Vivotek IB9367-EHT-v2 Network Bullet Camera Installation Guide
- June 10, 2024
- Vivotek
Table of Contents
Vivotek IB9367-EHT-v2 Network Bullet Camera
Product Information
The product is a network camera with the model number IB9367-EHT-v2. It comes with a waterproof rating of IP65/66/67, which makes it suitable for outdoor use. The camera is made in Taiwan and complies with part 15 of the FCC Rules.
Package Contents
- Network Camera
- Quick Installation Guide
Warnings Before Installation
- Power off the Network Camera as soon as smoke or unusual odors are detected.
- Do not place the Network Camera on unsteady surfaces.
- Do not insert sharp or very small objects into the Network Camera.
- Refer to your user’s manual for the operating temperature.
- Do not touch the Network Camera during a lightning storm.
- Do not drop the Network Camera.
- Replacing or failing to properly install the waterproof components, e.g., cables or cable glands, will void our IP65/66/67 warranty.
Product Usage Instructions
Step 1: Installation
- Choose a stable surface to place your Network Camera on.
- Refer to the Quick Installation Guide for step-by-step instructions on how to install your Network Camera.
- Make sure to properly install the waterproof components, e.g., cables or cable glands, to ensure the waterproof rating of IP65/66/67 is maintained.
Step 2: Power On
- Connect the Network Camera to a power source.
- Refer to the Quick Installation Guide for step-by-step instructions on how to connect your Network Camera to a power source.
Step 3: Network Connection
- Connect the Network Camera to your LAN network.
- Refer to the Quick Installation Guide for step-by-step
instructions on how to connect your Network Camera to your LAN
network.
Step 4: Usage
- Refer to the user manual for the operating temperature.
- Avoid touching the Network Camera during a lightning storm.
- Do not insert sharp or very small objects into the Network Camera.
- If smoke or unusual odors are detected, power off the Network Camera immediately.
Warning Before Installation
- Power off the Network Camera as soon as smoke or unusual odors are detected.
- Do not place the Network Camera on unsteady surfaces.
- Do not insert sharp or tiny objects into the Network Camera.
- Replacing or failing to properly install the waterproof components, e.g., cables or cable glands, will void our IP65/66/67 warranty.
- Refer to your user’s manual for the operating temperature.
- Do not touch the Network Camera during a lightning storm.
- Do not drop the Network Camera.
Package Contents
****Hardware Installation
Please contact authorized distributors for warranty and RMA service. Visit
https://www.vivotek.com/support/warranty-rma
All specifications are subject to change without noice. Copyright © 2021
VIVOTEK INC. All rights reserved.
VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C. |T:
+886-2-82455282| F: +886-2-82455532| E:
[email protected]
VIVOTEK Europe
Zandsteen 15, 2132 MZ Hoofddorp Delta Electronics
T: +31 (0)20 800 3817 E:
[email protected]
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|T: 408-773-8686| F:
408-773-8298| E:
[email protected]