SIGNATURE HARDWARE 946600 Orchard Pendant Light Single Light Opal Shade Instruction Manual
- June 10, 2024
- Signature Hardware
Table of Contents
SIGNATURE HARDWARE 946600 Orchard Pendant Light Single Light Opal Shade
ORCHARD PENDANT LIGHT – SINGLE LIGHT OPAL SHADE
SKU: 946600 PHPL6571, PHPL6571WGLS
Features
- Installation Type: Ceiling Mount
- Design: Traditional
- Material: Steel
- Width: 12″
- Height: 15-3/4″
- Base Plate Height: 1″
- Base Plate Diameter: 4-7/8″
- Mounting Hardware Included: Yes
- Shade Finish: Clear
- Shade Material: Glass
- Number of Bulbs: 1
- Location Type: Suitable for Dry Locations
- Bulbs Included: No
- Bulb Type: Medium E-26
- Wattage per Bulb: 60
CODES/STANDARDS: UL 1598 / CSA C22.2 No
250.0
Warranty: See Website For Warranty Information signaturehardware.com/warranty
Note: All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations.
Product Usage Instructions
- Inspect the package for any damage or missing parts. If any are found, contact the manufacturer immediately.
- Ensure that the power is off at the electrical breaker or fuse box before installation.
- Attach the mounting bracket to the electrical box in the ceiling using the provided screws and hardware.
- Thread the electrical wires through the center hole of the mounting bracket.
- Connect the electrical wires from the pendant light fixture to the electrical wires from the ceiling box. Use wire nuts to secure the connections.
- Attach the pendant light fixture to the mounting bracket using the provided screws and hardware.
- Install a light bulb with a maximum wattage of 60W, and ensure that it is securely in place.
- Turn on the power and test the light fixture to ensure proper installation and functionality.
Note: This product is suitable for dry locations only. Do not install in damp or wet areas.
SKU: 946600
PHPL6571,PHPL6571WGLS
FEATURES
- Installation Type: Ceiling Mount
- Design: Traditional
- Material: Steel
- Width: 12″
- Height: 15-3/4″
- Base Plate Height: 1″
- Base Plate Diameter: 4-7/8″
- Mounting Hardware Included: Yes
- Shade Finish: Clear
- Shade Material: Glass
- Number of Bulbs: 1
- Location Type: Suitable for Dry Locations Bulbs
- Included: No Bulb
- Type: Medium E-26
- Wattage per Bulb: 60
CODES/STANDARDS
UL 1598 / CSA C22.2 No 250.0
All dimensions and specifications are nominal and may vary. Use actual products
for accuracy in critical situations.
See Website For Warranty Information
signaturehardware.com/warranty
signaturehardware.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>