CALIFORNIA TRIMMER RC190-M800 19 Inch Cutting Swath Instruction Manual

CALIFORNIA TRIMMER RC190-M800 19 Inch Cutting Swath

Product Information

HOVER MOWER RC190-M800
The HOVER MOWER RC190-M800 is a lightweight and powerful hover mower that is ideal for mowing steep and hard-to-reach lawn areas. The mower features a 19-inch cutting swath and is powered by a Maruyama CER800U 2-Stroke engine with 3.5 HP / 2.6 KW @ 4200 RPM. The mower is designed to provide excellent cutting performance at steep angles for a wide variety of commercial, golf course, and residential applications.

• The mower’s cutting blades are 2-sided reversible and made up of 3 x Stainless Steel Flail and a single Steel Bar Type
• The deck is made up of ABS Injection Molded Plastic that is chemical and UV resistant.
• The handles are made up of large diameter tube steel with a 52-inch reach.
• The impeller is 14 inches in diameter and made up of high-impact plastic.
• The mower weighs around 37 lbs (16.8 kg).
• The cutting height is adjustable between 1.25 – 2.0 inches (32-50 mm) for the standard and 0.75 – 2.0 inches (20-50 mm) for the extended cut height (LC-190 Low Cut Kit required).
• The fuel tank capacity is around 67.6 fl. oz / 2.0 liters.

OPTIONAL ACCESSORIES
Transport Wheels / 18” Handle Extension / Lift Kit:

Cutting Blades

Features & Specifications

• Engine: Maruyama CER800U 2-Stroke
• Warranty: Engine – 5 Years, Non-Engine – 2 Yrs Residential 1 Yr Commercial
• Cutting width: 19 inches (48 cm)
• Deck: ABS Injection Molded Plastic Chemical and UV Resistant
• Handles: Large Diameter Tube Steel 52 inches (132 cm) Reach
• Impeller: 14 Dia. High-Impact Plastic
• Dry Weight: 37 lbs (16.8 kg)
• Cutting Blades: 2-Sided Reversible – 3 x Stainless Steel Flail
  • Single Steel Bar Type
• *Cutting Height:** Adjustable – Standard: 1.25 – 2.0 inches (32-50 mm), Extended (LC-190 Low Cut Kit required): 0.75 – 2.0 inches (20-50 mm)

*Blade position as measured from the bottom of the deck. Optional lift kit adds 1.9 inches (48mm). Actual grass cut height is affected by hovering height, surface condition, and grass type.

Product Usage Instructions

Before using the HOVER MOWER RC190-M800, make sure to read the user manual carefully and follow all safety precautions.

Mowing Instructions:

1. Check the fuel level before starting the mower and fill up if necessary.
2. Start the mower by pulling the starter cord gently but firmly.
3. Adjust the cutting height according to your preference using the adjustable cutting height feature.
4. Gently hover the mower over the grass surface to start mowing.
5. Move in multiple directions over grass surfaces as the mower is extremely maneuverable and can easily glide over grass surfaces.
6. As you move, the mower will mulch the grass clippings and evenly distribute them on the soil surface.
7. When you finish mowing, stop the engine using the engine stop lever.

Cleaning and Maintenance

1. After every use, clean the mower’s blades and deck to keep it in good condition.
2. Check the fuel level and refill if necessary before storing the mower.
3. Store the mower in a dry and secure place to prevent damage.
4. Regularly inspect and replace the cutting blades when needed to ensure optimal performance.
5. Regularly maintain the engine as per the manufacturer’s instructions and schedule.

Following these instructions will ensure that you can use your HOVER MOWER RC190-M800 safely and effectively for a long time.

THE ULTIMATE IN MOWUNG MANEUVERABILITY

This lightweight yet powerful hover mower floats on a cushion of air and is designed to provide excellent cutting performance at steep angles for a wide variety of commercial, golf course and residential applications. It’s extremely maneuverable as it can easily glide in multiple directions over grass surfaces and it mulches as it cuts so the fine clippings get to the soil surface. The 52” handles move freely for an effective reach on sloped areas and near water lines. A convenient locking lever holds the handles in an upright position when not in use. An ergonomically designed grip provides comfortable and stable control while the engine stop lever is easily held and released for added safety.

Evergreen Turf Equipment ▪ 1028 4th St SW / Ste. A ▪ Auburn, WA 98001
P:253-333-3345
F:253-414-1293
W: caltrimmer.com

References

• California Trimmer - Precision Reel Mowers Since 1935

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>