visible defects, color defects, bumps, scratchesn etc.
2. Before mounting all motor speeds work, the suction power is perfect and there are no abnormal noises from the motor.
3. The lights work.
Adjust preferred color temperature.
4. The non-return valve is installed and working.
5. There are no strange noises from the cooker hood.
After installation
6. In case the suction power is poor after installation, the part of the ventilation duct causing the decrease in power must be determined.
- In case any of the checkpoints 1) to 5) above are not in order, the installer must immediately contact the seller/customer as well as Lapetek service at +358 9 2511 030 for further information
- In case checkpoint 6) is not in order, the installer must contact the customer/seller and let them know that the house has a problem in the ventilation duct that decreases airflow
Installer’s signature
Date and place
Name clarification
Company name
Contact
OY LAPETEK AB, FINLAND
www.lapetek.fi | sales@lapetek.fi