QAZQA 97253 Pallon Art Deco Ceiling Lamp Instruction Manual

June 16, 2024
QAZQA

QAZQA 97253 Pallon Art Deco Ceiling Lamp

QAZQA-97253-Pallon-Art-Deco-Ceiling-Lamp-featured

Product Information

Specifications

  • Model: Pallon CL
  • Product Code: 97253/97254/97255/97256/98766/98705/98775/99088
  • Overall Size: 23CM
  • Socket Type: E27
  • Maximum Wattage: 25W

Product Usage Instructions

1. Installation

To install the Pallon CL, follow these steps:

  1. Choose a suitable location for the light fixture.
  2. Turn off the power supply to the installation area.
  3. Remove the existing light fixture, if applicable.
  4. Connect the electrical wires of the Pallon CL to the corresponding wires in the installation area. Ensure proper grounding.
  5. Securely mount the Pallon CL to the installation area using the provided hardware.

2. Bulb Replacement

To replace the bulb in the Pallon CL, follow these steps:

  1. Turn off the power supply to the light fixture.
  2. Allow the bulb to cool down, if it was recently in use.
  3. Gently twist and remove the old bulb from the socket.
  4. Insert a new E27 bulb with a maximum wattage of 25W into the socket.
  5. Make sure the bulb is securely in place and not loose.

3. Cleaning and Maintenance

To clean and maintain the Pallon CL, follow these guidelines:

  • Regularly dust the surface of the fixture using a soft, dry cloth.
  • Avoid using harsh chemicals or abrasive materials that may damage the finish.
  • For thorough cleaning, gently wipe the fixture with a damp cloth and mild soap solution. Ensure the fixture is completely dry before reconnecting the power supply.

4. Safety Precautions

When using the Pallon CL, keep the following safety precautions in mind:

  • Always turn off the power supply before installing, replacing bulbs, or performing maintenance.
  • Ensure proper electrical grounding during installation.
  • Do not exceed the maximum wattage of 25W when selecting a bulb.
  • Avoid touching the bulb directly when it is hot or recently turned off.

Frequently Asked Questions (FAQ)

Q1: Can I use a bulb with higher wattage than 25W?

No, it is not recommended to use a bulb with higher wattage than the specified maximum of 25W. Exceeding the maximum wattage can lead to overheating and potentially damage the fixture.

Q2: Can I install the Pallon CL outdoors?

No, the Pallon CL is designed for indoor use only. Installing it outdoors may expose it to weather conditions that can damage the fixture and pose safety risks.

Q3: How do I contact customer support for further assistance?

You can contact our customer support team by visiting our website at www.qazqa.nl or by calling our offices in the Netherlands or the United Kingdom.

Safety Precautions

QAZQA-97253-Pallon-Art-Deco-Ceiling-Lamp-
fig-1QAZQA-97253-Pallon-Art-Deco-Ceiling-Lamp-
fig-2

SAFETY INSTRUCTION

Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference

  1. The lemons to serial insisted by authorized and qualified technicians according the valid
  2. Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
  3. The vertical installation witched it or the air yesterday by means of a switch in the distribution.
  4. Exterior lighting must not be installed during rain.
  5. Take account of the minimal separation distance from other objects and the room required around the fitting.
  6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
  7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
  8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
  9. Take account of all available technical information.
  10. Meaning of symbols:
    • This icon indicates the level of water-proof and dust-proof
    • Protection Class I: the fitting must be earthed
    • Protection Class Il: the fitting is doubled insulated and does not require earthing
    • Protection Class III: the fitting is low-voltage
    • Minimum distance from lighted objects (meters)
    • The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kinds of light sources with different bulb icons
    • The armature is designed to work only with the indicated voltage. Different items require different working voltages.
    • The luminaire can be used in combination with a dimmer
    • The luminaire can be dimmed by a wall switch
    • The reference light angle and light space of the luminaire
    • This luminaire cannot be disposed of together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste
  11. Take note of the symbols when connecting wires:
  • FittinQ B.V. Smaragdweg 52, 5527 LB Hapert, The Netherlands
  • FittinQ LTD 55 Baker Street, London, WIU ZEU United Kingdom

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals