SIGNATURE HARDWARE 953467 Risom During Colgante Hanging Light Instruction Manual

RISOM PENDANT COLGANTE
LUMINAIRE SUSPENDU
SKU: 953467

953467 Riso During Colgate Hanging Light

BEFORE YOU BEGIN
We recommend consulting a professional if you are unfamiliar with installing electric fixtures. Signature Hardware accepts no liability for any damage to the faucet, plumbing, sink, counter top, or for personal injury during installation.
Observe all local plumbing and building codes.
Unpack and inspect the product for shipping damage.
If any damage is found, contact our Customer Relations team via live chat at www.signaturehardware.com or by emailing support@siganturehardware.com.

GETTING STARTED

Ensure that you have gathered all the required materials that are needed for the installation.
ADDITIONAL QUESTIONS?
Still need help? Check out our Help Center at www.signaturehardware.com for product and warranty information, or contact us through live chat or by emailing support@signaturehardware.com.

FOR YOUR SAFETY

WARNING: Be sure the electricity to the wires you are working on is shut off, either the fuse is removed or the circuit breaker is shut off. You don’t need special tools to install this fixture. Be sure to follow the steps in the order given. Under no circumstances should a fixture be hung on house electrical wires, nor should a swag type fixture be installed on a ceiling which contains a radiant type heating system. Read instructions carefully. If you are unclear as to how to proceed, consult a qualified electrician.

CARE INSTRUCTIONS

To clean, wipe fixture with a soft cloth. Clean glass with a mild soap. Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.

TOOLS AND MATERIALS

| Safety goggle
---|---
| Step ladder
| Wire strippers
| Wire cutters
| Phillips screwdriver
| Flathead screwdriver

|  Light Bulb (A19 60 watt maximum)  

 **SAVE THIS MANUAL:** RETAIN FOR CONSUMER’S USE.  
READ THESE INSTRUCTIONS COMPLETELY BEFORE  
INSTALLING THE PRODUCT: FOR PRODUCT OR  
INSTALLATION QUESTIONS PLEASE CALL  
CUSTOMER SERVICE AT 1-[800-221-3379](https://phone.gd/phone/800-221-3379).  
 **INSTALLATION (FIG 1)**

  1. Carefully push fixture wires up through bottom of center stem (P). Pull fixture wires out of top of center stem (P). Pull fixture wires taut. Screw bottom of center stem (P) onto top of fixture body (O).
  2. Determine desired hanging height of fixture. Select the quantity of stems (M) to achieve that height.
  3. Carefully push fixture wires from top of fixture body (O) up through bottom of stem (M). Pull fixture wires out of top of stem (M). Pull wires taut.
  4. Carefully push fixture wires through remaining stems (M). Thread stems (M) together carefully keeping fixture wires taut.
  5. From last stem (M), push fixture wires up through swivel (S) attached to canopy (D). Carefully pull fixture wires up through canopy (D). Keep fixture wires pulled taut.
  6. Screw last stem (M) onto swivel (S) on canopy (D).  
 **INSTALLATION (FIG 2)**

  7. Carefully pull house wires down out of junction box so house wires are easily accessible to connect fixture wires.
  8. Position mounting bracket (A) so threaded ends of attached fixture mounting screws (E) are facing down towards floor.
  9. Carefully pull house wires through center hole in mounting bracket (A).
  10. Align small holes in mounting bracket (A) with holes in junction box.
  11. Thread each junction box screw (B) into each hole in mounting bracket (A) and into holes in junction box. Tighten junction box screws (B) to secure mounting bracket (A) to junction box.  
Connect Black or Red Supply Wire (Lead Wire) to:| Connect White Supply Wire
(Neutral Wire) to:  
---|---  
Black wire| White wire  
*Parallel wire (round or smooth)| *Parallel wire (square or ridged)  
Clear brown, gold or black wire without tracer| Clear brown, gold or black
wire with tracer  
Insulated wire (other than green) with copper conductor| Insulated wire (other
than green) with silver conductor  

* When parallel wires are used, the neutral wire is ridged down its length and the other wire is round and smooth (see illus.). **INSTALLATION (FIG 3)**

  12. Strip 3/4” of insulation from ends of fixture wires.
  13. Twist the end of fixture white wire to the end of house white wire together. Twist a wire nut onto ends of wires. Wrap electrical tape around wire nut and wires to secure connection. Twist the end of fixture black wire and the end of house black wire together. Twist a wire nut onto the ends of wires. Wrap electrical tape around wire nut and wires to secure connection. Loosen ground screw on mounting bracket (A). Wrap house ground wire around ground screw leaving enough ground wire to attach to fixture ground wire. Twist the end of fixture ground wire to the end of house ground wire together. Twist a wire nut onto ends of wires. Wrap electrical tape around wire nut and wires to secure connection.  
 **Note:** If you have electrical questions consult your local electrical code
for approved grounding methods.

  14. After wires are connected, carefully tuck wires inside junction box.  
 **INSTALLATION (FIG 4)  
**

  15. Carefully raise fixture up to ceiling. Place canopy (D) over mounting bracket (A). Pass holes in canopy (D) over ends of fixture mounting screws (E).
  16. Screw one threaded cap (F) onto each fixture mounting screw (E). Tighten threaded caps (F) to secure fixture to ceiling. DO NOT over tighten.
  17. Raise shade (K) up to fixture. Pass hole in bracket in shade (K) over socket. Thread socket ring (L) onto socket. Tighten socket ring (L) to secure shade (K) to fixture.
  18. Screw recommended bulb (E26 Edison bulb type, not included) into socket. Verify correct bulb wattage marked on socket of fixture.  
 **WARNING:** DO NOT exceed maximum bulb wattage.

 **REVISED: 11/29/2021**  
 **CODES: PHPL3421**  
 **1.855.715.1800**  
[ **signaturehardware.com**](http://signaturehardware.com)

###  Documents / Resources

[](/m/5ea083d701821e5b0827b7748bbb775ebd353d723c9c5e399b9c8adde62f62ba)|
[SIGNATURE HARDWARE 953467 Risom During Colgante Hanging
Light](/m/5ea083d701821e5b0827b7748bbb775ebd353d723c9c5e399b9c8adde62f62ba_optim.pdf)
[pdf] Instruction Manual  
953467 Risom During Colgante Hanging Light, 953467, Risom During Colgante
Hanging Light, Colgante Hanging Light, Hanging Light  
---|---  

#### References

  * [ Signature Hardware - Shop Unique, Quality Decor](http://www.signaturehardware.com "Signature Hardware - Shop Unique, Quality Decor")

## Read User Manual Online (PDF format)

[Read User Manual Online (PDF format)  >>](/pdf/157613-signature-hardware-953467-risom-during-colgante-hanging-light-instruction-manual-pdf)

## Download This Manual (PDF format)

[Download this manual  >>](https://manuals.plus/m/5ea083d701821e5b0827b7748bbb775ebd353d723c9c5e399b9c8adde62f62ba_optim.pdf)